GB/T 10002.3-1996 埋地排污、废水用硬聚氯乙烯（PVC-U）管材
本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的埋地排污、废水用硬聚氯乙烯管材（以下简称管材）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从110～630mm的弹性密封圈连接和外径从110～200mm的粘接式连接的埋地排污、废水用管材。在考虑
Unplasticized polyvinyl chloride (PVC-U) pipes for buried drainage and sewerage systems
GB/T 20221-2006 压埋地排污、排水用硬聚氯乙烯(PVC-U)管材
本标准规定了以聚氯乙烯树脂为主要原料、经挤出成型的压埋地排污、排水用硬聚氯乙烯（PVC-U）管材（以下简称“管材”）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从（110～1000）mm的弹性密封圈连接和外径从（110～200）mm的粘接式
Unplatsticized poly (Vinyl chloride)(PVC-U) pipes for non-pressure buried drainage and sewerage systems
T/GDPIA 2-2019 埋地排水排污用聚氯乙烯合金双壁波纹管材
本标准规定了埋地排水排污用聚氯乙烯合金双壁波纹管材（以下简称“管材”）的定义、符号、材料、产品分类与标记、结构与连接方式、技术要求、试验方法、检验规则和标志、运输、贮存。 本标准适用于压埋地排水排污用的聚氯乙烯合金双壁波纹管材
Polyvinyl chloride alloy double-wall corrugated pipes for buried drainage and sewage
GB/T 20221-2023 压埋地排污、排水用硬聚氯乙烯（PVC-U）管材
Pressureless buried sewage and drainage rigid polyvinyl chloride (PVC-U) pipes
DB13/T 950-2008 再生硬聚氯乙烯（PVC-U）压埋地排污、排水用管材
本标准参考GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》制定。 本标准与GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》主要技术变化 — 密度由≤1.55g/cm3，改为≤1.6g
Regenerated rigid polyvinyl chloride (PVC-U) non-pressure buried sewage and drainage pipes
ISO 8772:1991 埋地污废水排放用高密度聚乙烯管材和管件 规范
This International Standard specifies requirements for high-density polyethylene (PE-HD) pipes, fittings and joints with nominal outside diameters
High density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems; specifications
T/CPPIA 3-2020 埋地排水排污用抗冲改性聚氯乙烯（PVC-M）双壁波纹管材
8.1 颜色 管材内外层应色泽均匀，颜色一般为蓝色，其他颜色可由供需双方协商确定。 8.2 外观 8.2.1 管材内外壁不允许有气泡、裂口、分解变色线及明显的杂质和不规则波纹。管材内壁应光滑，管材端面应平整并与轴线垂直。 8.2.2 管材波谷区内外壁应紧密熔接，不应出现脱开现象。 8.3
Modified impact resistance poly (vinyl chloride) (PVC-M) double wall corrugated pipes for underground soil waste and drainage
T/CECS 10011-2019 埋地排水用聚乙烯共混聚氯乙烯双壁波纹管材
本标准规定了埋地排水用聚乙烯共混聚氯乙烯双壁波纹管材的术语和符号、材料、分类及标记、要求、试验方法、检验规则和标志、运输、贮存
Polyethylene mixed polyvinyl chloride double wall corrugated pipe for underground sewer
ISO 8772:2006 高压埋地污废水排放用塑料管道系统.聚乙烯管材(PE)
This International Standard specifies the requirements for polyethylene (PE) pipes, fittings and piping systems intended for use for non-pressure
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE)
ISO 8773:1991 埋地污废水排放用聚丙烯管材和管件 规范
This International Standard specifies requirements for polypropylene (PP) homopolymer and copolymer pipes, fittings and joints with nominal outside
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems; specifications
KS M ISO 7073:2005 对安装埋地硬聚氯乙烯(PVC-U)排污、废水管的推荐技术
