玻璃纤维增强热固性树脂承载型格栅检测

JC/T 1026-2007 玻璃纤维增强热固性树脂承载型格栅

本标准规定了玻璃纤维增强热固性树脂格栅（以下简称格栅）的构造、尺寸、产品型号和标记、技术条件、承载要求、检验规则和包装、标志、贮存及运输等。 本标准适用于石油化工、冶金、轻工、造船、能源、市政等行业的工业平台、地板、走道铺板，楼梯踏板、沟盖、围栏等承载用格栅，非承载用格栅可参照执行

Glass fiber reinforced thermosetting resin grating for supporting loads

ANSI/ASTM D3262:2016 玻璃纤维 (玻璃纤维增强型热固性树脂) 下水管道标准规格

Standard Specification for ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

ASTM D3262-16 玻璃纤维 (玻璃纤维增强型热固性树脂) 下水管道标准规格

1.1 This specification covers machine-made fiberglass

Standard Specification for &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

GB/T 26735-2011 玻璃纤维增强热固性树脂喷淋管

本标准规定了玻璃纤维增强热固性树脂喷淋管（以下简称喷淋管）的术语和定义、原材料、一般规定、技术要求、试验方法、检验规则、标志、包装、运输及贮存等。 本标准适用于公称直径为DN40mm～DN1400mm，以热固性树脂为基体材料，以玻璃纤维及其制品为增强材料，用于电厂或其他燃煤系统烟气湿式石灰石脱硫

Glass fiber reinfoced thermosetting resin spray pipe

ASME NM.2-2020 玻璃纤维增强热固性树脂系统

Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems

ASTM D3262-11 玻璃纤维(玻璃纤维增强热固树脂)污水管标准规格

1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), intended for use in gravity-flow

Standard Specification for x201C;Fiberglassx201D; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

ASTM D3517-19 “；玻璃纤维&x201d(玻璃纤维增强热固性树脂压力管

1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), intended for use in water conveyance systems

Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

ASTM D3517-11 玻璃纤维(玻璃纤维增强热固树脂)压力管的标准规格

1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), intended for use in water

Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

ASTM D3517-14 玻璃纤维(玻璃纤维增强热固树脂)压力管的标准规格

1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000

Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pressure Pipe

ASTM D4024-12 机制"纤维玻璃"(玻璃纤维增强的热固性树脂)法兰的标准规格

1.1 This specification covers reinforced-thermosetting resin flanges other than contact-molded flanges. Included are requirements

Standard Specification for Machine Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

ASTM D2996-17 长丝缠绕玻璃纤维(玻璃纤维增强热固性树脂)管的标准规格

1.1 This specification covers machine-made reinforced

Standard Specification for Filament-Wound &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ANSI/ASTM D3262:2011 玻璃纤维规范(玻璃纤维增强热固性树脂)污水管道

Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

ANSI/ASTM D2996:2001 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂)管用规范

This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up to 24 in.

Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe

ANSI/ASTM D2310:2006 机制玻璃纤维(玻璃纤维增强热固树脂)管规范

This classification covers machine-made "fiberglass" (glass-fiber-reinforced thermosetting-resin) pressure pipe. Methods of classification

Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ANSI/ASME NM.2-2020 玻璃纤维增强热固性树脂管道系统

Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems

JC/T 1026-2007 玻璃纤维增强热固性树脂承载型格栅

本标准规定了玻璃纤维增强热固性树脂格栅（以下简称格栅）的构造、尺寸、产品型号和标记、技术条件、承载要求、检验规则和包装、标志、贮存及运输等。 本标准适用于石油化工、冶金、轻工、造船、能源、市政等行业的工业平台、地板、走道铺板，楼梯踏板、沟盖、围栏等承载用格栅，非承载用格栅可参照执行

Glass fiber reinforced thermosetting resin grating for supporting loads

ANSI/ASTM D3262:2016 玻璃纤维 (玻璃纤维增强型热固性树脂) 下水管道标准规格

Standard Specification for ��Fiberglass�� (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

ASTM D3262-16 玻璃纤维 (玻璃纤维增强型热固性树脂) 下水管道标准规格

1.1 This specification covers machine-made fiberglass

Standard Specification for &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

GB/T 26735-2011 玻璃纤维增强热固性树脂喷淋管

本标准规定了玻璃纤维增强热固性树脂喷淋管（以下简称喷淋管）的术语和定义、原材料、一般规定、技术要求、试验方法、检验规则、标志、包装、运输及贮存等。 本标准适用于公称直径为DN40mm～DN1400mm，以热固性树脂为基体材料，以玻璃纤维及其制品为增强材料，用于电厂或其他燃煤系统烟气湿式石灰石脱硫

Glass fiber reinfoced thermosetting resin spray pipe

ASME NM.2-2020 玻璃纤维增强热固性树脂系统

Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems

ASTM D3262-11 玻璃纤维(玻璃纤维增强热固树脂)污水管标准规格

1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), intended for use in gravity-flow

Standard Specification for x201C;Fiberglassx201D; (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

ASTM D3517-19 “；玻璃纤维&x201d(玻璃纤维增强热固性树脂压力管

1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), intended for use in water conveyance systems

Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

ASTM D3517-11 玻璃纤维(玻璃纤维增强热固树脂)压力管的标准规格

1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), intended for use in water

Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

ASTM D3517-14 玻璃纤维(玻璃纤维增强热固树脂)压力管的标准规格

1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000

Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pressure Pipe

ASTM D4024-12 机制"纤维玻璃"(玻璃纤维增强的热固性树脂)法兰的标准规格

1.1 This specification covers reinforced-thermosetting resin flanges other than contact-molded flanges. Included are requirements

Standard Specification for Machine Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

ASTM D2996-17 长丝缠绕玻璃纤维(玻璃纤维增强热固性树脂)管的标准规格

1.1 This specification covers machine-made reinforced

Standard Specification for Filament-Wound &x201c;Fiberglass&x201d; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ANSI/ASTM D3262:2011 玻璃纤维规范(玻璃纤维增强热固性树脂)污水管道

Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

ANSI/ASTM D2996:2001 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂)管用规范

This specification covers machine-made reinforced thermosetting resin pressure pipe (RTRP) manufactured by the filament winding process up to 24 in.

Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe

ANSI/ASTM D2310:2006 机制玻璃纤维(玻璃纤维增强热固树脂)管规范

This classification covers machine-made "fiberglass" (glass-fiber-reinforced thermosetting-resin) pressure pipe. Methods of classification

Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

ANSI/ASME NM.2-2020 玻璃纤维增强热固性树脂管道系统

Glass-Fiber-Reinforced Thermosetting-Resin Piping Systems