超高分子量聚乙烯熔化焓、结晶度和熔点检测

YY/T 0815-2010 差示扫描量热法测定超高分子量聚乙烯熔化焓、结晶度和熔点

本标准描述了超高分子量聚乙烯（UHMWPE)熔化焓和熔点的测定方法，以及结晶度的计算方法。 本方法可用于粉料、固化成型后的材料、成品或使用过的UHMWPE。本方法也可用于经辐射的或化学交联的UHMWPE的熔化焓、熔点和结晶度的测定。 本方法不针对具体应用指定结晶度范围或熔点。 以国际单位

Standard test method for measurement of enthalpy of fusion, percent crystallinity ，and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry

ASTM F2625-10(2016 采用差示扫描量热法测量超高分子量聚乙烯的熔融焓, 结晶度和熔点的标准试验方法

5.1 The crystallinity of UHMWPE will influence its

Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

ASTM F2625-07 用差示扫描量热法测量超高分子量聚乙烯的焓点、百分比结晶度和熔点的标准试验方法

The crystallinity of UHMWPE will influence its mechanical properties, such as creep and stiffness. The reported crystallinity

Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

SH/T 1826-2019 塑料 超高分子量聚乙烯(PE-UHMW)材料和制品熔融焓和结晶度及熔融温度的测定 差示扫描量热法（DSC）

Determination of melting enthalpy, crystallinity and melting temperature of plastic ultra-high molecular weight polyethylene (PE-UHMW) materials and products by differential scanning calorimetry (DSC)

ASTM F2625-10 用差示扫描量热法测量超高分子量聚乙烯的焓点,百分比晶度和熔点的标准试验方法

The crystallinity of UHMWPE will influence its mechanical properties, such as creep and stiffness. The reported crystallinity

Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

BS EN ISO 11357-3:2013 塑料.差示扫描量热法(DSC).熔化焓、结晶焓和温度的测定

Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization

NF T51-507-3:2013 塑料.差示扫描量热法(DSC).第3部分:温度、熔化焓和结晶焓的测定

Plastics - Differential scanning calorimetry (DSC) - Part 3: determination of temperature and enthalpy of melting and crystallization

T/CSIQ 72003-2020 硬聚氯乙烯管材 微晶熔融焓的测定 差示扫描量热法(DSC)

本标准规定了一种测定硬聚氯乙烯（PVC）管材样品微晶熔融焓的方法。该方法基于使用差示扫描量热仪测量样品的热历史，适用于各种类型的硬PVC管材

Rigid PVC pipes—Measurement of enthalpy of fusion of crystallites—Differential scanning calorimetry (DSC) method

T/CAMDI 079-2022 外科植入物用大剂量辐照交联超高分子量聚乙烯制品

本文件规定了外科植入物用大剂量辐照交联超高分子量聚乙烯（以下简称交联超高分子量聚乙烯）制品的要求及试验方法。 本文件涉及满足GB/T 19701.1、GB/T 19701.2所有要求的超高分子量聚乙烯树脂粉料、加工成型的模塑料（棒材、板材），以及交联制品。 本文件仅适用于经过

Standard guide for extensively irradiation-crosslinked ultra-high molecular weight polyethylene fabricated form for surgical implant applications

ASTM D3418-12e1 用差示扫描量热法测定聚合物转变温度和熔化焓及结晶焓的标准试验方法

1.1 This test method covers determination of transition temperatures and enthalpies of fusion and crystallization of polymers by differential scanning

Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

ASTM D3418-12 用差示扫描量热法测定聚合物转变温度和熔化焓及结晶焓的标准试验方法

1.1 This test method covers determination of transition temperatures and enthalpies of fusion and crystallization of polymers by differential scanning

Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

GB/T 40169-2021 超高分子量聚乙烯（PE-UHMW）和高密度聚乙烯（PE-HD）模塑板材

本标准规定了超高分子量聚乙烯(PE-UHMW)和高密度聚乙烯(PE-HD)模塑板材(简称板材)的符号、代号和缩略语、分类、命名、材料、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于厚度在10 mm~200 mm 的PE-UHMW板材和PE-HD板材。本标准不适用于含填料和增强材料的

Compression-moulded plates of ultra-high-molecular-weight polyethylene（PE-UHMW）and high density polyethylene (PE-HD)

FZ/T 63028-2015 超高分子量聚乙烯网线

本标准规定了超高分子量聚乙烯网线的术语和定义、标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于超高分子量聚乙烯纤维捻制而成的网线

Ultra-high molecular weight polyethylene netting twine

FZ/T 54027-2010 超高分子量聚乙烯长丝

本标准规定了超高分子量聚乙烯长丝的术语和定义、分类和标识、技术要求、试验方法、检验规则和标志、包装、运输、贮存的要求。 本标准适用于名义线密度范围在55dtex～3555dtex超高分子量聚乙烯长丝的鉴定和验收，其他超高分子量聚乙烯长丝可参照使用