이 기술보고서는 배수 및 하수용 지름 630 mm까지의 무가소화 폴리염화비닐(PVC-U
Recommended techniques for the installation of unplasticized poly(vinyl chloride)(PVC－U) buried drains and sewers
ISO/TR 7073:1988 对安装埋地硬聚氯乙烯(PVC-U)排污、废水管的推荐技术
Includes recommendations concerning installation of PVC-U-pipes and fittings up to 630 mm diameter, trenchwork, pipe laying and backfilling
Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers
GB/T 18477-2001 埋地排水用硬聚氯乙烯(PVC-U)双壁波纹管材
本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的埋地排水用硬聚氯乙烯(PVC-U)双壁波纹管材（以下简称“管材”）的产品分类、材料、技术要求、试验方法、检验规则和标志、运输、贮存。 本标准适用于市政排水、埋地压农田排水和建筑物外排水用管材。在考虑到材料的耐化学性和耐温性后亦可用
Unplasticized polyvinyl chloride(PVC-U) double wall corrugated pipes for underground soil,waste and drainage
T/SCJC P02-2021 埋地排水用 改性聚氯乙烯（PVMK）双壁波纹管材
7 技术要求 7.1 颜色 管材内外层应色泽均匀，颜色由供需双方协商确定。 7.2 外观 管材内外壁不应有气泡、裂口、分解变色线及明显的杂质和不规则波纹。管材内壁应光滑，管材两端应平整并与轴线垂直。管材波谷区内外壁应紧密熔接，不应出现脱开现象
Modified Polyvinyl Chloride（PVMK）Double Wall corrugated pipe for underground drainage
KS 06-217-1981 肯尼亚埋地排水排污用硬聚氯乙烯管材和配件的标准规格
This standard specifies requirements for unplasticized polyvinyl chloride (UPVC) pipes, fittings and suitable accessories for the construction
KENYA STANDARD SPECIFICATION FOR UNPLASTICIZED PVC PIPES AND FITTINGS FOR BURIED DRAIN AND SEWER
GB/T 10002.3-1996 埋地排污、废水用硬聚氯乙烯（PVC-U）管材
本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的埋地排污、废水用硬聚氯乙烯管材（以下简称管材）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从110～630mm的弹性密封圈连接和外径从110～200mm的粘接式连接的埋地排污、废水用管材。在考虑
Unplasticized polyvinyl chloride (PVC-U) pipes for buried drainage and sewerage systems
GB/T 20221-2006 压埋地排污、排水用硬聚氯乙烯(PVC-U)管材
本标准规定了以聚氯乙烯树脂为主要原料、经挤出成型的压埋地排污、排水用硬聚氯乙烯（PVC-U）管材（以下简称“管材”）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从（110～1000）mm的弹性密封圈连接和外径从（110～200）mm的粘接式
Unplatsticized poly (Vinyl chloride)(PVC-U) pipes for non-pressure buried drainage and sewerage systems
T/GDPIA 2-2019 埋地排水排污用聚氯乙烯合金双壁波纹管材
本标准规定了埋地排水排污用聚氯乙烯合金双壁波纹管材（以下简称“管材”）的定义、符号、材料、产品分类与标记、结构与连接方式、技术要求、试验方法、检验规则和标志、运输、贮存。 本标准适用于压埋地排水排污用的聚氯乙烯合金双壁波纹管材
Polyvinyl chloride alloy double-wall corrugated pipes for buried drainage and sewage
GB/T 20221-2023 压埋地排污、排水用硬聚氯乙烯（PVC-U）管材
Pressureless buried sewage and drainage rigid polyvinyl chloride (PVC-U) pipes
DB13/T 950-2008 再生硬聚氯乙烯（PVC-U）压埋地排污、排水用管材
本标准参考GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》制定。 本标准与GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》主要技术变化 — 密度由≤1.55g/cm3，改为≤1.6g
Regenerated rigid polyvinyl chloride (PVC-U) non-pressure buried sewage and drainage pipes
ISO 8772:1991 埋地污废水排放用高密度聚乙烯管材和管件 规范
