化学转化膜检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

SJ 20813-2002 铝和铝合金规范

Specification for chemical conversion on aluminum and aluminum alloys

SAE AMS-C-5541A-2000 铝和铝合金的

This specification covers the requirements for two classes of chemical conversion coatings formed by the reaction of chemical conversion materials

Chemical Conversion Coatings on Aluminum and Aluminum Alloys

SAE AMS-C-5541-1999 铝和铝合金的

This specification covers the requirements for two classes of chemical conversion coatings formed by the reaction of chemical conversion materials

Chemical Conversion Coatings on Aluminum and Aluminum Alloys

HB 5473-1991 铝及铝合金 质量检验

本标准规定了铝及铝合金化学转化膜层的质量要求和检验方法   本标准适用于按HB/Z193《铝及铝合金化学转化浸渍工艺》处理的航空产品铝及铝合金零(组)件化学转化膜层的质量检验

Aluminum and aluminum alloy chemical conversion coating quality inspection

SAE AMS-C-5541A-2003 铝和铝合金的(AREA MFFP)

This specification covers the requirements for two classes of chemical conversion coatings formed by the reaction of chemical conversion materials

Chemical Conversion Coatings on Aluminum and Aluminum Alloys (AREA MFFP)

GB/T 15519-2002 钢铁黑色氧 规范和试验方法

本标准规定了铁和钢(包括铸铁、锻铁、碳钢、低合金钢和不锈钢)上的黑色氧化膜的要求。黑色氧化膜可用来减小滑动面或支承面间的摩擦,或用于装饰,或减少光反射。这种膜论是否经过附加防腐处理,都可用于需要黑色表面的地方;即使经过附加防腐处理,在轻度腐蚀条件下,也仅能获得很有限的腐蚀防护性能。 本标准对

Chemical conversion coatings--Black oxide coating on iron and steel--Specification and test methods

HB/Z 193-1991 铝及铝合金浸渍工艺

本标准规定了铝及铝合金表面彩色和色化学转化膜层的浸渍工艺方法。   本标准适用于油漆底层的铝及铝合金表面彩色和色化学转化膜层;也可单独作为防腐蚀的铝及铝合金表面彩色和色化学转化膜层

Aluminum and Aluminum Alloy Chemical Conversion Coating Impregnation Process

KS D ISO 11408-2001(2011 钢铁黑氧规范和试验方法

Chemical conversion coatings-Black oxide coating on iron and steel-Specification and test methods

KS W 1120-2001 航空器铝和铝合金的覆层

이 규격은 알루미늄합금의 일반용 화성 피막의 생성 및 시험에 대한 요구 사항에 대하여 규정

Aerospace process-Chemical conversion coatingfor aluminium alloys-General purpose

ISO 11408:1999 钢铁上的黑色氧 规范和试验方法

This International Standard specifies requirements for black oxide coatings on iron and steel (including cast and wrought iron, carbon steel, low

Chemical conversion coatings - Black oxide coating on iron and steel - Specification and test methods

JB/T 10581-2006 铝及铝合金上漂洗和不漂洗铬酸盐

Chemical conversion coatings--Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

BS ISO 11408:1999 .铁和钢上的黑色氧.规范和试验方法

Does not specify requirements for the substrate prior to black oxidizing

Chemical conversion coatings - Black oxide coating on iron and steel - Specification and test methods

GB/T 39495-2020 金属及其他机覆盖层 铝及铝合金铬

本标准规定了铝及铝合金水洗和免洗铬化学转化膜的分类、要求和试验方法以及抽样检验程序。 本标准适用于挤压铝及铝合金零部件、型材、卷材、板材以及铸造铝合金部件的铬化学转化膜。 铬化学转化膜可单独作为防腐层,也可作为有机涂层(如涂料、橡胶、胶黏剂)的底层

Metallic and other inorganic coatings—Chromate-free chemical conversion coatings on allumion and its alloys

GB/T 17460-1998 铝及铝合金上漂洗和不漂洗铬酸盐

本标准规定了有关铝及铝合金上漂洗和不漂洗铬酸盐转化膜的特性、成膜方法、技术要求、抽样试样、分类和膜层鉴定。 本标准适用于挤压铝制品、铸铝件和铝卷材(带材、线材)等的表面化学转化处理

Chemical conversion coatings--Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

KS D ISO 10546:2009 .铝和铝合金上漂洗和未漂洗的铬酸盐

이 표준은 알루미늄이나 알루미늄 합금에 방식용 혹은 다른 코팅의 바탕으로 사용하기 위해 하

Chemical conversion coatings-Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

