服务热线:400-635-0567

陶瓷色料检测

发布时间:2023-10-28 22:09:42

点击量:0

军工检测 其他检测

JC/T 1047-2007 用电熔氧化锆

本标准规定了陶瓷色料用电熔氧化锆的要求、试验方法、检验规则以及标志、包装、运输和储存。 本标准适用于电熔法生产的工业氧化锆,该产品主要用于陶瓷色料行业。 分子式ZrO2 相对分子质量:123.22(按2001国际相对原子量

Fused zirconia used for ceramics pigment

JC/T 1046.2-2007 建筑卫生 第2部分:建筑卫生

本标准规定了建筑卫生陶瓷坯、釉用色料术语、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于建筑卫生陶瓷用色料

Glazes and stains for building and sanitary ceramics Part 2: Stains for building and sanitary ceramics

T/ZAMEE 15-2023 不锈钢酸渣资源化利用制成黑添加剂

本文件规定了不锈钢酸渣处理处置的一般要求、制成黑色陶瓷色料添加剂方法与环境保护要求。 本文件适用于不锈钢酸渣资源化利用制成黑色陶瓷色料添加剂的一般要求和方法,其他表面处理及印刷线路板行业产生的废渣可参照使用

Black ceramic pigment additives made from stainless steel acid slag

GB/T 38985-2020 液体性能技术要求

本标准规定了陶瓷液体色料的分类、技术要求、试验方法、抽样、判定和检验规则、标志、包装、运输和贮存。 本标准适用于需要经过高温烧成形成装饰图案的陶瓷液体色料

The character requirements for ceramic liquid pigments

GB/T 4739-1995 日用度测定方法

本标准规定了日用陶瓷颜料色度的测量条件及测量方法。 本标准适用于一般日用陶瓷颜料,不适用于含有荧光物质及带有金属光泽的陶瓷颜料

Methods for measuring the colorimetry of ceramic pigment

GB/T 4739-2015 日用度测定方法

本标准规定了日用陶瓷颜料色度的测定条件及测定方法。 本标准适用于日用陶瓷颜料(以下简称陶瓷颜料),不适用于含有荧光物质及带有金属光泽的陶瓷颜料

Test method for measuring the colorimetry of ceramic pigment

GB/T 38904-2020 液体元素含量测定分析方法

本标准规定了陶瓷液体色料元素含量测定分析方法的试剂、仪器和设备、样品的制备、分析方法、质量控制和试验报告。 本标准适用于陶瓷液体色料产品中元素含量的测定。 可分析陶瓷液体色料中硅、铝、铁、钙、镁、钾、钠、钛、锂、硼、锌、铅、镨、锆、锰、锡、镉、铬、钴、金、银、锑、硒、铈等元素的含量

Methods for elemental analysis of ceramic liquid pigments

ASTM C32-93(1999)e1 烧结比重的标准试验方法

1.1 This specification covers brick intended for use in (1) drainage structures for the conveyance of sewage, industrial wastes, and storm water

Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)

ASTM C329-88(2020 烧结比重的标准试验方法

1.1 This test method covers the determination of specific gravity of fired ceramic whiteware materials under prescribed conditions. NOTE 1—This test

Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials

KS L 1201-2009 白的比重测定方法

이 표준은 소성된 도자기 재질의 비중 측정 방법에 대하여 규정한다

Testing method for specific gravity of fired whiteware materials

KS L 1201-1999 白的比重测定方法

This Korean Industrial Standard(1)specifies the testing method for specific gravity of whiteware materials fired under specific condition. Note (1

Testing method for specific gravity of fired whiteware materials

JC/T 1046.1-2007 建筑卫生 第1部分:建筑卫生用釉

本标准规定了建筑陶瓷卫生陶瓷用釉料的术语、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于建筑卫生陶瓷用釉料与熔块

Glazes and stains for building and sanitary ceramics Part 1: Glazes for building and sanitary ceramics

QB/T 1967.3-2017 白化学成分分析方法

本部分规定了白色陶瓷颜料中硅、铝、钙、镁、钾、钠、锂、硼、锌、铅、锆、铈等元素及氧化物的分析方法。 本部分适用于白色陶瓷颜料的化学成分分析

Test method for chemical composition analysis of white ceramic pigment

QB/T 1967.5-2017 黑化学成分分析方法

本标准规定了黑色陶瓷颜料中硅、铝、铁、钙、镁、钾、钠、硼、锌、铅、钛、锰、锡、铬、钴等氧化物的分析方法。 本标准适用于黑色陶瓷颜料的化学成分分析

Test method for chemical composition analysis of black ceramic pigment

SN/T 4312-2015 中稀土总量的测定 电感耦合等离子体原子发射光谱法

Determination of Total Rare Earth in Ceramic Color Glazes by Inductively Coupled Plasma Atomic Emission Spectrometry