Ultra-high molecular weight polyethylene (UHMWPE) filament yarns

DB41/T 893-2014 超高分子量聚乙烯板材

UHMWPE sheet

YY/T 0815-2010 差示扫描量热法测定超高分子量聚乙烯熔化焓、结晶度和熔点

本标准描述了超高分子量聚乙烯（UHMWPE)熔化焓和熔点的测定方法，以及结晶度的计算方法。 本方法可用于粉料、固化成型后的材料、成品或使用过的UHMWPE。本方法也可用于经辐射的或化学交联的UHMWPE的熔化焓、熔点和结晶度的测定。 本方法不针对具体应用指定结晶度范围或熔点。 以国际单位

Standard test method for measurement of enthalpy of fusion, percent crystallinity ，and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry

ASTM F2625-10(2016 采用差示扫描量热法测量超高分子量聚乙烯的熔融焓, 结晶度和熔点的标准试验方法

5.1 The crystallinity of UHMWPE will influence its

Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

ASTM F2625-07 用差示扫描量热法测量超高分子量聚乙烯的焓点、百分比结晶度和熔点的标准试验方法

The crystallinity of UHMWPE will influence its mechanical properties, such as creep and stiffness. The reported crystallinity

Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

SH/T 1826-2019 塑料 超高分子量聚乙烯(PE-UHMW)材料和制品熔融焓和结晶度及熔融温度的测定 差示扫描量热法（DSC）

Determination of melting enthalpy, crystallinity and melting temperature of plastic ultra-high molecular weight polyethylene (PE-UHMW) materials and products by differential scanning calorimetry (DSC)

ASTM F2625-10 用差示扫描量热法测量超高分子量聚乙烯的焓点,百分比晶度和熔点的标准试验方法

The crystallinity of UHMWPE will influence its mechanical properties, such as creep and stiffness. The reported crystallinity

Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

BS EN ISO 11357-3:2013 塑料.差示扫描量热法(DSC).熔化焓、结晶焓和温度的测定

Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization

NF T51-507-3:2013 塑料.差示扫描量热法(DSC).第3部分:温度、熔化焓和结晶焓的测定

Plastics - Differential scanning calorimetry (DSC) - Part 3: determination of temperature and enthalpy of melting and crystallization

T/CSIQ 72003-2020 硬聚氯乙烯管材 微晶熔融焓的测定 差示扫描量热法(DSC)

本标准规定了一种测定硬聚氯乙烯（PVC）管材样品微晶熔融焓的方法。该方法基于使用差示扫描量热仪测量样品的热历史，适用于各种类型的硬PVC管材

Rigid PVC pipes—Measurement of enthalpy of fusion of crystallites—Differential scanning calorimetry (DSC) method

T/CAMDI 079-2022 外科植入物用大剂量辐照交联超高分子量聚乙烯制品

本文件规定了外科植入物用大剂量辐照交联超高分子量聚乙烯（以下简称交联超高分子量聚乙烯）制品的要求及试验方法。 本文件涉及满足GB/T 19701.1、GB/T 19701.2所有要求的超高分子量聚乙烯树脂粉料、加工成型的模塑料（棒材、板材），以及交联制品。 本文件仅适用于经过

Standard guide for extensively irradiation-crosslinked ultra-high molecular weight polyethylene fabricated form for surgical implant applications

ASTM D3418-12e1 用差示扫描量热法测定聚合物转变温度和熔化焓及结晶焓的标准试验方法

1.1 This test method covers determination of transition temperatures and enthalpies of fusion and crystallization of polymers by differential scanning

Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

ASTM D3418-12 用差示扫描量热法测定聚合物转变温度和熔化焓及结晶焓的标准试验方法

1.1 This test method covers determination of transition temperatures and enthalpies of fusion and crystallization of polymers by differential scanning

Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

GB/T 40169-2021 超高分子量聚乙烯（PE-UHMW）和高密度聚乙烯（PE-HD）模塑板材

本标准规定了超高分子量聚乙烯(PE-UHMW)和高密度聚乙烯(PE-HD)模塑板材(简称板材)的符号、代号和缩略语、分类、命名、材料、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于厚度在10 mm~200 mm 的PE-UHMW板材和PE-HD板材。本标准不适用于含填料和增强材料的

Compression-moulded plates of ultra-high-molecular-weight polyethylene（PE-UHMW）and high density polyethylene (PE-HD)

FZ/T 63028-2015 超高分子量聚乙烯网线

本标准规定了超高分子量聚乙烯网线的术语和定义、标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于超高分子量聚乙烯纤维捻制而成的网线

Ultra-high molecular weight polyethylene netting twine

FZ/T 54027-2010 超高分子量聚乙烯长丝

本标准规定了超高分子量聚乙烯长丝的术语和定义、分类和标识、技术要求、试验方法、检验规则和标志、包装、运输、贮存的要求。 本标准适用于名义线密度范围在55dtex～3555dtex超高分子量聚乙烯长丝的鉴定和验收，其他超高分子量聚乙烯长丝可参照使用

Ultra-high molecular weight polyethylene (UHMWPE) filament yarns

DB41/T 893-2014 超高分子量聚乙烯板材

UHMWPE sheet