不锈钢（金属丝）检测

BS EN ISO 6931-1:2020 弹簧用不锈钢 金属丝

Stainless steels for springs. Wire

GB/T 25863-2010 不锈钢烧结金属丝网多孔材料及其元件

本标准规定了不锈钢烧结金属丝网多孔材料及其元件的要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于将编制成形的不锈钢金属丝网多层复合后，采用轧制成形和真空烧结工艺制成的不锈钢烧结金属丝网多孔材料及其元件。 用其他材料制作的多孔材料及其元件产品，亦可参照执行

Stainless steel sintered metal mesh materials and components

ANSI/AWS A5.22/A5.22M:2012 不锈钢焊芯和金属芯焊丝和棒用规范

Classification and other requirements are specified for numerous grades of flux cored and metal cored stainless steel electrodes and rods

Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods

EN ISO 7046-2:2011 H型或Z型十字槽沉头螺钉(通用头型).产品等级A级.第2部分:8.8类属性钢螺钉,不锈钢螺丝及有色金属螺钉

This European Standard specifies a laboratory method to determine the leaching behaviour of substances from coatings into water over defined time

Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)

BULLETIN 460-2001 不锈钢药芯焊缝的高温开裂和性能及铋的作用: ）不锈钢药芯焊丝焊缝金属的高温性能研究

This Bulletin reports on activities of two important organizations concerned with welding and the performance of welded components. The Japan Welding

HIGH TEMPERATURE CRACKING AND PROPERTIES OF STAINLESS STEEL FLUX-CORED WELDS AND EFFECTS OF BISMUTH: )INVESTIGATION ON HIGH TEMPERATURE PROPERTIES OF WELD METALS OF STAINLESS STEEL FLUX-CORED WIRES AN

ASTM F2581-07 外科植入物用锻制氮增强的11锰-17铬-3钼低镍不锈钢合金棒材和金属丝的标准规范

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened

Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)

DIN EN ISO 7046-2:2011 H型或Z型十字槽沉头螺钉(通用头型).产品等级A级.第2部分:8.8类属性钢螺钉,不锈钢螺丝及有色金属螺钉(ISO 7046-2-2011).德文版 EN ISO 7046-2-2011

Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011); German version EN ISO 7046-2:2011

DVS 0941-3-2012 不锈钢和耐热钢金属电弧焊用实心焊丝

GB/T 4240-2019 不锈钢丝

本标准规定了不锈俩丝的术语和定义订货内容`分类与和号尺寸\外形、贰术要求试验方法`检验规则包装、标志和质量证明书。 本标准适用于不锈钢丝(以下简称钢丝)，但不包括冷项欠用和焊接用不锈钢丝,不包括奥氏体型和，沉淀硬化型的不锈弹筑钢丝

Stainless steel wires

GB/T 4240-2009 不锈钢丝

本标准规定了不锈钢丝的术语和定义、订货内容、分类与牌号、尺寸、外形及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本标准适用于不锈钢丝(以下简称钢丝)，但不包括奥氏体型和沉淀硬化型不锈弹簧钢丝、冷顶锻用和焊接用不锈钢丝

Stainless steel wires

KS D 3703-2007 不锈钢钢丝

이 규격은 스테인리스 강선 및 약 10.5 % 이상의 크롬을 포함하는 내열 강선(이하 선이

Stainless steel wires

GB/T 4240-1993 不锈钢丝

本标准规定了不锈钢丝分类、牌号、尺寸、外形、技术要求、试验方法、检验规则、包装、标志和质量证明书等。 本标准适用于不锈钢丝（以下简称钢丝），但不适用于弹簧、冷顶锻和焊接用不锈钢丝

Stainless steel wires

JIS G 4309:1994 不锈钢丝

Stainless steel wires

JIS G 4309:1999 不锈钢丝

この規格は，ステンレス鋼線及び約10.5%以上のクロムを含む耐熱鋼線似下，線という。)について規定する。ただし，ばね用ステンレス鋼線及び冷間圧造用ステンレス鋼線には適用しない

Stainless steel wires

JIS G 4309:2013 不锈钢丝

This Standard specifies stainless steel wires that are produced using stainless steel wire rods and heat resisting steel wire rods containing 10.5

