QB/T 4041-2010 聚四氟乙烯棒材
本标准规定了聚四氟乙烯棒材（以下简称“棒材”）的型号规格、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于加工各种腐蚀介质中工作的衬垫、密封件和润滑材料以及在各种频率下使用的电绝缘零件等的未加填充的聚四氟乙烯树脂（可含再生聚四氟乙烯树脂）经模压、糊膏挤出或柱塞挤出工艺成型的棒材
Polytetrafluoroethylene rod
QB/T 3626-1999 聚四氟乙烯棒材
本标准适用于糊膏挤压法或模压法成型的聚四氟乙烯棒材。 棒材用作各种腐蚀性介质中工作的衬垫、密封件和润滑材料以及在各种频率下使用的电绝缘零件
Polytetrafluoroethylene rod
JIS K 6889:1995 聚四氟乙烯棒材
Polytetrafluoroethylene rods
GJB 3025A-2019 聚四氟乙烯棒材规范
Specification for polytetrafluoroethylene rods
GJB 3025-1997 聚四氟乙烯棒材规范
Specification for polytetrafluoroethylene rods
GJB 8279-2014 聚苯酯填充聚四氟乙烯棒材规范
本规范规定了聚苯酯填充聚四氟乙烯棒材的要求。本规范适用于采用悬浮聚四氟乙烯树脂与20%聚苯酯及改性添加剂经预处理、配比、混合、模压烧结、后处理制作的聚苯酯填充聚四氟乙烯棒材(以下简称棒材
Specification for PTFE bar filled with poly (phenyl p-hydroxybenzoate)
SAE AMS3656-1960 聚四氟乙烯棒材和管材，挤压 TFE 氟碳树脂烧结
POLYTETRAFLUOROETHYLENE RODS AND TUBES, EXTRUDED TFE Fluorocarbon Resin As Sintered
AS 1198:1973 聚四氟乙烯挤压棒材和管件
Classifies two grades of rod and tube according to quality and four classes according to dimensional stability and internal finish. Physical
Polytetrafluoroethylene (PTFE) extruded rod and tube
SAE AMS3670/3B-2004 12%石墨3%聚四氟乙烯填充的聚酰亚胺-亚胺棒材、杆材和型材
This specification covers a polyamide-imide plastic filled with graphite and polytetrafluoroethylene (PTFE) in the form of molded or extruded bar, rod
Polyamide-Imide Bar, Rod, and Shapes, 12% Graphite - 3% Polytetrafluoroethylene Filled
SAE AMS3670/2B-1992 20石墨-3聚四氟乙烯填充的聚酰胺-酰亚胺棒材、杆材和型材
This specification covers a polyamide-imide plastic filled with graphite and polytetrafluoroethylene (PTFE) in the form of molded bar, rod
Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled
SAE AMS3670/3B-1995 12%石墨3%聚四氟乙烯填充的聚酰亚胺-亚胺棒材、杆材和型材
This specification covers a polyamide-imide plastic filled with graphite and polytetrafluoroethylene (PTFE) in the form of molded or extruded bar, rod
Polyamide-Imide Bar, Rod, and Shapes 12% Graphite - 3% Polytetrafluoroethylene Filled
SAE AMS3670/2B-2006 20石墨-3聚四氟乙烯填充的聚酰胺-酰亚胺棒材、杆材和型材
Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled
QB/T 3624-1999 聚四氟乙烯管材
本标准适用于糊膏挤压法成型的聚四氟乙烯管材，可作为绝缘及输送流体等导管
Polytetrafluoroethylene tube
QB/T 3625-1999 聚四氟乙烯板材
本标准适用于模压法成型的聚四氟乙烯板材或将模压法、液压法成型的毛坯再经车削或滚压加工而制得的板材
Polytetrafluoroethylene plate
QB/T 4877-2015 聚四氟乙烯管材
本标准规定了聚四氟乙烯管材(以下简称“PTFE管材”)的型号规格、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于采用未加填料的聚四氟乙烯分散或悬浮树脂(含聚四氟乙烯再生树脂)加工而成的管材
Polytetrafluoroethylene tube
