BS 3173:1996 床垫用弹簧组合件规范
This British Standard specifies requirements for open coil and pocketed mattress spring units used for the construction of spring interior mattresses
Specification for spring units for mattresses
GB/T 9074.15-1988 六角头螺栓和弹簧垫圈组合件
本标准规定了螺纹规格为M3～M12的六角头螺栓和弹簧垫圈组合件
Hexagon head bolt and single coil spring lock washer assemblies
GB/T 9074.3-1988 十字槽盘头螺钉和弹簧垫圈组合件
本标准规定了螺纹规格为M3～M6的十字槽盘头螺钉和弹簧垫圈组合件
Cross recessed pan head screw and single coil spring lock washer assemblies
GB/T 9074.7-1988 十字槽小盘头螺钉和弹簧垫圈组合件
本标准规定了螺纹规格为M2.5～M6的十字槽小盘头螺钉和弹簧垫圈组合件
Cross recessed small pan head screw and single coil spring lock washer assemblies
GB/T 9074.12-1988 十字槽凹穴六角头螺栓和弹簧垫圈组合件
本标准规定了螺纹规格为M3～M8的十字槽凹穴六角头螺栓和弹簧垫圈组合件
Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies
GB/T 9074.26-1988 组合件用弹簧垫圈
本标准规定了规格为3～12mm的组合件用弹簧垫圈，适用于紧固件-组合件
Single coil spring lock washer for assembly
GOST 34628-2019 铁路机车车辆弹簧悬架的弹簧和弹簧组件 纵向和组合载荷下的强度分析方法
Springs and spring assemblages of spring suspension of railway rolling stock. Мethods of strength analysis at longitudinal and combined loading
DIN 58556:1987 带可互换零件的快速调整弹簧圆规铅笔和快速调整弹簧圆规组合件
This standard refers to quick setting bow pencil and quick setting bow combination with interchangeable parts for school drawing instruments as well
Quick setting bow pencil and quick setting bow combination with interchangeable parts
GB/T 9074.17-1988 六角头螺栓和弹簧垫圈及平垫圈组合件
本标准规定了螺纹规格为M3～M12的六角头螺栓、弹簧垫圈和平垫圈组合件
Hexagon head bolt, single coil spring lock washer and plain washer assemblies
HB 7149.16-1995 大型系列组合夹具合件 弹簧支座
Spring support for large series combined clamps
JB/T 5372.11-1991 8mm槽系组合夹具其他件 弹簧
8mm groove system combination clamp other parts spring
GB/T 9074.4-1988 十字槽盘头螺钉和弹簧垫圈及平垫圈组合件
本标准规定了螺纹规格为M3～M6的十字槽盘头螺钉、弹簧垫圈和平垫圈组合件
Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies
GB/T 9074.8-1988 十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件
本标准规定了螺纹规格为M2.5～M6的十字槽小盘头螺钉、弹簧垫圈和平垫圈组合件
Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies
GB/T 9074.13-1988 十字槽凹穴六角头螺栓和弹簧垫圈及平垫圈组合件
本标准规定了螺纹规格为M3～M8的十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件
Cross recessed hexagon bolt with indentation, single coil lock washer and plan washer assemblies
DIN 95362:1996 空心棱柱弹簧组件
The elastomer mounts are used for elastic mounting of equipment. They can be used within an environmental temperature range from -30 ?trough 70
Elastomer mounts, hollow-prismatic
BS 3173:1996 床垫用弹簧组合件规范
This British Standard specifies requirements for open coil and pocketed mattress spring units used for the construction of spring interior mattresses
Specification for spring units for mattresses
GB/T 9074.15-1988 六角头螺栓和弹簧垫圈组合件
本标准规定了螺纹规格为M3～M12的六角头螺栓和弹簧垫圈组合件
Hexagon head bolt and single coil spring lock washer assemblies
GB/T 9074.3-1988 十字槽盘头螺钉和弹簧垫圈组合件
本标准规定了螺纹规格为M3～M6的十字槽盘头螺钉和弹簧垫圈组合件
Cross recessed pan head screw and single coil spring lock washer assemblies
GB/T 9074.7-1988 十字槽小盘头螺钉和弹簧垫圈组合件
本标准规定了螺纹规格为M2.5～M6的十字槽小盘头螺钉和弹簧垫圈组合件
Cross recessed small pan head screw and single coil spring lock washer assemblies
GB/T 9074.12-1988 十字槽凹穴六角头螺栓和弹簧垫圈组合件
本标准规定了螺纹规格为M3～M8的十字槽凹穴六角头螺栓和弹簧垫圈组合件
Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies
GB/T 9074.26-1988 组合件用弹簧垫圈
本标准规定了规格为3～12mm的组合件用弹簧垫圈，适用于紧固件-组合件
Single coil spring lock washer for assembly
GOST 34628-2019 铁路机车车辆弹簧悬架的弹簧和弹簧组件 纵向和组合载荷下的强度分析方法
Springs and spring assemblages of spring suspension of railway rolling stock. Мethods of strength analysis at longitudinal and combined loading
DIN 58556:1987 带可互换零件的快速调整弹簧圆规铅笔和快速调整弹簧圆规组合件
This standard refers to quick setting bow pencil and quick setting bow combination with interchangeable parts for school drawing instruments as well
Quick setting bow pencil and quick setting bow combination with interchangeable parts
GB/T 9074.17-1988 六角头螺栓和弹簧垫圈及平垫圈组合件
本标准规定了螺纹规格为M3～M12的六角头螺栓、弹簧垫圈和平垫圈组合件
Hexagon head bolt, single coil spring lock washer and plain washer assemblies
HB 7149.16-1995 大型系列组合夹具合件 弹簧支座
Spring support for large series combined clamps
JB/T 5372.11-1991 8mm槽系组合夹具其他件 弹簧
8mm groove system combination clamp other parts spring
GB/T 9074.4-1988 十字槽盘头螺钉和弹簧垫圈及平垫圈组合件
本标准规定了螺纹规格为M3～M6的十字槽盘头螺钉、弹簧垫圈和平垫圈组合件
Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies
GB/T 9074.8-1988 十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件
本标准规定了螺纹规格为M2.5～M6的十字槽小盘头螺钉、弹簧垫圈和平垫圈组合件
Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies
GB/T 9074.13-1988 十字槽凹穴六角头螺栓和弹簧垫圈及平垫圈组合件
本标准规定了螺纹规格为M3～M8的十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件
Cross recessed hexagon bolt with indentation, single coil lock washer and plan washer assemblies
DIN 95362:1996 空心棱柱弹簧组件
The elastomer mounts are used for elastic mounting of equipment. They can be used within an environmental temperature range from -30 ?trough 70
Elastomer mounts, hollow-prismatic
编辑：北检院编辑部
