GB/T 4950-2002 锌-铝-镉合金牺牲阳极
本标准规定了锌一铝一镉合金牺牲阳极(以下简称牺牲阳极)的分类、要求、试验方法、检验规则以及标志、包装、运输与贮存。 本标准适用于温度低于50℃和电阻率小于l5 Ω·m的海水、淡海水、土壤等电解质中的金属构件阴极保护用的牺牲阳极的设计、制造、检验、贮存等，包括船舶、港工设施、海洋工程、埋地金属管
Sacrificial anode of Zn-Al-Cd alloy
GB/T 4951-2007 锌-铝-镉合金牺牲阳极化学分析方法
本标准规定了锌-铝-镉合金牺牲阳极中铝、镉、铅、铜、铁、硅含量的测定方法。 本标准适用于锌-铝-镉合金牺牲阳极中铝、镉、铅、铜、铁、硅含量的测定。测定范围见表1
Chemical analysis methods for sacrificial anodes of Zn-Al-Cd alloy
GB/T 4951-1985 锌-铝-镉合金牺牲阳极化学分析方法
本标准适用于GB4950-85《锌-铝-镉合金牺牲阳极》中材料化学成分的测定。仲裁分析时必须按本标准规定的方法进行
Sacrificial anode of Zn-Al-Cd alloy--Chemical analysis
GJB 524.16-1988 快艇（滑行艇）系泊和航行试验规程 锌、铝、镉合金牺牲阳极阴极保护试验
Code for mooring and sailing test of speedboats (planing boats) cathodic protection test of zinc, aluminum and cadmium alloy sacrificial anodes
KS D 1938-2003 锌和锌合金的铝、镉、铜、铁、铅含量测定
이 규격은 아연 및 아연합금 중의 알루미늄, 카드뮴, 구리 및 철의 정량 분석 방법에
Determination of element content in zinc and zinc alloy
GB/T 9791-2003 锌、镉、铝-锌合金和锌-铝合金的铬酸盐转化膜 试验方法
本标准规定了下列项目的测试方法：——色铬酸盐转化膜的存在；——锌、镉、铝(质量分数为55％Al)一锌合金和锌一铝(质量分数为5％Al)合金的色和有色铬酸盐 转化膜中六价铬的存在和含量；——锌和镉上单位面积的总铬含量；——色和有色膜的单位面积质量；——铬酸盐转化膜的满意附着力；——铬酸盐膜
Chromate conversion coatings on zinc,cadmium,aluminium-zinc alloys and zinc-aluminium alloys-Test methods
ISO 3613:2000 锌、镉、铝锌合金和锌铝合金的铬酸盐转化膜 试验方法
This International Standard specifies methods for the determination of the
— presence of colourless
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
KS D ISO 3613:2012 锌、镉、铝锌合金和锌铝合金的铬酸盐转化镀层.试验方法
이 표준은 다음과 같은 측정 방법을 규정한다.― 무색 크로메이트 피막의 존재
Metallic and other inorganic coatings－Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys－Test methods
BS EN ISO 3613:2001 锌,镉,铝-锌合金和锌铝合金的铬酸盐转化镀层.试验方法
This International Standard specifies methods for the determination of the
— presence of colourless
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
EN ISO 3613:2021 锌,镉,铝锌合金和锌铝合金的铬酸盐转化膜的试验方法
This document specifies methods for the determination of — the presence of colourless chromate conversion coatings, — the presence of hexavalent
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2021)
EN ISO 3613:1994 锌,镉,铝锌合金和锌铝合金的铬酸盐转化膜的试验方法
Chromate Conversion Coatings on Zinc and Cadmium - Test Methods (ISO 3613 : 1980)
SANS 3613:2008 锌、镉、铝锌合金和锌铝合金的铬酸盐转化涂层.试验方法
Specifies methods for the determination of the presence of colourless chromate conversion coatings; the presence and quantity of hexavalent chromium
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
ISO 3613:2010 金属和其它机涂层.使用锌,镉,铝锌合金与锌铝合金.试验方法
WARNING — This International Standard calls for the use of substances and/or procedures that may be injurious to health if adequate safety measures
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
ISO 3613:2021 金属和其它机涂层. 使用锌,镉, 铝锌合金与锌铝合金. 试验方法
This document specifies methods for the determination of — the presence of colourless chromate conversion coatings, — the presence of hexavalent
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
EN ISO 3613:2001 锌,镉,铝锌合金和锌铝合金的铬酸盐转化膜的试验方法 ISO 3613-2000
Chromate Conversion Coatings on Zinc, Cadmium, Aluminium-Zinc Alloys and Zinc-Aluminium Alloys - Test Methods ISO 3613:2000
