GB/T 35480-2017 紧固件 螺栓、螺钉和螺柱预涂微胶囊型粘合层技术条件
Fastener—Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification
GB/T 35478-2017 紧固件 螺栓、螺钉和螺柱预涂聚酰胺锁紧层技术条件
Fastener—Steel bolts,screws and studs with polyamide locking pre-coating technical specification
DIN 65430:2002 航空航天.埋头紧固件用壁厚为0.25mm的套筒
Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with countersunk head
DIN 65431:2002 航空航天.埋头紧固件用壁厚为0.5mm的套筒
Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with countersunk head
T/CSCS 11-2021 螺栓球节点用八角型高强度螺栓和套筒
本标准主要内容包括：1. 范围；2. 规范性引用文件；3. 术语和定义；4. 型式与尺寸； 5. 技术条件和引用标准；6. 标记；7. 机械性能； 8. 试验方法；9. 验收规则；
Octagonal High Strength Bolts and Sockets for Bolt Ball Joints
GOST 16018-1979 铁路轨道紧固螺栓和预埋螺栓用螺母.设计和尺寸规格.技术要求
Nuts for clamp and inserted bolts of rail track fastenings. Design and dimensions. Technical requirements
MT/T 187.10-1996 刮板输送机紧固件.E型螺栓
本标准规定了E型螺栓的形式、参数和技术要求。 本标准适用于煤矿井下中心双链刮板输送机和中心双链刮板转载机采用的E型螺栓(以下简称螺栓
Fasteners of scraper conveyors E type bolts
SAE J193-1996 球头螺栓及套筒配件.测试规程
The test procedures describe a method to laboratory test suspension and steering system ball stud and/or socket assemblies for functional
Ball Stud and Socket Assembly - Test Procedures
AIA/NAS NAS 1754-1991 1/64自锁可扎及非可扎埋头轻型外轴套内螺纹空心紧固件
ALL DIAMETERS TO BE CONCENTRIC WITHIN .005 TIR
Fastener - Blind, Internally Threaded, External Sleeve Lightweight, Flush Head, Millable& Non-Millable, Self-Locking, 1/64" Oversize (Rev. 3)
JB/T 1709-1991 T型螺栓
本标准规定了T型螺栓的结构型式、尺寸和技术要求
T-bolt
CSN EN 20898-1-1995 紧固器．紧固件的机械性能．第1部分：螺栓；螺钉及柱头螺栓
Zpracovatel: Ekodo Zlín, I?O 14638959, Ing. Josef Staněk Technická normaliza?ní komise: TNK 9 Spojovací sou?ásti Pracovník ?eského normaliza?ního
Fasteners.Mechanical properties of fasteners.Part 1:Bolts,screws and studs
ONORM EN 20898-1-1991 紧固件的机械性能．螺栓、螺钉及柱头螺栓
Mechanical properties of fasteners -Bolts, screws and studs
ONORM ISO 898 Teil.1:1989 紧固件的机械性能．螺栓；螺钉及柱头螺栓
Mechanical properties offasteners; bolts, screws and studs
DIN 7349:2009-08 用于带有重型夹紧套筒的螺栓的平垫圈
Plain washers for bolts with heavy clamping sleeves
GB/T 5276-2015 紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注
本标准规定了螺栓、螺钉、螺柱及螺母标注尺寸采用的代号、内容及标注方法。 本标准适用于螺栓、螺钉、螺柱及螺母的图样标注
Fasteners.Bolts, screws, studs and nuts.Symbols and descriptions of dimensions
GB/T 35480-2017 紧固件 螺栓、螺钉和螺柱预涂微胶囊型粘合层技术条件
Fastener—Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification
GB/T 35478-2017 紧固件 螺栓、螺钉和螺柱预涂聚酰胺锁紧层技术条件
Fastener—Steel bolts,screws and studs with polyamide locking pre-coating technical specification
DIN 65430:2002 航空航天.埋头紧固件用壁厚为0.25mm的套筒
Aerospace - Sleeves, wall thickness 0,25 mm, for fasteners with countersunk head
DIN 65431:2002 航空航天.埋头紧固件用壁厚为0.5mm的套筒
Aerospace - Sleeves, wall thickness 0,5 mm, for fasteners with countersunk head
T/CSCS 11-2021 螺栓球节点用八角型高强度螺栓和套筒
本标准主要内容包括：1. 范围；2. 规范性引用文件；3. 术语和定义；4. 型式与尺寸； 5. 技术条件和引用标准；6. 标记；7. 机械性能； 8. 试验方法；9. 验收规则；
Octagonal High Strength Bolts and Sockets for Bolt Ball Joints
GOST 16018-1979 铁路轨道紧固螺栓和预埋螺栓用螺母.设计和尺寸规格.技术要求
Nuts for clamp and inserted bolts of rail track fastenings. Design and dimensions. Technical requirements
MT/T 187.10-1996 刮板输送机紧固件.E型螺栓
本标准规定了E型螺栓的形式、参数和技术要求。 本标准适用于煤矿井下中心双链刮板输送机和中心双链刮板转载机采用的E型螺栓(以下简称螺栓
Fasteners of scraper conveyors E type bolts
SAE J193-1996 球头螺栓及套筒配件.测试规程
The test procedures describe a method to laboratory test suspension and steering system ball stud and/or socket assemblies for functional
Ball Stud and Socket Assembly - Test Procedures
AIA/NAS NAS 1754-1991 1/64自锁可扎及非可扎埋头轻型外轴套内螺纹空心紧固件
ALL DIAMETERS TO BE CONCENTRIC WITHIN .005 TIR
Fastener - Blind, Internally Threaded, External Sleeve Lightweight, Flush Head, Millable& Non-Millable, Self-Locking, 1/64" Oversize (Rev. 3)
JB/T 1709-1991 T型螺栓
本标准规定了T型螺栓的结构型式、尺寸和技术要求
T-bolt
CSN EN 20898-1-1995 紧固器．紧固件的机械性能．第1部分：螺栓；螺钉及柱头螺栓
Zpracovatel: Ekodo Zlín, I?O 14638959, Ing. Josef Staněk Technická normaliza?ní komise: TNK 9 Spojovací sou?ásti Pracovník ?eského normaliza?ního
Fasteners.Mechanical properties of fasteners.Part 1:Bolts,screws and studs
ONORM EN 20898-1-1991 紧固件的机械性能．螺栓、螺钉及柱头螺栓
Mechanical properties of fasteners -Bolts, screws and studs
ONORM ISO 898 Teil.1:1989 紧固件的机械性能．螺栓；螺钉及柱头螺栓
Mechanical properties offasteners; bolts, screws and studs
DIN 7349:2009-08 用于带有重型夹紧套筒的螺栓的平垫圈
Plain washers for bolts with heavy clamping sleeves
GB/T 5276-2015 紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注
本标准规定了螺栓、螺钉、螺柱及螺母标注尺寸采用的代号、内容及标注方法。 本标准适用于螺栓、螺钉、螺柱及螺母的图样标注
Fasteners.Bolts, screws, studs and nuts.Symbols and descriptions of dimensions
编辑：北检院编辑部