This International Standard specifies requirements for high-density polyethylene (PE-HD) pipes, fittings and joints with nominal outside diameters
High density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems; specifications
T/CPPIA 3-2020 埋地排水排污用抗冲改性聚氯乙烯（PVC-M）双壁波纹管材
8.1 颜色 管材内外层应色泽均匀，颜色一般为蓝色，其他颜色可由供需双方协商确定。 8.2 外观 8.2.1 管材内外壁不允许有气泡、裂口、分解变色线及明显的杂质和不规则波纹。管材内壁应光滑，管材端面应平整并与轴线垂直。 8.2.2 管材波谷区内外壁应紧密熔接，不应出现脱开现象。 8.3
Modified impact resistance poly (vinyl chloride) (PVC-M) double wall corrugated pipes for underground soil waste and drainage
T/CECS 10011-2019 埋地排水用聚乙烯共混聚氯乙烯双壁波纹管材
本标准规定了埋地排水用聚乙烯共混聚氯乙烯双壁波纹管材的术语和符号、材料、分类及标记、要求、试验方法、检验规则和标志、运输、贮存
Polyethylene mixed polyvinyl chloride double wall corrugated pipe for underground sewer
ISO 8772:2006 高压埋地污废水排放用塑料管道系统.聚乙烯管材(PE)
This International Standard specifies the requirements for polyethylene (PE) pipes, fittings and piping systems intended for use for non-pressure
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE)
ISO 8773:1991 埋地污废水排放用聚丙烯管材和管件 规范
This International Standard specifies requirements for polypropylene (PP) homopolymer and copolymer pipes, fittings and joints with nominal outside
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems; specifications
KS M ISO 7073:2005 对安装埋地硬聚氯乙烯(PVC-U)排污、废水管的推荐技术
이 기술보고서는 배수 및 하수용 지름 630 mm까지의 무가소화 폴리염화비닐(PVC-U
Recommended techniques for the installation of unplasticized poly(vinyl chloride)(PVC－U) buried drains and sewers
ISO/TR 7073:1988 对安装埋地硬聚氯乙烯(PVC-U)排污、废水管的推荐技术
Includes recommendations concerning installation of PVC-U-pipes and fittings up to 630 mm diameter, trenchwork, pipe laying and backfilling
Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers
GB/T 18477-2001 埋地排水用硬聚氯乙烯(PVC-U)双壁波纹管材
本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的埋地排水用硬聚氯乙烯(PVC-U)双壁波纹管材（以下简称“管材”）的产品分类、材料、技术要求、试验方法、检验规则和标志、运输、贮存。 本标准适用于市政排水、埋地压农田排水和建筑物外排水用管材。在考虑到材料的耐化学性和耐温性后亦可用
Unplasticized polyvinyl chloride(PVC-U) double wall corrugated pipes for underground soil,waste and drainage
T/SCJC P02-2021 埋地排水用 改性聚氯乙烯（PVMK）双壁波纹管材
7 技术要求 7.1 颜色 管材内外层应色泽均匀，颜色由供需双方协商确定。 7.2 外观 管材内外壁不应有气泡、裂口、分解变色线及明显的杂质和不规则波纹。管材内壁应光滑，管材两端应平整并与轴线垂直。管材波谷区内外壁应紧密熔接，不应出现脱开现象
Modified Polyvinyl Chloride（PVMK）Double Wall corrugated pipe for underground drainage
KS 06-217-1981 肯尼亚埋地排水排污用硬聚氯乙烯管材和配件的标准规格
This standard specifies requirements for unplasticized polyvinyl chloride (UPVC) pipes, fittings and suitable accessories for the construction
KENYA STANDARD SPECIFICATION FOR UNPLASTICIZED PVC PIPES AND FITTINGS FOR BURIED DRAIN AND SEWER
编辑：北检院编辑部
