GB/T 20221-2006 压埋地排污、排水用硬聚氯乙烯(PVC-U)管材
本标准规定了以聚氯乙烯树脂为主要原料、经挤出成型的压埋地排污、排水用硬聚氯乙烯（PVC-U）管材（以下简称“管材”）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从（110～1000）mm的弹性密封圈连接和外径从（110～200）mm的粘接式
Unplatsticized poly (Vinyl chloride)(PVC-U) pipes for non-pressure buried drainage and sewerage systems
BS EN 1401-1:1998 不承压地下雨水管和污水管用塑料管道系统.未增塑聚氯乙烯(PVC-U).管道、配件和系统规范
This part of EN 1401 specifies the requirements for pipes, fittings and the system of unplasticized poly(vinyl chloride) (PVC-U) piping systems
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Specifications for pipes, fittings and the system
GB/T 20221-2023 压埋地排污、排水用硬聚氯乙烯（PVC-U）管材
Pressureless buried sewage and drainage rigid polyvinyl chloride (PVC-U) pipes
DB13/T 950-2008 再生硬聚氯乙烯（PVC-U）压埋地排污、排水用管材
本标准参考GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》制定。 本标准与GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》主要技术变化 — 密度由≤1.55g/cm3，改为≤1.6g
Regenerated rigid polyvinyl chloride (PVC-U) non-pressure buried sewage and drainage pipes
BS EN 1401-1:2009 地下压力排水和排污用塑料管道系统.未增塑聚乙烯(氯乙烯)(PVC-U).管道,配件和系统规范
This Part of EN 1401 specifies the requirements for solid wall pipes, fittings and the system of unplasticized poly(vinyl chloride) (PVC-U) piping
Plastic piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system
BS EN ISO 1452-3:2010 供水和埋地、地上压排水及污水管道用塑料管道系统.未增塑聚乙烯(氯乙烯)(PVC-U).配件
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings
QB/T 2480-2000 建筑用硬聚氯乙烯（PVC-U）雨落水管材及管件
本标准规定了硬聚氯乙烯雨落水管材及管件的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以聚氯乙烯树脂为主要原料，加入适量的防老化剂及其它助剂，挤出成型的硬聚氯乙烯雨落水管材(以下简称“管材”)和注射成型的管件(以下简称“管件”)。 本标准适用于室外沿墙、柱敷设的
Rigid polyvinyl chloride (PVC-U) rainwater pipes and fittings for construction
GB/T 10002.3-1996 埋地排污、废水用硬聚氯乙烯（PVC-U）管材
本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的埋地排污、废水用硬聚氯乙烯管材（以下简称管材）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从110～630mm的弹性密封圈连接和外径从110～200mm的粘接式连接的埋地排污、废水用管材。在考虑
Unplasticized polyvinyl chloride (PVC-U) pipes for buried drainage and sewerage systems
BS EN ISO 1452-1:2009 供水和地下及地上压力排水和污水用塑料管道系统.未增塑聚氯乙烯(PVC U).总则
This part of ISO 1452 specifies the general aspects of unplasticized poly(vinyl chloride) (PVC-U) solid-wall piping systems intended for water supply
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC U) - General
ISO 1452-2:2009 供水、地下及地上压力排水和污水用塑料管道系统.未增塑聚乙烯(氯乙烯)(PVC-U).第2部分:管道
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes
QB/T 2480-2022 建筑用硬聚氯乙烯（PVC-U）雨落水管材及管件
Rigid polyvinyl chloride (PVC-U) rainwater pipes and fittings for construction
BS EN ISO 1452-1:2010 供水和地下及地上压力排水和污水用塑料管道系统 未增塑聚氯乙烯（PVC U） 总则
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U). General
ISO 1452-3:2009 供水和埋地、地上压排水及污水管道用塑料管道系统.未增塑聚乙烯(氯乙烯)(PVC-U).第3部分:配件
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
EN ISO 1452-3:2010 供水,地下及地上压力排水和污水用塑料管道系统.未增塑聚乙烯(氯乙烯)(PVC-U).第3部分:配件
This part of ISO 1452 specifies the characteristics of fittings made from unplasticized poly(vinyl chloride)(PVC-U) for piping systems intended
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009, corrected version 2010-03-01)
T/ZZB 2759-2022 高层建筑用硬聚氯乙烯（PVC-U）雨落水管材
本文件规定了高层建筑用硬聚氯乙烯（PVC-U）雨落水管材（以下简称管材）的术语和定义、产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于以聚氯乙烯（PVC）树脂为主要原料，加入铅稳定剂、抗老化剂等必要的助剂，经混配、挤出成型的圆形管材，
Unplasticized polyvinyl chloride (PVC-U) rainwater pipes for high rise buildings
