JB/T 8047-2007 V形块(架)
本标准规定了准确度级别为0级，1级和2级V形块的术语和定义、型式与基本参数、要求、检验方法、标志与包装等。 本标准适用于公称直径为3mm～300mm的轴类零件加工（或测量）时，作紧固（或定位）用的V形块
Vee blocks
JIS B 7540:1972 V形块
この規格は，機械部品の加工おょび測定に使用するVブロックのうちで，V面の角度90度のものについて規定する
Vee blocks
KS B 5245-2019 V形块
V blocks
KS B 5245-1987 V形块
V blocks
JB/T 8047-1995 V形架
Vee blocks
BS 3731:1987 V 形块规范
Hollow, solid, single and double vee blocks, normally with an included vee angle of 90
Specification for vee blocks
IS 2949-1974 普通 V 形块规范
Prescribes requirements of plain V-blocks and clamps used with them
ISO 16367:2008 冲压工具.导向板.U形块和V形块
This International Standard specifies the main dimensions and tolerances of guiding plates, U- and V-blocks, to be used in press tools. It also
Tools for pressing - Guide plates - U- and V-blocks
BS ISO 16367:2008(2011 压制工具 — 导向板 — U 形块和 V 形块
Tools for pressing — Guide plates — U - and V - blocks
KS B ISO 16367:2012 冲压工具.导向板.U形块和V形块
이 표준은 프레스 금형에서 사용하는 U 및 V 블록 가이드 플레이트의 치수 및 공차에 대하
Tools for pressing－Guide plates－U and V blocks
NF E63-144*NF ISO 16367:2008 冲压工具 导向板 U形块和V形块
Tools for pressing - Guide plates - U- and V-blocks
GB/T 34151-2017 冲模 导板 U形和V形块
Stamping dies—Guide plates—U-and V-blocks
NF E11-102:1992 测量仪表.V 形块规
Measuring instruments. Vee blocks.
DIN 2274:1981-10 检查V形块；设计、要求
Inspection vee blocks; designs, requirements / Note: To be replaced by DIN 2274 (2007-09).
DIN ISO 16367:2010 冲压工具.导向板.U形块和V形块(ISO 16367-2008)
Tools for pressing - Guide plates - U- and V-blocks (ISO 16367:2008)
JB/T 8047-2007 V形块(架)
本标准规定了准确度级别为0级，1级和2级V形块的术语和定义、型式与基本参数、要求、检验方法、标志与包装等。 本标准适用于公称直径为3mm～300mm的轴类零件加工（或测量）时，作紧固（或定位）用的V形块
Vee blocks
JIS B 7540:1972 V形块
この規格は，機械部品の加工おょび測定に使用するVブロックのうちで，V面の角度90度のものについて規定する
Vee blocks
KS B 5245-2019 V形块
V blocks
KS B 5245-1987 V形块
V blocks
JB/T 8047-1995 V形架
Vee blocks
BS 3731:1987 V 形块规范
Hollow, solid, single and double vee blocks, normally with an included vee angle of 90
Specification for vee blocks
IS 2949-1974 普通 V 形块规范
Prescribes requirements of plain V-blocks and clamps used with them
ISO 16367:2008 冲压工具.导向板.U形块和V形块
This International Standard specifies the main dimensions and tolerances of guiding plates, U- and V-blocks, to be used in press tools. It also
Tools for pressing - Guide plates - U- and V-blocks
BS ISO 16367:2008(2011 压制工具 — 导向板 — U 形块和 V 形块
Tools for pressing — Guide plates — U - and V - blocks
KS B ISO 16367:2012 冲压工具.导向板.U形块和V形块
이 표준은 프레스 금형에서 사용하는 U 및 V 블록 가이드 플레이트의 치수 및 공차에 대하
Tools for pressing－Guide plates－U and V blocks
NF E63-144*NF ISO 16367:2008 冲压工具 导向板 U形块和V形块
Tools for pressing - Guide plates - U- and V-blocks
GB/T 34151-2017 冲模 导板 U形和V形块
Stamping dies—Guide plates—U-and V-blocks
NF E11-102:1992 测量仪表.V 形块规
Measuring instruments. Vee blocks.
DIN 2274:1981-10 检查V形块；设计、要求
Inspection vee blocks; designs, requirements / Note: To be replaced by DIN 2274 (2007-09).
DIN ISO 16367:2010 冲压工具.导向板.U形块和V形块(ISO 16367-2008)
Tools for pressing - Guide plates - U- and V-blocks (ISO 16367:2008)
编辑：北检院编辑部
