玻璃表面疏水污染物检测检测

GB/T 24368-2009 玻璃表面疏水污染物检测.接触角测量法

警告：本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关规定条件。 本标准规定了通过测量接触角来检测玻璃表面的疏水污染物的意义、应用、影响因素、试验装置、试剂和材料、试验步骤、结果解释等。 本标准适用于通过测量接触角来检测玻璃表面的疏水污染物

Test method for hydrophobic contamination on glass by contact angle measurement

ASTM C813-90(2014 使用接触角测量法对玻璃表面疏水污染物进行检测的标准试验方法

5.1 The contact angle test is nondestructive and may

Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

ASTM C813-90(1999 用接触角测量法测定玻璃表面疏水污染物量的标准试验方法

1.1 This test method covers the detection of hydrophobic contamination on glass surfaces by means of contact angle measurements. When properly

Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

ASTM C813-90(2004 用接触角测量法测定玻璃表面上疏水污物量的标准试验方法

The contact angle test is nondestructive and may be used for control and evaluation of processes for the removal of hydrophobic

Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

ASTM C813-90(2009 用接触角测量法测定玻璃表面上疏水污物量的标准试验方法

The contact angle test is nondestructive and may be used for control and evaluation of processes for the removal of hydrophobic contaminants

Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

IPC TM-650 2.3.38B-1997 表面有机污染物检测试验

Surface Organic Contaminant Detection Test

IPC TM-650 2.3.38C-2004 表面有机污染物检测试验

This test method is for use in determining if organic@ nonionic contaminants are present on bare printed wiring board@ and completed assembly surfaces

Surface Organic Contaminant Detection Test

ASTM C813-20 通过接触角测量在玻璃上的疏水污染的标准测试方法

1.1 This test method covers the detection of hydrophobic contamination on glass surfaces by means of contact angle measurements. When properly

Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

IPC TM-650 2.3.26A-1994 表面污染物的电离检测（动态法）

Purpose This test method establishes a procedure for determining the amount of surface ionic soil on a printed board or printed board assembly

Ionizable Detection of Surface Contaminants (Dynamic Method)

IPC TM-650 2.3.25B-1997 可电离表面污染物的检测和测量

Detection and Measurement of Ionizable Surface Contaminants

IPC TM-650 2.3.38A-1988 表面有机污染物检测测试（内部方法）

Surface Organic Contaminant Detection Test (in-House Method)

SIS 13 63 22-1970 玻璃．玻璃表面抗水解性测定

Glass. Determination of the hydrolytic resistance of glass surfaces

MSZ MI 19391/2-1980 表面辐射型污染的检验，氚得污染测量

GB/T 15222-1994 表面污染测定 第2部分 氚表面污染

本标准规定了氚表面污染的测定方法和程序。 本标准适用于设备、设施、放射性物质容器和密封源表面的氚表面污染测定。 本标准不适用于皮肤和工作服氚表面污染的测定

Evaluation of surface contamination--Part 2:Tritium surface cantamination

GB/T 14056.2-2011 表面污染测定.第2部分：氚表面污染

本部分规定了氘表面污染的测定方法和程序。 本部分适用于设备、设施、放射性物质容器和密封源表面的氘表面污染测定”本部分不适用于皮肤和工作服氘表面污染的测定

Evaluation of surface contamination.Part 2: Tritium surface contamination

GB/T 24368-2009 玻璃表面疏水污染物检测.接触角测量法

警告：本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关规定条件。 本标准规定了通过测量接触角来检测玻璃表面的疏水污染物的意义、应用、影响因素、试验装置、试剂和材料、试验步骤、结果解释等。 本标准适用于通过测量接触角来检测玻璃表面的疏水污染物

Test method for hydrophobic contamination on glass by contact angle measurement

ASTM C813-90(2014 使用接触角测量法对玻璃表面疏水污染物进行检测的标准试验方法

5.1 The contact angle test is nondestructive and may

Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

ASTM C813-90(1999 用接触角测量法测定玻璃表面疏水污染物量的标准试验方法

1.1 This test method covers the detection of hydrophobic contamination on glass surfaces by means of contact angle measurements. When properly

Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

ASTM C813-90(2004 用接触角测量法测定玻璃表面上疏水污物量的标准试验方法

The contact angle test is nondestructive and may be used for control and evaluation of processes for the removal of hydrophobic

Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

ASTM C813-90(2009 用接触角测量法测定玻璃表面上疏水污物量的标准试验方法

The contact angle test is nondestructive and may be used for control and evaluation of processes for the removal of hydrophobic contaminants

Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

IPC TM-650 2.3.38B-1997 表面有机污染物检测试验

Surface Organic Contaminant Detection Test

IPC TM-650 2.3.38C-2004 表面有机污染物检测试验

This test method is for use in determining if organic@ nonionic contaminants are present on bare printed wiring board@ and completed assembly surfaces

Surface Organic Contaminant Detection Test

ASTM C813-20 通过接触角测量在玻璃上的疏水污染的标准测试方法

1.1 This test method covers the detection of hydrophobic contamination on glass surfaces by means of contact angle measurements. When properly

Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

IPC TM-650 2.3.26A-1994 表面污染物的电离检测（动态法）

Purpose This test method establishes a procedure for determining the amount of surface ionic soil on a printed board or printed board assembly

Ionizable Detection of Surface Contaminants (Dynamic Method)

IPC TM-650 2.3.25B-1997 可电离表面污染物的检测和测量

Detection and Measurement of Ionizable Surface Contaminants

IPC TM-650 2.3.38A-1988 表面有机污染物检测测试（内部方法）

Surface Organic Contaminant Detection Test (in-House Method)

SIS 13 63 22-1970 玻璃．玻璃表面抗水解性测定

Glass. Determination of the hydrolytic resistance of glass surfaces

MSZ MI 19391/2-1980 表面辐射型污染的检验，氚得污染测量

GB/T 15222-1994 表面污染测定 第2部分 氚表面污染

本标准规定了氚表面污染的测定方法和程序。 本标准适用于设备、设施、放射性物质容器和密封源表面的氚表面污染测定。 本标准不适用于皮肤和工作服氚表面污染的测定

Evaluation of surface contamination--Part 2:Tritium surface cantamination

GB/T 14056.2-2011 表面污染测定.第2部分：氚表面污染

本部分规定了氘表面污染的测定方法和程序。 本部分适用于设备、设施、放射性物质容器和密封源表面的氘表面污染测定”本部分不适用于皮肤和工作服氘表面污染的测定

Evaluation of surface contamination.Part 2: Tritium surface contamination