氟硅唑检测

GB 23200.53-2016 食品中氟硅唑残留量的测定 气相色谱-质谱法

National food safety standards— Determination of flusilazole residue in foods Gas chromatography-mass spectrometry

T/SHDSGY 087-2022 氟硅橡胶

本文件规定了氟硅橡胶的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于氟硅橡胶的生产制造。

Fluorosilicone rubber

T/SDNY 035-2022 氟硅唑乳油有效成分含量测定

本文件规定了氟硅唑乳油有效成分含量的液相色谱测定方法。 本文件适用于氟硅唑乳油中氟硅唑含量的测定。

NY/T 3996-2021 氟硅唑水乳剂

NY/T 3997-2021 氟硅唑微乳剂

NY/T 3995-2021 氟硅唑乳油

T/FSI 071-2021 加成型液体氟硅橡胶

本文件规定了加成型液体氟硅橡胶的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于以乙烯基氟硅油为基础材料，添加各种填料和助剂，经混炼而制得的加成型液体氟硅 橡胶。

T/FSI 062-2021 低粘度羟基氟硅油

本文件适用于以1,3,5-三甲基-1,3,5-三(3,3,3-三氟丙基)环三硅氧烷为原料，经催化缩合、分离等过程 制得的低粘度羟基封端甲基三氟丙基聚硅氧烷，或称低粘度羟基氟硅油。 本文件规定了低粘度羟基氟硅油的要求、试验方法、检验规则及标志、包装、运输和贮存。

HG/T 5753-2020 室温固化（硫化）氟硅密封胶

NY/T 3774-2020 氟硅唑原药

T/FSI 055-2020 汽车涡轮增压器软管用氟硅橡胶

本标准规定了汽车涡轮增压器软管用氟硅橡胶的技术要求、试验方法、检验规则、标志、包装、运 输和贮存。 本标准适用于以氟硅生胶为基础材料，添加各种填料和助剂，经混炼而制得的汽车涡轮增压器软管 用氟硅橡胶。

T/FSI 040-2019 氟硅混炼胶

本标准规定了氟硅混炼胶的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以氟硅生胶为基础材料，添加各种填料和助剂，经混炼而制得的氟硅混炼胶。

T/FSI 044-2019 端乙烯基氟硅油

本标准规定了端乙烯基氟硅油的产品结构式和型号、技术要求、试验方法、检验规则、标志、包装、 运输和贮存。 本标准适用于以三氟丙基甲基环三硅氧烷（D3F）、八甲基环四硅氧烷或六甲基环三硅氧烷或二甲 基硅氧烷混合环体原料，与乙烯基封端剂在催化剂作用下制备得到的端乙烯基氟硅油。

T/FSI 045-2019 甲基氟硅油

本标准规定了甲基氟硅油的产品结构式和型号、技术要求、试验方法、检验规则、标志、包装、运 输和贮存。 本标准适用于以三氟丙基甲基环三硅氧烷（D 3 F）、八甲基环四硅氧烷或六甲基环三硅氧烷或二甲 基硅氧烷混合环体原料，与甲基封端剂在催化剂作用下制备得到的甲基氟硅油。

T/FSI 029-2019 热硫化氟硅橡胶生胶

本标准规定了热硫化氟硅橡胶生胶产品的性能要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于以1,3,5-三甲基-1,3,5-三（三氟丙基）环三硅氧烷为主要原料，经本体聚合制得的分子量为60-120万及120万以上的的热硫化氟硅橡胶生胶。

KS C IEC 60684-3-136-2017(2022) 柔性绝缘套管.第3部分:各类套管规范.第136页:挤压氟硅套管.通用

Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 136: Extruded fluorosilicone sleeving — General purpose

NF L17-263-3-2015 航空航天系列. 氟硅橡胶 (FVMQ). 硬度80 IRHD

Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD

NF L17-263-1-2015 航空航天系列. 氟硅橡胶 (FVMQ). 硬度60 IRHD

Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD

NF L17-263-2-2015 航空航天系列. 氟硅橡胶 (FVMQ). 硬度70 IRHD

Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD

EN 3825-2014 航空航天系列.氟硅橡胶（氟硅橡胶）.60 IRHD硬度

This European Standard specifies the properties of fluorosilicone rubber (FVMQ)1), hardness 60 IRHD, for aerospace applications.

Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD

EN 3825-2014 航空航天系列.氟硅橡胶（氟硅橡胶）.60 IRHD硬度

This European Standard specifies the properties of fluorosilicone rubber (FVMQ)1), hardness 60 IRHD, for aerospace applications.

Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD

EN 3827-2014 航空航天系列.氟硅橡胶（氟硅橡胶）.80 IRHD硬度

This standard specifies the properties of fluorosilicone rubber (FVMQ)1), hardness 80 IRHD, for aerospace applications.

Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD

SAE AS 27198B-2014 MIL-DTL-25988氟硅橡胶槽模制AMS5516的302耐腐蚀钢粘结密封

Scope is unavailable.

SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988

SAE AMS 3325F-2014 耐燃料及耐油氟硅(FVMQ)橡胶,55-65

This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically for parts requiring resistance to jet fuel and lubricating oils, but usage is not limited to such applications. Generally, products are usable over a temperature range of -76 to +302 degrees F (-60 to +150 degrees C); each application, however, has to be considered individually.

Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 55 - 65

HB 20077-2011 航空用氟硅类密封剂规范

本规范规定了航空用氟硅类密封剂的要求、质量保证规定、交货准备及说明事项。本规范适用于航空用氟硅类密封剂。

Specification for fluorosilicone sealants for aviation

SAE AMS 7273D-2011 橡胶: 氟硅橡胶(FVMQ)高温燃料和密封在燃油系统和特殊内燃机油系统里的抗油剂

This specification covers a fluorosilicone (FVMQ) rubber in the form of molded rings. This product has been typicallyused -67 to +347 °F (-55 to +175 °C) in fuels and from -67 to +302 °F (-55 to +150 °C) in lubricating oils. This product is not recommended for use in most synthetic turbine lubricants, particularly high temperature stabilized. "HTS", engine oils (those confirming to MIL-PRF-23699 Class HTS, MIL-PRF-7808 Grade 4 and AS5780 Class HPC). The cross-section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness, but usage is not limited to such applications.

Rubber: Fluorosilicone (FVMQ) High Temperature Fuel and Oil Resistant For Seals in Fuel Systems and Specific Engine Oil Systems

SAE AMS 3328B-2010 耐燃料和汽油氟硅橡胶(FVMQ),35-45

This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically for parts requiring resistance to jet fuel and lubricating oils, but usage is not limited to such applications. Generally, products are usable over a temperature range of -76 to +302 °F (-60 to +150 °C); each application, however, has to be considered individually.

Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 35 - 45

SAE AMS 3329B-2010 高强度耐燃料和汽油的氟硅橡胶(FVMQ),45-55

This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically for parts requiring resistance to jet fuel and lubricating oils, but usage is not limited to such applications. Generally, products are usable over a temperature range of -76 to +302 °F (-60 to +150 °C). Each application, however, has to be considered individually.

Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant, High Strength 45 - 55

HG/T 2768-2009 工业氟硅酸镁

本标准规定了工业氟硅酸镁的要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于由氟硅酸与氧化镁反应制得的工业氟硅酸镁。该产品主要用作改善混凝土硬度和强度的硬化剂和防水剂，也用于硅石建筑物表面的氟风化处理、陶瓷的制造、织物防虫等。

Magnesium fluosilicate for industrial use

FORD WSD-M2D439-A-2009 IRHD硬度为55的耐氧化和含氧燃料的氟硅橡胶（FVMQ）***与标准FORD WSS-M99P1111-A一起使用***

RUBBER, FLUOROSILICONE (FVMQ) OXIDISED AND OXYGENATED FUEL RESISTANT, 55 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD ESF-M2D129-A-2009 硬度为50 A的氟硅橡胶***与标准FORD WSS-M99P1111-A一起使用***

FLUOROSILICONE RUBBER, 50 DUROMETER "A" HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***

SAE AMS 3327D-2009 耐高温燃料耐油氟硅(FVMQ)橡胶,70-80

This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, and molded shapes. These products have been used typically for parts requiring resistance to jet fuel and lubricating oils, but usage is not limited to such applications. Generally, products are usable over a temperature range of -76 to +302 °F (-60 to +150 °C) ; each application, however, has to be considered individually.

