服务热线:400-635-0567

电镀制品检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

JB/T 7991-2014 超硬磨料 代号和标记

本标准规定了电镀内圆切割片、电镀什锦锉、电镀磨头的代号和标记。本标准适用于金属结合剂超硬磨料制品电镀内圆切割片、电镀什锦锉、电镀磨头

Superabrasive products.Symbol and designation for electroplated products

GOST 9.314-1990 腐蚀和老化联合防护系统.用水和清洗方案.一般要求

Unified system of corrosion and ageing protection. Water for galvanic production and washing schemes. General requirements

EN 10202:2001 冷轧锡钢.锡钢铬/氧化铬钢;代替EN 10203-1991;合并勘误表-2003年10月[代替:CEN EN 10203]

This European Standard specifies requirements for tinmill products in the form of sheets or coils for subsequent cutting into sheets. Tinmill products

Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel

JB/T 11428-2013 超硬磨料 磨头

本标准规定了超硬磨料制品电镀磨头的形状与尺寸、技术要求、试验方法、检验规则、标志和包装。本标准适用于金属结合剂超硬磨料电镀磨头

Superabrasive products.Electroplated mounted points

JB/T 7991.4-2001 超硬磨料.磨头

本标准规定了电镀超硬磨料制品--磨头的形状、尺寸、技术要求、试验方法和检验规则。 本标准适用于电镀金属结合剂超硬磨料磨头

Electroplated superabrasive products.Mounted wheel

JB/T 6354-2006 超硬磨料 套料刀

本标准规定了电镀超硬磨料制品一套料刀的形状、代号、尺寸、技术要求、试验方法、检验规则、标志和包装。 本标准适用于电镀金属结合剂金刚石和立方氮化硼套料刀

Electroplated superabrasive products Digging tool

JB/T 7991.3-2001 超硬磨料.什锦锉

本标准规定了电镀超硬磨料制品--什锦锉的形状、尺寸、技术要求、试验方法和检验规则。 本标准适用于电镀金属结合剂超硬磨料什锦锉

Electroplated superabrasive products.Files

JB/T 7991.1-2001 超硬磨料.代号和标记

本标准规定了电镀超硬磨料制品的一般特征和形状代号。 本标准适用于电镀金属结合剂超硬磨料制品

Symbol and designation for electroplated superabrasive products

JB/T 11430-2013 超硬磨料 什锦锉

本标准规定了超硬磨料制品电镀什锦锉的尺寸名称及代号、形状与尺寸、技术要求、试验方法、检验规则、标志和包装。本标准适用于电镀金属结合剂超硬磨料什锦锉

Superabrasive products.Electroplated files

JB/T 11429-2013 超硬磨料 内圆切割锯片

本标准规定了超硬磨料制品电镀内圆切割锯片的形状、尺寸代号、技术要求、试验方法、检验规则、标志和包装。本标准适用于电镀金属结合剂超硬磨料内圆切割锯片

Superabrasive products.Electroplated inner slicing disc

JB/T 7991.2-2001 超硬磨料.内圆切割锯片

本标准规定了电镀超硬磨料制品--内圆切割锯片的形状、代号、尺寸、技术要求、试验方法和检验规则。 本标准适用于电镀金属结合剂超硬磨料内圆切割锯片

Electroplated superabrasive products.Inner slicing disc

JB/T 12543-2015 超硬磨料 金刚石线

本标准规定了电镀金刚石线的术语和定义、尺寸代号与产品标记、产品规格、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于硅材料、蓝宝石、精密陶瓷、玻璃、磁性材料等硬脆材料切割用的电镀金刚石线(以下简称金刚石线

Superabrasive products.Electroplated diamond wire

NF T23-301:1982 化学.硫酸锡(用)

Chemical products. Stannous sulphate (for electroplating).

prEN 10152-1991 锌冷轧钢板.交货技术条件

Electrolytically zinc coated cold rolled steel flat products; technical delivery conditions

