DIN EN 876:1995 金属材料焊接接头的破坏性测试
Destructive testing of welded joints on metallic materials
GB/T 28896-2012 金属材料.焊接接头准静态断裂韧度测定的试验方法
本标准规定了测试金属材料焊接接头焊缝金属及其热影响区部位断裂韧度K、δ(裂纹张开位移,CTOD)和J积分的具体试验过程与方法。 本标准是GB/T 21143的补充,GB/T 21143涵盖了有关断裂韧度测试的所有方面,与本标准在使用过程中有着非常紧密的联系。本标准所介绍的断裂韧度测试方法适用于测定
Metallic materials.Method of test for the determination of quasistatic fracture toughness of welds
DIN EN 1321:1996 金属材料焊接接头的破坏性检测。宏观和微观检验
Destructive testing of welded joints on metallic materials. Macroscopic and microscopic examinations
GB/T 28896-2023 金属材料 焊接接头准静态断裂韧度测定的试验方法
Test method for quasi-static fracture toughness of welded joints of metallic materials
DIN EN 1043-2:1996 金属材料焊接接头的破坏性测试 硬度测试 DIN 第2部分：焊接接头的显微硬度测试
Destructive testing of welded joints on metallic materials Hardness testing DIN Part 2: Microhardness testing on welded joints
DIN EN ISO 9016:2022 金属材料焊接接头的破坏性试验缺口冲击弯曲试验样品位置、缺口方向和评估（ISO 9016:2022）
Destructive testing of welded joints on metallic materials – notched impact bending test – sample position, notch direction and assessment (ISO 9016:2022)
JIS Z 3175:2016 用于异种金属材料摩擦焊接接头的质量评价试验方法和分类
Methods of test and classification of quality evaluations for friction welded joints on dissimilar metallic materials
BS EN 4677-001:2012 航空航天系列.航空航天结构用焊接和钎焊装配组件.电子束焊接金属材料接头.焊接部件质量
Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding. Quality of welded assemblies
DIN EN 4678:2012 航空航天系列.航空航天结构焊件和铜焊.激光焊接金属材料接头.焊接质量.德文和英文版 EN 4678-2011
Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments; German and English version EN 4678:2011
GB/T 27552-2011 金属材料焊缝破坏性试验 焊接接头显微硬度试验
本标准规定了硬度梯度大的金属材料焊接接头横截面显微硬度试验。依据ISO 6507-1-2005进行维氏硬度试验，通常使用的试验力范围为0.98N到小于49.03N（HV 0.1到小于HV 5）。 注 :硬度试验应确保测出焊缝金属和两侧母材（两侧母材为不同金属材料）的最高硬度和最低硬度。 本
Destructive tests on welds in metallic materials.Microhardness testing of welded joints
GB/T 27552-2021 金属材料焊缝破坏性试验 焊接接头显微硬度试验
本文件规定了依据GB/T4340.1 进行焊接接头显微硬度试验[试验力范围通常为0.98 N~<49.03N(HV0.1~ Destructive tests on welds in metallic materials—Microhardness testing of welded joints This standard defines the rules to be observed to ensure the quality of aerospace structures in metallic materials by (solid code 521 and gas code 522 Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments This European Standard defines the rules to be observed to ensure the quality of aerospace structures in metallic materials by (solid reference number Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments (Endorsed by AENOR in September of 2011.) Destructive testing of welded joints on metallic materials 本标准规定了测试金属材料焊接接头焊缝金属及其热影响区部位断裂韧度K、δ(裂纹张开位移,CTOD)和J积分的具体试验过程与方法。
