QB/T 3625-1999 聚四氟乙烯板材
本标准适用于模压法成型的聚四氟乙烯板材或将模压法、液压法成型的毛坯再经车削或滚压加工而制得的板材
Polytetrafluoroethylene plate
GJB 8280-2014 聚苯酯填充聚四氟乙烯板材规范
本规范规定了聚苯酯填充聚四氟乙烯板材的要求。本规范适用于采用悬浮聚四氟乙烯树脂与20%聚苯酯及改性添加剂经预处理、配比、混合、模压、烧结、后处理制作的聚苯酯填充聚四氟乙烯板材(以下简称板材)。板材中包括模压板和管材经车削制作的车削板
Specification for PTFE plate filled with poly (phenyl p-hydroxybenzoate)
SAE AMS3669A-1976 聚四氟乙烯板材，模压优质级，烧结后
This specification covers one grade of polytetrafluoroethylene resin in the form of molded sheet
POLYTETRAFLUOROETHYLENE SHEET, MOLDED Premium Grade, As Sintered
SAE AMS3669-1969 聚四氟乙烯板材，模压优质级，烧结后
POLYTETRAFLUOROETHYLENE SHEET, MOLDED Premium Grade, As Sintered
SAE AMS3669B-1984 聚四氟乙烯板材，模压优质级，烧结后
This specification covers one grade of polytetrafluoroethylene resin in the form of molded sheet
POLYTETRAFLUOROETHYLENE SHEET, MOLDED Premium Grade, As Sintered
SAE AMS3669C-1991 聚四氟乙烯板材，模压优质级，烧结后
This specification covers one grade of polytetrafluoroethylene resin in the form of molded sheet
POLYTETRAFLUOROETHYLENE SHEET, MOLDED Premium Grade, As Sintered
SAE AMS3669D-1998 聚四氟乙烯板材，模压优质级，烧结后
This specification covers virgin, unfilled polytetrafluoroethylene resin in the form of sheet, manufactured by compression molding and sintering
Polytetrafluoroethylene Sheet, Molded Premium Grade, As Sintered
SAE AMS3667B-2011 聚四氟乙烯板材，模压通用级，烧结状态
This specification covers one grade of polytetrafluoroethylene resin in the form of molded sheet
POLYTETRAFLUOROETHYLENE SHEET, MOLDED General Purpose Grade, As Sintered
SAE AMS3667C-1998 聚四氟乙烯板材，模压通用级，烧结状态
This specification covers virgin, unfilled polytetrafluoroethylene resin in the form of sheet, manufactured by compression molding and sintering
Polytetrafluoroethylene Sheet, Molded General Purpose Grade, As Sintered
SAE AMS3667A-1976 聚四氟乙烯板材，模压通用级，烧结状态
This specification covers one grade of polytetrafluoroethylene resin in the form of molded sheet
POLYTETRAFLUOROETHYLENE SHEET, MOLDED General Purpose Grade, As Sintered
SAE AMS3667-1966 聚四氟乙烯板材，模压通用级，烧结状态
POLYTETRAFLUOROETHYLENE SHEET, MOLDED General Purpose Grade, As Sintered
SAE AMS3842-1961 聚四氟乙烯板材 TFE 氟碳树脂，石棉纤维增强
POLYTETRAFLUOROETHYLENE SHEET TFE Fluorocarbon Resin, Asbestos Fiber Reinforced
JIS K 6888:1995 聚四氟乙烯薄板材
Polytetrafluoroethylene sheets
QB/T 5257-2018 聚四氟乙烯（PTFE）板材
本标准规定了聚四氟乙烯（PTFE）板材的分类和标识、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于以聚四氟乙烯悬浮树脂为主要原料，采用模压法成型的板材或模压法、等压法制成的毛坯，经车削加工制得的板材
Polytetrafluoroethylene (PTFE) sheet
SAE AMS3666D-1998 聚四氟乙烯（PTFE）板材，玻璃布增强
This specification covers a glass-cloth-reinforced polytetrafluoroethylene (PTFE) resin in the form of sheet
Polytetrafluoroethylene (PTFE) Sheet, Glass Cloth Reinforced