Stainless steel wires

BS EN ISO 6931-1:2020 弹簧用不锈钢 金属丝

Stainless steels for springs. Wire

GB/T 25863-2010 不锈钢烧结金属丝网多孔材料及其元件

本标准规定了不锈钢烧结金属丝网多孔材料及其元件的要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于将编制成形的不锈钢金属丝网多层复合后，采用轧制成形和真空烧结工艺制成的不锈钢烧结金属丝网多孔材料及其元件。 用其他材料制作的多孔材料及其元件产品，亦可参照执行

Stainless steel sintered metal mesh materials and components

ANSI/AWS A5.22/A5.22M:2012 不锈钢焊芯和金属芯焊丝和棒用规范

Classification and other requirements are specified for numerous grades of flux cored and metal cored stainless steel electrodes and rods

Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods

EN ISO 7046-2:2011 H型或Z型十字槽沉头螺钉(通用头型).产品等级A级.第2部分:8.8类属性钢螺钉,不锈钢螺丝及有色金属螺钉

This European Standard specifies a laboratory method to determine the leaching behaviour of substances from coatings into water over defined time

Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)

BULLETIN 460-2001 不锈钢药芯焊缝的高温开裂和性能及铋的作用: ）不锈钢药芯焊丝焊缝金属的高温性能研究

This Bulletin reports on activities of two important organizations concerned with welding and the performance of welded components. The Japan Welding

HIGH TEMPERATURE CRACKING AND PROPERTIES OF STAINLESS STEEL FLUX-CORED WELDS AND EFFECTS OF BISMUTH: )INVESTIGATION ON HIGH TEMPERATURE PROPERTIES OF WELD METALS OF STAINLESS STEEL FLUX-CORED WIRES AN

ASTM F2581-07 外科植入物用锻制氮增强的11锰-17铬-3钼低镍不锈钢合金棒材和金属丝的标准规范

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened

Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)

DIN EN ISO 7046-2:2011 H型或Z型十字槽沉头螺钉(通用头型).产品等级A级.第2部分:8.8类属性钢螺钉,不锈钢螺丝及有色金属螺钉(ISO 7046-2-2011).德文版 EN ISO 7046-2-2011

Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011); German version EN ISO 7046-2:2011

DVS 0941-3-2012 不锈钢和耐热钢金属电弧焊用实心焊丝

GB/T 4240-2019 不锈钢丝

本标准规定了不锈俩丝的术语和定义订货内容`分类与和号尺寸\外形、贰术要求试验方法`检验规则包装、标志和质量证明书。 本标准适用于不锈钢丝(以下简称钢丝)，但不包括冷项欠用和焊接用不锈钢丝,不包括奥氏体型和，沉淀硬化型的不锈弹筑钢丝

Stainless steel wires

GB/T 4240-2009 不锈钢丝

本标准规定了不锈钢丝的术语和定义、订货内容、分类与牌号、尺寸、外形及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本标准适用于不锈钢丝(以下简称钢丝)，但不包括奥氏体型和沉淀硬化型不锈弹簧钢丝、冷顶锻用和焊接用不锈钢丝

Stainless steel wires

KS D 3703-2007 不锈钢钢丝

이 규격은 스테인리스 강선 및 약 10.5 % 이상의 크롬을 포함하는 내열 강선(이하 선이

Stainless steel wires

GB/T 4240-1993 不锈钢丝

本标准规定了不锈钢丝分类、牌号、尺寸、外形、技术要求、试验方法、检验规则、包装、标志和质量证明书等。 本标准适用于不锈钢丝（以下简称钢丝），但不适用于弹簧、冷顶锻和焊接用不锈钢丝

Stainless steel wires

JIS G 4309:1994 不锈钢丝

Stainless steel wires

JIS G 4309:1999 不锈钢丝

この規格は，ステンレス鋼線及び約10.5%以上のクロムを含む耐熱鋼線似下，線という。)について規定する。ただし，ばね用ステンレス鋼線及び冷間圧造用ステンレス鋼線には適用しない

Stainless steel wires

JIS G 4309:2013 不锈钢丝

This Standard specifies stainless steel wires that are produced using stainless steel wire rods and heat resisting steel wire rods containing 10.5

Stainless steel wires