GB/T 20221-2006 压埋地排污、排水用硬聚氯乙烯(PVC-U)管材
本标准规定了以聚氯乙烯树脂为主要原料、经挤出成型的压埋地排污、排水用硬聚氯乙烯（PVC-U）管材（以下简称“管材”）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从（110～1000）mm的弹性密封圈连接和外径从（110～200）mm的粘接式
Unplatsticized poly (Vinyl chloride)(PVC-U) pipes for non-pressure buried drainage and sewerage systems
BS EN 1401-1:1998 不承压地下雨水管和污水管用塑料管道系统.未增塑聚氯乙烯(PVC-U).管道、配件和系统规范
This part of EN 1401 specifies the requirements for pipes, fittings and the system of unplasticized poly(vinyl chloride) (PVC-U) piping systems
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinylchloride) (PVC-U) - Specifications for pipes, fittings and the system
GB/T 20221-2023 压埋地排污、排水用硬聚氯乙烯（PVC-U）管材
Pressureless buried sewage and drainage rigid polyvinyl chloride (PVC-U) pipes
DB13/T 950-2008 再生硬聚氯乙烯（PVC-U）压埋地排污、排水用管材
本标准参考GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》制定。 本标准与GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》主要技术变化 — 密度由≤1.55g/cm3，改为≤1.6g
Regenerated rigid polyvinyl chloride (PVC-U) non-pressure buried sewage and drainage pipes
BS EN 1401-1:2009 地下压力排水和排污用塑料管道系统.未增塑聚乙烯(氯乙烯)(PVC-U).管道,配件和系统规范
This Part of EN 1401 specifies the requirements for solid wall pipes, fittings and the system of unplasticized poly(vinyl chloride) (PVC-U) piping
Plastic piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system
BS EN ISO 1452-3:2010 供水和埋地、地上压排水及污水管道用塑料管道系统.未增塑聚乙烯(氯乙烯)(PVC-U).配件
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings
QB/T 2480-2000 建筑用硬聚氯乙烯（PVC-U）雨落水管材及管件
本标准规定了硬聚氯乙烯雨落水管材及管件的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以聚氯乙烯树脂为主要原料，加入适量的防老化剂及其它助剂，挤出成型的硬聚氯乙烯雨落水管材(以下简称“管材”)和注射成型的管件(以下简称“管件”)。 本标准适用于室外沿墙、柱敷设的
Rigid polyvinyl chloride (PVC-U) rainwater pipes and fittings for construction
GB/T 10002.3-1996 埋地排污、废水用硬聚氯乙烯（PVC-U）管材
本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的埋地排污、废水用硬聚氯乙烯管材（以下简称管材）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从110～630mm的弹性密封圈连接和外径从110～200mm的粘接式连接的埋地排污、废水用管材。在考虑
Unplasticized polyvinyl chloride (PVC-U) pipes for buried drainage and sewerage systems
BS EN ISO 1452-1:2009 供水和地下及地上压力排水和污水用塑料管道系统.未增塑聚氯乙烯(PVC U).总则
This part of ISO 1452 specifies the general aspects of unplasticized poly(vinyl chloride) (PVC-U) solid-wall piping systems intended for water supply
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC U) - General
ISO 1452-2:2009 供水、地下及地上压力排水和污水用塑料管道系统.未增塑聚乙烯(氯乙烯)(PVC-U).第2部分:管道
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes
QB/T 2480-2022 建筑用硬聚氯乙烯（PVC-U）雨落水管材及管件
Rigid polyvinyl chloride (PVC-U) rainwater pipes and fittings for construction
BS EN ISO 1452-1:2010 供水和地下及地上压力排水和污水用塑料管道系统 未增塑聚氯乙烯（PVC U） 总则
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U). General
ISO 1452-3:2009 供水和埋地、地上压排水及污水管道用塑料管道系统.未增塑聚乙烯(氯乙烯)(PVC-U).第3部分:配件
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
EN ISO 1452-3:2010 供水,地下及地上压力排水和污水用塑料管道系统.未增塑聚乙烯(氯乙烯)(PVC-U).第3部分:配件
This part of ISO 1452 specifies the characteristics of fittings made from unplasticized poly(vinyl chloride)(PVC-U) for piping systems intended
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009, corrected version 2010-03-01)
T/ZZB 2759-2022 高层建筑用硬聚氯乙烯（PVC-U）雨落水管材
本文件规定了高层建筑用硬聚氯乙烯（PVC-U）雨落水管材（以下简称管材）的术语和定义、产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于以聚氯乙烯（PVC）树脂为主要原料，加入铅稳定剂、抗老化剂等必要的助剂，经混配、挤出成型的圆形管材，
Unplasticized polyvinyl chloride (PVC-U) rainwater pipes for high rise buildings
编辑：北检院编辑部