QB/T 3625-1999 聚四氟乙烯板材
本标准适用于模压法成型的聚四氟乙烯板材或将模压法、液压法成型的毛坯再经车削或滚压加工而制得的板材
Polytetrafluoroethylene plate
GJB 8280-2014 聚苯酯填充聚四氟乙烯板材规范
本规范规定了聚苯酯填充聚四氟乙烯板材的要求。本规范适用于采用悬浮聚四氟乙烯树脂与20%聚苯酯及改性添加剂经预处理、配比、混合、模压、烧结、后处理制作的聚苯酯填充聚四氟乙烯板材(以下简称板材)。板材中包括模压板和管材经车削制作的车削板
Specification for PTFE plate filled with poly (phenyl p-hydroxybenzoate)
SAE AMS3669A-1976 聚四氟乙烯板材，模压优质级，烧结后
This specification covers one grade of polytetrafluoroethylene resin in the form of molded sheet
POLYTETRAFLUOROETHYLENE SHEET, MOLDED Premium Grade, As Sintered
SAE AMS3669-1969 聚四氟乙烯板材，模压优质级，烧结后
POLYTETRAFLUOROETHYLENE SHEET, MOLDED Premium Grade, As Sintered
SAE AMS3669B-1984 聚四氟乙烯板材，模压优质级，烧结后
This specification covers one grade of polytetrafluoroethylene resin in the form of molded sheet
POLYTETRAFLUOROETHYLENE SHEET, MOLDED Premium Grade, As Sintered
SAE AMS3669C-1991 聚四氟乙烯板材，模压优质级，烧结后
This specification covers one grade of polytetrafluoroethylene resin in the form of molded sheet
POLYTETRAFLUOROETHYLENE SHEET, MOLDED Premium Grade, As Sintered
SAE AMS3669D-1998 聚四氟乙烯板材，模压优质级，烧结后
This specification covers virgin, unfilled polytetrafluoroethylene resin in the form of sheet, manufactured by compression molding and sintering
Polytetrafluoroethylene Sheet, Molded Premium Grade, As Sintered
SAE AMS3667B-2011 聚四氟乙烯板材，模压通用级，烧结状态
This specification covers one grade of polytetrafluoroethylene resin in the form of molded sheet
POLYTETRAFLUOROETHYLENE SHEET, MOLDED General Purpose Grade, As Sintered
SAE AMS3667C-1998 聚四氟乙烯板材，模压通用级，烧结状态
This specification covers virgin, unfilled polytetrafluoroethylene resin in the form of sheet, manufactured by compression molding and sintering
Polytetrafluoroethylene Sheet, Molded General Purpose Grade, As Sintered
SAE AMS3667A-1976 聚四氟乙烯板材，模压通用级，烧结状态
This specification covers one grade of polytetrafluoroethylene resin in the form of molded sheet
POLYTETRAFLUOROETHYLENE SHEET, MOLDED General Purpose Grade, As Sintered
SAE AMS3667-1966 聚四氟乙烯板材，模压通用级，烧结状态
POLYTETRAFLUOROETHYLENE SHEET, MOLDED General Purpose Grade, As Sintered
SAE AMS3842-1961 聚四氟乙烯板材 TFE 氟碳树脂，石棉纤维增强
POLYTETRAFLUOROETHYLENE SHEET TFE Fluorocarbon Resin, Asbestos Fiber Reinforced
JIS K 6888:1995 聚四氟乙烯薄板材
Polytetrafluoroethylene sheets
QB/T 5257-2018 聚四氟乙烯（PTFE）板材
本标准规定了聚四氟乙烯（PTFE）板材的分类和标识、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于以聚四氟乙烯悬浮树脂为主要原料，采用模压法成型的板材或模压法、等压法制成的毛坯，经车削加工制得的板材
Polytetrafluoroethylene (PTFE) sheet
SAE AMS3666D-1998 聚四氟乙烯（PTFE）板材，玻璃布增强
This specification covers a glass-cloth-reinforced polytetrafluoroethylene (PTFE) resin in the form of sheet
Polytetrafluoroethylene (PTFE) Sheet, Glass Cloth Reinforced
编辑：北检院编辑部
