继电保护专用电力线载波收发信机检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

DL/T 524-1993 线技术条件

本标准规定了静态继电保护电力线载波专用收发信机的型式、额定参数、技术要求、试验方法及检验规则等。 本标准适用于110kV及以上中性点直接接地系统的继电保护专用收发信机,可作为这类产品研制、生产、检验和验收的依据

Specifications for special power line carrier transceivers for relay protection

DL/T 524-2002 线技术条件

本标准规定了继电保护专用电力线载波收发信机的型式、额定参数、技术要求、试验方法及檢驗規 则等。 本标准适用于 110kV 及以上中性点直接接地系统的继电保护专用电力线载波收发信机,可作为这 类产品研制、生产、检验和验收的依据

Specification for power line carrier transceiver dedicated to protection

JB/T 9571-1999 高频

  本标准规定了高频保护专用收发信机装置的分类原则、技术要求和检验方法。   本标准适用于高频保护专用收发信机装置,该类装置是用于发送和接收220~550kV架空输电线路上的继电保护高频信号,保证电力系统安全可靠运行

The power line carrier transceiver dedicated to protection

IEEE Std C93.5-2021 于传输离散远程号的线/接设备要求的 IEEE 标准

IEEE Standard for Requirements for Power Line Carrier Transmitter/ Receiver Equipment used to Transfer Discrete Teleprotection Signals

IEEE PC93.5-2021_Cor 1/D1, February 2022 于传输离散远程号的线/接设备的 IEEE 标准草案 勘误表 1

This corrigendum will add Table 3 which should have been included in the original but was removed erroneously during the balloting process. Note

IEEE Draft Standard for Power Line Carrier Transmitter/Receiver Equipment used to Transfer Discrete Teleprotection Signals - Corrigendum 1

NEMA C93.5-1997 单功能线/接设备的要求

Requirements for Single Function Power-Line Carrier Transmitter/Receiver Equipment

IEEE PC93.5/D7.5, May 2020 于传输离散远程号的线射器/接器设备的 IEEE 标准草案

Requirements for power line carrier (PLC) transmitter/receiver equipment used to transfer discrete teleprotection signals at power line carrier

IEEE Draft Standard for Power Line Carrier Transmitter/Receiver Equipment used to Transfer Discrete Teleprotection Signals

IEEE PC93.5/D7.6, November 2020 于传输离散远程号的线射器/接器设备的 IEEE 标准草案

Requirements for power line carrier (PLC) transmitter/receiver equipment used to transfer discrete teleprotection signals at power line carrier

IEEE Draft Standard for Power Line Carrier Transmitter/Receiver Equipment used to Transfer Discrete Teleprotection Signals

JB/T 56269-2000 高频 产品质量分等

High-frequency protection dedicated transceiver product quality classification

DL/T 1124-2009 数字线

本标准规定了数字电力线载波机主体部分的术语、定义、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于通过35kV及以上电压等级的电力线进行电话和数据传输的数字电力线载波机的主体部分,其示意图见图1

Digital power-line carrier terminals

DL/T 5177-2003 水.设计导则

Guide for design of relay protection in hydraulic power plants

SAE J2497-2012 商线

This SAE Recommended Practice defines a method for implementing a bidirectional@ serial communications link over the vehicle power supply line among

Power Line Carrier Communications for Commercial Vehicles

SAE J2497-2002 商线

This SAE Recommended Practice defines a method for implementing a bidirectional, serial communications link over the vehicle power supply line among

Power Line Carrier Communications for Commercial Vehicles

SAE J2497-2007 商线

This SAE Recommended Practice defines a method for implementing a bidirectional@ serial communications link over the vehicle power supply line among

Power Line Carrier Communications for Commercial Vehicles

GB/T 7255-1998 单边带线

本标准适用于通过高压电力线传输信息的单边带(SSB)电力线载波机(PLC)。 本标准的目的是规定单边带电力线载波机(图1)输入输出特性的建议值,并为理解这些建议给出定义说明。检验要求的各项试验应为国际电工词汇定义的型式试验(IEV 151-04-15)。 本标准为两种不同应用方式