Fluorosilicone (FVMQ) Rubber, High Temperature Fuel and Oil Resistant 70-80

SAE AMS 3325E-2009 耐燃料及耐油氟硅(FVMQ)橡胶,55-65

This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically for parts requiring resistance to jet fuel and lubricating oils, but usage is not limited to such applications. Generally, products are usable over a temperature range of -76 to +302 °F (-60 to + 150 °C ); each application, however, has to be considered individually.

Fluorosilicone (FVMQ) Rubber, Fuel and Oil Resistant, 55-65

SN/T 2236-2008 进出口食品中氟硅唑残留量检测方法.气相色谱-质谱法

本标准规定了食品中氟硅唑残留量的气相色谱-质谱检测及确证方法。 本标准适用于大米、大豆、小菘菜、甜豌豆、梨、柑桔、花生、茶叶、牛肉、鸡肉、虾肉、蜂蜜中氟硅唑残留量的检测和确证。

Determination of flusilazole residues in food for import and export.GC-MS method

FORD WSS-M1C262-A-2008 聚四氟乙烯（PTFE）氟硅橡胶润滑脂***与标准FORD WSS-M99P1111-A一起使用***［使用:FORD WSS-M13P12-A,FORD WSS-M13P12-A,FORD WSS-M13P12-A］

GREASE, FLUOROSILICONE, PTFE ***TO BE USED WITH FORD WSS-M99P1111-A***

BS F 164-2006 用符合BS F 154氟硅橡胶材料制成的弹性环形密封圈("O"形圈)的特性.规范

This British Standard specifies requirements for elastomeric toroidal sealing rings (“O” rings) manufactured from fluorosilicone rubber material conforming to BS F 154. This material standard is to be used in conjunction with BS EN 3207 and SBAC TS 49.

Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from fluorosilicone rubber material released to BS F 154 - Specification

BS F 154-2006 氟硅橡胶板、模和挤压的特性.规范

This British Standard specifies requirements for fluorosilicone rubber material possessing excellent ozone resistance properties intended for the production of items such as sheet, mouldings and certain extrusions for use in sealing applications in contact with petroleum based fuels, hydraulic fluids and lubricants and with silicone and certain ester based fluids over the temperature range –60 °C to 150 °C1). For applications in air the material is suitable over the temperature range –60 °C to 180 °C. This material standard is to be used in conjunction with BS EN 3207.

Properties of fluorosilicone rubber sheet, mouldings and extrusions - Specification

KS C IEC 60684-3-136-2004 柔软绝缘套管.第3部分:各种型号套管的规范.第136节:通用挤压氟硅软管

이 규격은 플루오르 실리콘 고무를 사용하여 압출 가공에 의하여 성형한 비열수축 슬리빙의

Flexible insulating sleeving-Part 3:Specification for individual types of sleeving-Sheet 136:Extruded fluorosilicone sleeving-General purpose

FORD WSA-M2D401-A6-2004 耐充氧/氧化燃料的耐低温氟硅橡胶（FVMQ）***与标准FORD WSS-M99P1111-A一起使用***

FLUOROSILICONE (FVMQ), OXYGENATED/OXIDIZED FUEL RESISTANT, LOW TEMPERATURE RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***

FORD ESF-M2D129-A-2004 硬度为50 A的氟硅橡胶***与标准FORD WSS-M99P1111-A一起使用***

FLUOROSILICONE RUBBER, 50 DUROMETER"A" HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***