ASTM A599/A599M-07(2012 锡锡的冷轧薄板标准规格

1.1 This specification covers cold-rolled steel sheet in coils or in cut lengths

Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet

JB/T 7991-2014 超硬磨料 代号和标记

本标准规定了电镀内圆切割片、电镀什锦锉、电镀磨头的代号和标记。本标准适用于金属结合剂超硬磨料制品电镀内圆切割片、电镀什锦锉、电镀磨头

Superabrasive products.Symbol and designation for electroplated products

GOST 9.314-1990 腐蚀和老化联合防护系统.用水和清洗方案.一般要求

Unified system of corrosion and ageing protection. Water for galvanic production and washing schemes. General requirements

EN 10202:2001 冷轧锡钢.锡钢铬/氧化铬钢;代替EN 10203-1991;合并勘误表-2003年10月[代替:CEN EN 10203]

This European Standard specifies requirements for tinmill products in the form of sheets or coils for subsequent cutting into sheets. Tinmill products

Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel

JB/T 11428-2013 超硬磨料 磨头

本标准规定了超硬磨料制品电镀磨头的形状与尺寸、技术要求、试验方法、检验规则、标志和包装。本标准适用于金属结合剂超硬磨料电镀磨头

Superabrasive products.Electroplated mounted points

JB/T 7991.4-2001 超硬磨料.磨头

本标准规定了电镀超硬磨料制品--磨头的形状、尺寸、技术要求、试验方法和检验规则。 本标准适用于电镀金属结合剂超硬磨料磨头

Electroplated superabrasive products.Mounted wheel

JB/T 6354-2006 超硬磨料 套料刀

本标准规定了电镀超硬磨料制品一套料刀的形状、代号、尺寸、技术要求、试验方法、检验规则、标志和包装。 本标准适用于电镀金属结合剂金刚石和立方氮化硼套料刀

Electroplated superabrasive products Digging tool

JB/T 7991.3-2001 超硬磨料.什锦锉

本标准规定了电镀超硬磨料制品--什锦锉的形状、尺寸、技术要求、试验方法和检验规则。 本标准适用于电镀金属结合剂超硬磨料什锦锉

Electroplated superabrasive products.Files

JB/T 7991.1-2001 超硬磨料.代号和标记

本标准规定了电镀超硬磨料制品的一般特征和形状代号。 本标准适用于电镀金属结合剂超硬磨料制品

Symbol and designation for electroplated superabrasive products

JB/T 11430-2013 超硬磨料 什锦锉

本标准规定了超硬磨料制品电镀什锦锉的尺寸名称及代号、形状与尺寸、技术要求、试验方法、检验规则、标志和包装。本标准适用于电镀金属结合剂超硬磨料什锦锉

Superabrasive products.Electroplated files

JB/T 11429-2013 超硬磨料 内圆切割锯片

本标准规定了超硬磨料制品电镀内圆切割锯片的形状、尺寸代号、技术要求、试验方法、检验规则、标志和包装。本标准适用于电镀金属结合剂超硬磨料内圆切割锯片

Superabrasive products.Electroplated inner slicing disc

JB/T 7991.2-2001 超硬磨料.内圆切割锯片

本标准规定了电镀超硬磨料制品--内圆切割锯片的形状、代号、尺寸、技术要求、试验方法和检验规则。 本标准适用于电镀金属结合剂超硬磨料内圆切割锯片

Electroplated superabrasive products.Inner slicing disc

JB/T 12543-2015 超硬磨料 金刚石线

本标准规定了电镀金刚石线的术语和定义、尺寸代号与产品标记、产品规格、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于硅材料、蓝宝石、精密陶瓷、玻璃、磁性材料等硬脆材料切割用的电镀金刚石线(以下简称金刚石线

Superabrasive products.Electroplated diamond wire

NF T23-301:1982 化学.硫酸锡(用)

Chemical products. Stannous sulphate (for electroplating).

prEN 10152-1991 锌冷轧钢板.交货技术条件

Electrolytically zinc coated cold rolled steel flat products; technical delivery conditions

ASTM A599/A599M-07(2012 锡锡的冷轧薄板标准规格

1.1 This specification covers cold-rolled steel sheet in coils or in cut lengths

Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询