GB/T 4950-2002 锌-铝-镉合金牺牲阳极
本标准规定了锌一铝一镉合金牺牲阳极(以下简称牺牲阳极)的分类、要求、试验方法、检验规则以及标志、包装、运输与贮存。 本标准适用于温度低于50℃和电阻率小于l5 Ω·m的海水、淡海水、土壤等电解质中的金属构件阴极保护用的牺牲阳极的设计、制造、检验、贮存等，包括船舶、港工设施、海洋工程、埋地金属管
Sacrificial anode of Zn-Al-Cd alloy
GB/T 4951-2007 锌-铝-镉合金牺牲阳极化学分析方法
本标准规定了锌-铝-镉合金牺牲阳极中铝、镉、铅、铜、铁、硅含量的测定方法。 本标准适用于锌-铝-镉合金牺牲阳极中铝、镉、铅、铜、铁、硅含量的测定。测定范围见表1
Chemical analysis methods for sacrificial anodes of Zn-Al-Cd alloy
GB/T 4951-1985 锌-铝-镉合金牺牲阳极化学分析方法
本标准适用于GB4950-85《锌-铝-镉合金牺牲阳极》中材料化学成分的测定。仲裁分析时必须按本标准规定的方法进行
Sacrificial anode of Zn-Al-Cd alloy--Chemical analysis
GJB 524.16-1988 快艇（滑行艇）系泊和航行试验规程 锌、铝、镉合金牺牲阳极阴极保护试验
Code for mooring and sailing test of speedboats (planing boats) cathodic protection test of zinc, aluminum and cadmium alloy sacrificial anodes
KS D 1938-2003 锌和锌合金的铝、镉、铜、铁、铅含量测定
이 규격은 아연 및 아연합금 중의 알루미늄, 카드뮴, 구리 및 철의 정량 분석 방법에
Determination of element content in zinc and zinc alloy
GB/T 9791-2003 锌、镉、铝-锌合金和锌-铝合金的铬酸盐转化膜 试验方法
本标准规定了下列项目的测试方法：——色铬酸盐转化膜的存在；——锌、镉、铝(质量分数为55％Al)一锌合金和锌一铝(质量分数为5％Al)合金的色和有色铬酸盐 转化膜中六价铬的存在和含量；——锌和镉上单位面积的总铬含量；——色和有色膜的单位面积质量；——铬酸盐转化膜的满意附着力；——铬酸盐膜
Chromate conversion coatings on zinc,cadmium,aluminium-zinc alloys and zinc-aluminium alloys-Test methods
ISO 3613:2000 锌、镉、铝锌合金和锌铝合金的铬酸盐转化膜 试验方法
This International Standard specifies methods for the determination of the
— presence of colourless
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
KS D ISO 3613:2012 锌、镉、铝锌合金和锌铝合金的铬酸盐转化镀层.试验方法
이 표준은 다음과 같은 측정 방법을 규정한다.― 무색 크로메이트 피막의 존재
Metallic and other inorganic coatings－Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys－Test methods
BS EN ISO 3613:2001 锌,镉,铝-锌合金和锌铝合金的铬酸盐转化镀层.试验方法
This International Standard specifies methods for the determination of the
— presence of colourless
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
EN ISO 3613:2021 锌,镉,铝锌合金和锌铝合金的铬酸盐转化膜的试验方法
This document specifies methods for the determination of — the presence of colourless chromate conversion coatings, — the presence of hexavalent
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2021)
EN ISO 3613:1994 锌,镉,铝锌合金和锌铝合金的铬酸盐转化膜的试验方法
Chromate Conversion Coatings on Zinc and Cadmium - Test Methods (ISO 3613 : 1980)
SANS 3613:2008 锌、镉、铝锌合金和锌铝合金的铬酸盐转化涂层.试验方法
Specifies methods for the determination of the presence of colourless chromate conversion coatings; the presence and quantity of hexavalent chromium
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
ISO 3613:2010 金属和其它机涂层.使用锌,镉,铝锌合金与锌铝合金.试验方法
WARNING — This International Standard calls for the use of substances and/or procedures that may be injurious to health if adequate safety measures
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
ISO 3613:2021 金属和其它机涂层. 使用锌,镉, 铝锌合金与锌铝合金. 试验方法
This document specifies methods for the determination of — the presence of colourless chromate conversion coatings, — the presence of hexavalent
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
EN ISO 3613:2001 锌,镉,铝锌合金和锌铝合金的铬酸盐转化膜的试验方法 ISO 3613-2000
Chromate Conversion Coatings on Zinc, Cadmium, Aluminium-Zinc Alloys and Zinc-Aluminium Alloys - Test Methods ISO 3613:2000
编辑：北检院编辑部