SJ 20813-2002 铝和铝合金规范

Specification for chemical conversion on aluminum and aluminum alloys

SAE AMS-C-5541A-2000 铝和铝合金的

This specification covers the requirements for two classes of chemical conversion coatings formed by the reaction of chemical conversion materials

Chemical Conversion Coatings on Aluminum and Aluminum Alloys

SAE AMS-C-5541-1999 铝和铝合金的

This specification covers the requirements for two classes of chemical conversion coatings formed by the reaction of chemical conversion materials

Chemical Conversion Coatings on Aluminum and Aluminum Alloys

HB 5473-1991 铝及铝合金 质量检验

本标准规定了铝及铝合金化学转化膜层的质量要求和检验方法   本标准适用于按HB/Z193《铝及铝合金化学转化浸渍工艺》处理的航空产品铝及铝合金零(组)件化学转化膜层的质量检验

Aluminum and aluminum alloy chemical conversion coating quality inspection

SAE AMS-C-5541A-2003 铝和铝合金的(AREA MFFP)

This specification covers the requirements for two classes of chemical conversion coatings formed by the reaction of chemical conversion materials

Chemical Conversion Coatings on Aluminum and Aluminum Alloys (AREA MFFP)

GB/T 15519-2002 钢铁黑色氧 规范和试验方法

本标准规定了铁和钢(包括铸铁、锻铁、碳钢、低合金钢和不锈钢)上的黑色氧化膜的要求。黑色氧化膜可用来减小滑动面或支承面间的摩擦,或用于装饰,或减少光反射。这种膜论是否经过附加防腐处理,都可用于需要黑色表面的地方;即使经过附加防腐处理,在轻度腐蚀条件下,也仅能获得很有限的腐蚀防护性能。 本标准对

Chemical conversion coatings--Black oxide coating on iron and steel--Specification and test methods

HB/Z 193-1991 铝及铝合金浸渍工艺

本标准规定了铝及铝合金表面彩色和色化学转化膜层的浸渍工艺方法。   本标准适用于油漆底层的铝及铝合金表面彩色和色化学转化膜层;也可单独作为防腐蚀的铝及铝合金表面彩色和色化学转化膜层

Aluminum and Aluminum Alloy Chemical Conversion Coating Impregnation Process

KS D ISO 11408-2001(2011 钢铁黑氧规范和试验方法

Chemical conversion coatings-Black oxide coating on iron and steel-Specification and test methods

KS W 1120-2001 航空器铝和铝合金的覆层

이 규격은 알루미늄합금의 일반용 화성 피막의 생성 및 시험에 대한 요구 사항에 대하여 규정

Aerospace process-Chemical conversion coatingfor aluminium alloys-General purpose

ISO 11408:1999 钢铁上的黑色氧 规范和试验方法

This International Standard specifies requirements for black oxide coatings on iron and steel (including cast and wrought iron, carbon steel, low

Chemical conversion coatings - Black oxide coating on iron and steel - Specification and test methods

JB/T 10581-2006 铝及铝合金上漂洗和不漂洗铬酸盐

Chemical conversion coatings--Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

BS ISO 11408:1999 .铁和钢上的黑色氧.规范和试验方法

Does not specify requirements for the substrate prior to black oxidizing

Chemical conversion coatings - Black oxide coating on iron and steel - Specification and test methods

GB/T 39495-2020 金属及其他机覆盖层 铝及铝合金铬

本标准规定了铝及铝合金水洗和免洗铬化学转化膜的分类、要求和试验方法以及抽样检验程序。 本标准适用于挤压铝及铝合金零部件、型材、卷材、板材以及铸造铝合金部件的铬化学转化膜。 铬化学转化膜可单独作为防腐层,也可作为有机涂层(如涂料、橡胶、胶黏剂)的底层

Metallic and other inorganic coatings—Chromate-free chemical conversion coatings on allumion and its alloys

GB/T 17460-1998 铝及铝合金上漂洗和不漂洗铬酸盐

本标准规定了有关铝及铝合金上漂洗和不漂洗铬酸盐转化膜的特性、成膜方法、技术要求、抽样试样、分类和膜层鉴定。 本标准适用于挤压铝制品、铸铝件和铝卷材(带材、线材)等的表面化学转化处理

Chemical conversion coatings--Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

KS D ISO 10546:2009 .铝和铝合金上漂洗和未漂洗的铬酸盐

이 표준은 알루미늄이나 알루미늄 합금에 방식용 혹은 다른 코팅의 바탕으로 사용하기 위해 하

Chemical conversion coatings-Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。