本标准是GB/T 21143的补充,GB/T 21143涵盖了有关断裂韧度测试的所有方面,与本标准在使用过程中有着非常紧密的联系。本标准所介绍的断裂韧度测试方法适用于测定 Metallic materials.Method of test for the determination of quasistatic fracture toughness of welds Destructive testing of welded joints on metallic materials. Macroscopic and microscopic examinations Test method for quasi-static fracture toughness of welded joints of metallic materials Destructive testing of welded joints on metallic materials Hardness testing DIN Part 2: Microhardness testing on welded joints Destructive testing of welded joints on metallic materials – notched impact bending test – sample position, notch direction and assessment (ISO 9016:2022) Methods of test and classification of quality evaluations for friction welded joints on dissimilar metallic materials Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding. Quality of welded assemblies Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments; German and English version EN 4678:2011 本标准规定了硬度梯度大的金属材料焊接接头横截面显微硬度试验。依据ISO 6507-1-2005进行维氏硬度试验，通常使用的试验力范围为0.98N到小于49.03N（HV 0.1到小于HV 5）。
注 :硬度试验应确保测出焊缝金属和两侧母材（两侧母材为不同金属材料）的最高硬度和最低硬度。
本 Destructive tests on welds in metallic materials.Microhardness testing of welded joints 本文件规定了依据GB/T4340.1 进行焊接接头显微硬度试验[试验力范围通常为0.98 N~<49.03N(HV0.1~ Destructive tests on welds in metallic materials—Microhardness testing of welded joints This standard defines the rules to be observed to ensure the quality of aerospace structures in metallic materials by (solid code 521 and gas code 522 Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments This European Standard defines the rules to be observed to ensure the quality of aerospace structures in metallic materials by (solid reference number Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments (Endorsed by AENOR in September of 2011.) 编辑：北检院编辑部 DS/EN 4678:2011 航空航天系列 航空航天结构用焊件和钎焊件 激光束焊接金属材料接头 焊件质量
EN 4678:2011 航空航天系列 航空航天结构用焊件和钎焊件 激光束焊接金属材料接头 焊件质量
LST EN 4678-2011 航空航天系列 航空航天结构用焊件和钎焊件 激光束焊接金属材料接头 焊件质量
UNE-EN 4678:2011 航空航天系列 航空航天结构的焊件和钎焊件 激光束焊接金属材料的接头 焊件质量
DIN EN 876:1995 金属材料焊接接头的破坏性测试
GB/T 28896-2012 金属材料.焊接接头准静态断裂韧度测定的试验方法
DIN EN 1321:1996 金属材料焊接接头的破坏性检测。宏观和微观检验
GB/T 28896-2023 金属材料 焊接接头准静态断裂韧度测定的试验方法
DIN EN 1043-2:1996 金属材料焊接接头的破坏性测试 硬度测试 DIN 第2部分：焊接接头的显微硬度测试
DIN EN ISO 9016:2022 金属材料焊接接头的破坏性试验缺口冲击弯曲试验样品位置、缺口方向和评估（ISO 9016:2022）
JIS Z 3175:2016 用于异种金属材料摩擦焊接接头的质量评价试验方法和分类
BS EN 4677-001:2012 航空航天系列.航空航天结构用焊接和钎焊装配组件.电子束焊接金属材料接头.焊接部件质量
DIN EN 4678:2012 航空航天系列.航空航天结构焊件和铜焊.激光焊接金属材料接头.焊接质量.德文和英文版 EN 4678-2011
GB/T 27552-2011 金属材料焊缝破坏性试验 焊接接头显微硬度试验
GB/T 27552-2021 金属材料焊缝破坏性试验 焊接接头显微硬度试验
DS/EN 4678:2011 航空航天系列 航空航天结构用焊件和钎焊件 激光束焊接金属材料接头 焊件质量
EN 4678:2011 航空航天系列 航空航天结构用焊件和钎焊件 激光束焊接金属材料接头 焊件质量
LST EN 4678-2011 航空航天系列 航空航天结构用焊件和钎焊件 激光束焊接金属材料接头 焊件质量
UNE-EN 4678:2011 航空航天系列 航空航天结构的焊件和钎焊件 激光束焊接金属材料的接头 焊件质量
相关文章