JC/T 1047-2007 用电熔氧化锆

本标准规定了陶瓷色料用电熔氧化锆的要求、试验方法、检验规则以及标志、包装、运输和储存。 本标准适用于电熔法生产的工业氧化锆,该产品主要用于陶瓷色料行业。 分子式ZrO2 相对分子质量:123.22(按2001国际相对原子量

Fused zirconia used for ceramics pigment

JC/T 1046.2-2007 建筑卫生 第2部分:建筑卫生

本标准规定了建筑卫生陶瓷坯、釉用色料术语、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于建筑卫生陶瓷用色料

Glazes and stains for building and sanitary ceramics Part 2: Stains for building and sanitary ceramics

T/ZAMEE 15-2023 不锈钢酸渣资源化利用制成黑添加剂

本文件规定了不锈钢酸渣处理处置的一般要求、制成黑色陶瓷色料添加剂方法与环境保护要求。 本文件适用于不锈钢酸渣资源化利用制成黑色陶瓷色料添加剂的一般要求和方法,其他表面处理及印刷线路板行业产生的废渣可参照使用

Black ceramic pigment additives made from stainless steel acid slag

GB/T 38985-2020 液体性能技术要求

本标准规定了陶瓷液体色料的分类、技术要求、试验方法、抽样、判定和检验规则、标志、包装、运输和贮存。 本标准适用于需要经过高温烧成形成装饰图案的陶瓷液体色料

The character requirements for ceramic liquid pigments

GB/T 4739-1995 日用度测定方法

本标准规定了日用陶瓷颜料色度的测量条件及测量方法。 本标准适用于一般日用陶瓷颜料,不适用于含有荧光物质及带有金属光泽的陶瓷颜料

Methods for measuring the colorimetry of ceramic pigment

GB/T 4739-2015 日用度测定方法

本标准规定了日用陶瓷颜料色度的测定条件及测定方法。 本标准适用于日用陶瓷颜料(以下简称陶瓷颜料),不适用于含有荧光物质及带有金属光泽的陶瓷颜料

Test method for measuring the colorimetry of ceramic pigment

GB/T 38904-2020 液体元素含量测定分析方法

本标准规定了陶瓷液体色料元素含量测定分析方法的试剂、仪器和设备、样品的制备、分析方法、质量控制和试验报告。 本标准适用于陶瓷液体色料产品中元素含量的测定。 可分析陶瓷液体色料中硅、铝、铁、钙、镁、钾、钠、钛、锂、硼、锌、铅、镨、锆、锰、锡、镉、铬、钴、金、银、锑、硒、铈等元素的含量

Methods for elemental analysis of ceramic liquid pigments

ASTM C32-93(1999)e1 烧结比重的标准试验方法

1.1 This specification covers brick intended for use in (1) drainage structures for the conveyance of sewage, industrial wastes, and storm water

Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)

ASTM C329-88(2020 烧结比重的标准试验方法

1.1 This test method covers the determination of specific gravity of fired ceramic whiteware materials under prescribed conditions. NOTE 1—This test

Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials

KS L 1201-2009 白的比重测定方法

이 표준은 소성된 도자기 재질의 비중 측정 방법에 대하여 규정한다

Testing method for specific gravity of fired whiteware materials

KS L 1201-1999 白的比重测定方法

This Korean Industrial Standard(1)specifies the testing method for specific gravity of whiteware materials fired under specific condition. Note (1

Testing method for specific gravity of fired whiteware materials

JC/T 1046.1-2007 建筑卫生 第1部分:建筑卫生用釉

本标准规定了建筑陶瓷卫生陶瓷用釉料的术语、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于建筑卫生陶瓷用釉料与熔块

Glazes and stains for building and sanitary ceramics Part 1: Glazes for building and sanitary ceramics

QB/T 1967.3-2017 白化学成分分析方法

本部分规定了白色陶瓷颜料中硅、铝、钙、镁、钾、钠、锂、硼、锌、铅、锆、铈等元素及氧化物的分析方法。 本部分适用于白色陶瓷颜料的化学成分分析

Test method for chemical composition analysis of white ceramic pigment

QB/T 1967.5-2017 黑化学成分分析方法

本标准规定了黑色陶瓷颜料中硅、铝、铁、钙、镁、钾、钠、硼、锌、铅、钛、锰、锡、铬、钴等氧化物的分析方法。 本标准适用于黑色陶瓷颜料的化学成分分析

Test method for chemical composition analysis of black ceramic pigment

SN/T 4312-2015 中稀土总量的测定 电感耦合等离子体原子发射光谱法

Determination of Total Rare Earth in Ceramic Color Glazes by Inductively Coupled Plasma Atomic Emission Spectrometry

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区南三环西路16号2号楼27层
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询