Single sideband power-line carrier terminals

DL/T 524-1993 线技术条件

本标准规定了静态继电保护电力线载波专用收发信机的型式、额定参数、技术要求、试验方法及检验规则等。 本标准适用于110kV及以上中性点直接接地系统的继电保护专用收发信机,可作为这类产品研制、生产、检验和验收的依据

Specifications for special power line carrier transceivers for relay protection

DL/T 524-2002 线技术条件

本标准规定了继电保护专用电力线载波收发信机的型式、额定参数、技术要求、试验方法及檢驗規 则等。 本标准适用于 110kV 及以上中性点直接接地系统的继电保护专用电力线载波收发信机,可作为这 类产品研制、生产、检验和验收的依据

Specification for power line carrier transceiver dedicated to protection

JB/T 9571-1999 高频

  本标准规定了高频保护专用收发信机装置的分类原则、技术要求和检验方法。   本标准适用于高频保护专用收发信机装置,该类装置是用于发送和接收220~550kV架空输电线路上的继电保护高频信号,保证电力系统安全可靠运行

The power line carrier transceiver dedicated to protection

IEEE Std C93.5-2021 于传输离散远程号的线/接设备要求的 IEEE 标准

IEEE Standard for Requirements for Power Line Carrier Transmitter/ Receiver Equipment used to Transfer Discrete Teleprotection Signals

IEEE PC93.5-2021_Cor 1/D1, February 2022 于传输离散远程号的线/接设备的 IEEE 标准草案 勘误表 1

This corrigendum will add Table 3 which should have been included in the original but was removed erroneously during the balloting process. Note

IEEE Draft Standard for Power Line Carrier Transmitter/Receiver Equipment used to Transfer Discrete Teleprotection Signals - Corrigendum 1

NEMA C93.5-1997 单功能线/接设备的要求

Requirements for Single Function Power-Line Carrier Transmitter/Receiver Equipment

IEEE PC93.5/D7.5, May 2020 于传输离散远程号的线射器/接器设备的 IEEE 标准草案

Requirements for power line carrier (PLC) transmitter/receiver equipment used to transfer discrete teleprotection signals at power line carrier

IEEE Draft Standard for Power Line Carrier Transmitter/Receiver Equipment used to Transfer Discrete Teleprotection Signals

IEEE PC93.5/D7.6, November 2020 于传输离散远程号的线射器/接器设备的 IEEE 标准草案

Requirements for power line carrier (PLC) transmitter/receiver equipment used to transfer discrete teleprotection signals at power line carrier

IEEE Draft Standard for Power Line Carrier Transmitter/Receiver Equipment used to Transfer Discrete Teleprotection Signals

JB/T 56269-2000 高频 产品质量分等

High-frequency protection dedicated transceiver product quality classification

DL/T 1124-2009 数字线

本标准规定了数字电力线载波机主体部分的术语、定义、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于通过35kV及以上电压等级的电力线进行电话和数据传输的数字电力线载波机的主体部分,其示意图见图1

Digital power-line carrier terminals

DL/T 5177-2003 水.设计导则

Guide for design of relay protection in hydraulic power plants

SAE J2497-2012 商线

This SAE Recommended Practice defines a method for implementing a bidirectional@ serial communications link over the vehicle power supply line among

Power Line Carrier Communications for Commercial Vehicles

SAE J2497-2002 商线

This SAE Recommended Practice defines a method for implementing a bidirectional, serial communications link over the vehicle power supply line among

Power Line Carrier Communications for Commercial Vehicles

SAE J2497-2007 商线

This SAE Recommended Practice defines a method for implementing a bidirectional@ serial communications link over the vehicle power supply line among

Power Line Carrier Communications for Commercial Vehicles

GB/T 7255-1998 单边带线

本标准适用于通过高压电力线传输信息的单边带(SSB)电力线载波机(PLC)。 本标准的目的是规定单边带电力线载波机(图1)输入输出特性的建议值,并为理解这些建议给出定义说明。检验要求的各项试验应为国际电工词汇定义的型式试验(IEV 151-04-15)。 本标准为两种不同应用方式

Single sideband power-line carrier terminals

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。