QB/T 4041-2010 聚四氟乙烯棒材
本标准规定了聚四氟乙烯棒材（以下简称“棒材”）的型号规格、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于加工各种腐蚀介质中工作的衬垫、密封件和润滑材料以及在各种频率下使用的电绝缘零件等的未加填充的聚四氟乙烯树脂（可含再生聚四氟乙烯树脂）经模压、糊膏挤出或柱塞挤出工艺成型的棒材
Polytetrafluoroethylene rod
QB/T 3626-1999 聚四氟乙烯棒材
本标准适用于糊膏挤压法或模压法成型的聚四氟乙烯棒材。 棒材用作各种腐蚀性介质中工作的衬垫、密封件和润滑材料以及在各种频率下使用的电绝缘零件
Polytetrafluoroethylene rod
JIS K 6889:1995 聚四氟乙烯棒材
Polytetrafluoroethylene rods
GJB 3025A-2019 聚四氟乙烯棒材规范
Specification for polytetrafluoroethylene rods
GJB 3025-1997 聚四氟乙烯棒材规范
Specification for polytetrafluoroethylene rods
GJB 8279-2014 聚苯酯填充聚四氟乙烯棒材规范
本规范规定了聚苯酯填充聚四氟乙烯棒材的要求。本规范适用于采用悬浮聚四氟乙烯树脂与20%聚苯酯及改性添加剂经预处理、配比、混合、模压烧结、后处理制作的聚苯酯填充聚四氟乙烯棒材(以下简称棒材
Specification for PTFE bar filled with poly (phenyl p-hydroxybenzoate)
SAE AMS3656-1960 聚四氟乙烯棒材和管材，挤压 TFE 氟碳树脂烧结
POLYTETRAFLUOROETHYLENE RODS AND TUBES, EXTRUDED TFE Fluorocarbon Resin As Sintered
AS 1198:1973 聚四氟乙烯挤压棒材和管件
Classifies two grades of rod and tube according to quality and four classes according to dimensional stability and internal finish. Physical
Polytetrafluoroethylene (PTFE) extruded rod and tube
SAE AMS3670/3B-2004 12%石墨3%聚四氟乙烯填充的聚酰亚胺-亚胺棒材、杆材和型材
This specification covers a polyamide-imide plastic filled with graphite and polytetrafluoroethylene (PTFE) in the form of molded or extruded bar, rod
Polyamide-Imide Bar, Rod, and Shapes, 12% Graphite - 3% Polytetrafluoroethylene Filled
SAE AMS3670/2B-1992 20石墨-3聚四氟乙烯填充的聚酰胺-酰亚胺棒材、杆材和型材
This specification covers a polyamide-imide plastic filled with graphite and polytetrafluoroethylene (PTFE) in the form of molded bar, rod
Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled
SAE AMS3670/3B-1995 12%石墨3%聚四氟乙烯填充的聚酰亚胺-亚胺棒材、杆材和型材
This specification covers a polyamide-imide plastic filled with graphite and polytetrafluoroethylene (PTFE) in the form of molded or extruded bar, rod
Polyamide-Imide Bar, Rod, and Shapes 12% Graphite - 3% Polytetrafluoroethylene Filled
SAE AMS3670/2B-2006 20石墨-3聚四氟乙烯填充的聚酰胺-酰亚胺棒材、杆材和型材
Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled
QB/T 3624-1999 聚四氟乙烯管材
本标准适用于糊膏挤压法成型的聚四氟乙烯管材，可作为绝缘及输送流体等导管
Polytetrafluoroethylene tube
QB/T 3625-1999 聚四氟乙烯板材
本标准适用于模压法成型的聚四氟乙烯板材或将模压法、液压法成型的毛坯再经车削或滚压加工而制得的板材
Polytetrafluoroethylene plate
QB/T 4877-2015 聚四氟乙烯管材
本标准规定了聚四氟乙烯管材(以下简称“PTFE管材”)的型号规格、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于采用未加填料的聚四氟乙烯分散或悬浮树脂(含聚四氟乙烯再生树脂)加工而成的管材
Polytetrafluoroethylene tube
编辑：北检院编辑部
