带圆角圆孔固定的硬质合金可转位刀片检测

GB/T 2078-2007 带圆角圆孔固定的硬质合金可转位刀片尺寸

本标准规定了带有圆角、圆形固定孔和带有O⁰法后角的硬质合金可转位刀片的尺寸。 本标准适用于带有圆角、圆形固定孔和带有O⁰法后角的硬质合金可转位刀片，通过顶部和孔夹固方式或只用孔夹固的方式安装在切削、钻削工具上

Indexable hardmetal(carbide)insers with rounded corners,with cylindrical fixing hole-Dimensions

GB/T 2078-2019 带圆角圆孔固定的硬质合金可转位刀片尺寸

Dimensions of indexable hardmetal (carbide) inserts with rounded corners,with cylindrical fixing hole

DIN 4988:2004 带圆柱形固定孔和倒圆角的硬质合金可转位刀片

Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole

NF E66-308*NF ISO 6987:2012 带有圆角和部分圆柱形固定孔的硬质合金可转位刀片 尺寸

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions

0 带部分圆柱形固定孔的圆角的可转位硬质合金镶嵌刀片.尺寸

ISO 3364:2017 带圆柱固定孔圆角硬质合金可转位刀片尺寸

This document specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole and with 0° normal

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

GB/T 2080-2007 带圆角沉孔固定的硬质合金可转位刀片尺寸

本标准规定了带圆角、沉孔固定的硬质合金可转位刀片的尺寸。 本标准适用于通过沉头螺钉固定或其他方式(如插销固定)安装在切削、钻削工具上的，带圆角的、沉孔固定的硬质合金可转位刀片

Indexable hard material inserts with rounded corners,with partly cylindrical fixing hole-Dimensions

DIN ISO 3364:2018-08 带圆角的可转位硬质合金（硬质合金）刀片 带圆柱形固定孔 尺寸

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions (ISO 3364:2017)

GB/T 2079-2015 带圆角固定孔的硬质合金可转位刀片 尺寸

本标准规定了带圆角固定孔的硬质合金可转位刀片的尺寸。 本标准适用于带圆角固定孔的硬质合金可转位刀片

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole.Dimensions

BS ISO 6987:2012 带圆角沉孔固定的硬质合金可转位刀片尺寸

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions

GB 2078-1987 带圆孔的硬质合金可转位刀片

Indexable hartmetal (carbide) inserts with rounded corners, with cyindrical fixing hole

GB/T 2078-1987 带圆孔的硬质合金可转位刀片

本标准适用于机械夹固式刀具用的带圆形固定孔的硬质合金可转位刀片。 本标准等效采用国际标准ISO3364-1985《带圆孔的硬质合金可转位刀片

Indexable hardmetal(carbide) inserts with rounded corners, with cylindrical fixing hole

SIS SS 2656-1988 圆形沉孔固定的硬质合金可转位刀片．三角形刀片

I denna standard anges m?tt och toleranser f?r triangul?ra v?ndsk?r av h?rdmetall med rundade h?rn och cylindriskt f?sth?l. Standarden omfattar tre

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Triangular inserts

NF E66-307*NF ISO 883:2014 固定孔圆角可转位硬金属（硬质合金）刀片 尺寸

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole - Dimensions

BS ISO 3364:2011 带圆角沉孔固定的硬质合金(碳化合金)可转位刀片尺寸

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole. Dimensions

GB/T 2078-2007 带圆角圆孔固定的硬质合金可转位刀片尺寸

本标准规定了带有圆角、圆形固定孔和带有O⁰法后角的硬质合金可转位刀片的尺寸。 本标准适用于带有圆角、圆形固定孔和带有O⁰法后角的硬质合金可转位刀片，通过顶部和孔夹固方式或只用孔夹固的方式安装在切削、钻削工具上

Indexable hardmetal(carbide)insers with rounded corners,with cylindrical fixing hole-Dimensions

GB/T 2078-2019 带圆角圆孔固定的硬质合金可转位刀片尺寸

Dimensions of indexable hardmetal (carbide) inserts with rounded corners,with cylindrical fixing hole

DIN 4988:2004 带圆柱形固定孔和倒圆角的硬质合金可转位刀片

Indexable hardmetal inserts with rounded corners, with cylindrical fixation hole

NF E66-308*NF ISO 6987:2012 带有圆角和部分圆柱形固定孔的硬质合金可转位刀片 尺寸

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions

0 带部分圆柱形固定孔的圆角的可转位硬质合金镶嵌刀片.尺寸

ISO 3364:2017 带圆柱固定孔圆角硬质合金可转位刀片尺寸

This document specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole and with 0° normal

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

GB/T 2080-2007 带圆角沉孔固定的硬质合金可转位刀片尺寸

本标准规定了带圆角、沉孔固定的硬质合金可转位刀片的尺寸。 本标准适用于通过沉头螺钉固定或其他方式(如插销固定)安装在切削、钻削工具上的，带圆角的、沉孔固定的硬质合金可转位刀片

Indexable hard material inserts with rounded corners,with partly cylindrical fixing hole-Dimensions

DIN ISO 3364:2018-08 带圆角的可转位硬质合金（硬质合金）刀片 带圆柱形固定孔 尺寸

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions (ISO 3364:2017)

GB/T 2079-2015 带圆角固定孔的硬质合金可转位刀片 尺寸

本标准规定了带圆角固定孔的硬质合金可转位刀片的尺寸。 本标准适用于带圆角固定孔的硬质合金可转位刀片

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole.Dimensions

BS ISO 6987:2012 带圆角沉孔固定的硬质合金可转位刀片尺寸

Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions

GB 2078-1987 带圆孔的硬质合金可转位刀片

Indexable hartmetal (carbide) inserts with rounded corners, with cyindrical fixing hole

GB/T 2078-1987 带圆孔的硬质合金可转位刀片

本标准适用于机械夹固式刀具用的带圆形固定孔的硬质合金可转位刀片。 本标准等效采用国际标准ISO3364-1985《带圆孔的硬质合金可转位刀片

Indexable hardmetal(carbide) inserts with rounded corners, with cylindrical fixing hole

SIS SS 2656-1988 圆形沉孔固定的硬质合金可转位刀片．三角形刀片

I denna standard anges m?tt och toleranser f?r triangul?ra v?ndsk?r av h?rdmetall med rundade h?rn och cylindriskt f?sth?l. Standarden omfattar tre

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Triangular inserts

NF E66-307*NF ISO 883:2014 固定孔圆角可转位硬金属（硬质合金）刀片 尺寸

Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole - Dimensions

BS ISO 3364:2011 带圆角沉孔固定的硬质合金(碳化合金)可转位刀片尺寸

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole. Dimensions