GB/T 30916-2014 喷涂硬质聚氨酯泡沫组合聚醚
本标准规定了喷涂硬质聚氨酯泡沫组合聚醚(以下简称组合聚醚〉的分类、技术要求、试验方法、检验规则及标志、包装、运输与贮存”本标准适用于由多元醇、泡沐稳定剂、催化剂、阻燃剂(或施工现场添加)和其他助剂任规定的工艺条件一配制而成的组合聚醚
Blend polyol for rigid polyurethane foam used in spraying
HG/T 4961-2016 冰箱、冰柜用聚氨酯硬泡组合聚醚
Polyurethane rigid foam combined with polyether for refrigerators and freezers
HG/T 4395-2012 太阳能热水器用聚氨酯硬泡组合聚醚
本标准规定了太阳能热水器用聚氨酯硬泡组合聚醚的分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等。本标准适用于太阳能热水器用聚氨酯硬泡组合聚醚(以下简称组合聚醚),组合聚醚主要包含:聚醚多元醇、聚酯多元醇、泡沫稳定剂、催化剂、发泡剂和其他助剂等
Blend polyol for rigid polyurethane cellular plastics used in solar water heaters
HG/T 4960-2016 保温板用硬质聚氨酯泡沫组合聚醚
Rigid polyurethane foam combined with polyether for insulation board
HG/T 4960~4961-2016 保温板用硬质聚氨酯泡沫和 冰箱、冰柜用聚氨酯硬泡组合聚醚（2016）
Rigid polyurethane foam for insulation boards and polyurethane rigid foam combination polyether for refrigerators and freezers (2016)
HJ 1057-2019 组合聚醚中HCFC-22、CFC-11和HCFC-141b等消耗臭氧层物质的测定顶空 气相色谱-质谱法
本标准规定了测定组合聚醚中二氟一氯甲烷（HCFC-22）、一氟三氯甲烷（CFC-11）和一氟二氯乙烷（HCFC-141b）等消耗臭氧层物质的顶空/气相色谱-质谱法。 本标准适用于组合聚醚中HCFC-22、CFC-11 和 HCFC-141b 等消耗臭氧层物质的测定
Determination of ozone-depleting substances including HCFC-22, CFC-11 and HCFC-141b in pre-blended polyether polyols-Headspace/gas chromatography-mass spectrometry
HJ 1058-2019 硬质聚氨酯泡沫和组合聚醚中CFC-12、HCFC-22、CFC-11和HCFC-141b等消耗臭氧层物质的测定便携式顶空 气相色谱-质谱法
本标准规定了测定硬质聚氨酯泡沫和组合聚醚中二氟二氯甲烷(CFC-12)、二氟一氯甲烷(HCFC-22)、一氟三氯甲烷(CFC-11)和一氟二氯乙烷(HCFC-141b)等消耗臭氧层物质的便携式顶空/气相色谱-质谱法。 本标准适用于硬质聚氨酯泡沫和组合聚醚中 CFC-12、HCFC-22
Determination of ozone-depleting substances including CFC-12, HCFC-22, CFC011 and HCFC-141b in rigid polyurethane foam and pre-blended polyether polyols-Portable headspace/gas chromatography-mass spectrometry
ASTM F2026-07 外科植入物用聚醚醚酮(PEEK)聚合物的标准规范
1.1 This specification covers polyetheretherketone (PEEK) polymer in virgin forms as supplied by a vendor (pellets, powder, and so forth
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM F2026-07 外科植入物用聚醚醚酮(PEEK)聚合物的标准规范
1.1 This specification covers polyetheretherketone (PEEK) polymer in virgin forms as supplied by a vendor (pellets, powder, and so forth
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM F2026-07e1 外科植入物用聚醚醚酮(PEEK)聚合物的标准规范
1.1 This specification covers polyetheretherketone (PEEK) polymer in virgin forms as supplied by a vendor (pellets, powder, and so forth
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
YY/T 0660-2008 外科植入物用聚醚醚酮(PEEK)聚合物的标准规范
本标准涵盖了由原料供应商提供的PEEK聚合物原料（粒料、粉料等）。本标准提供了当这些热塑性塑料制造用于人体的植入器械，诸如外科植入物、外科或牙科器械的部件时的要求和相关的试验方法。 任何一种材料，生产部件或器械时的加工技术（例如模塑、挤出、机加工、装配、灭菌等）均可改变其性能。这些聚合物成品的性能
Standard specification for polyetheretherketone (PEEK) polymers for surgical implant applications
ASTM F2026-08 外科植入物用聚醚醚酮(PEEK)聚合物的标准规范
1.1 This specification covers polyetheretherketone (PEEK) polymer in virgin forms as supplied by a vendor (pellets, powder, and so
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM F2026-12 外科植入物用聚醚醚酮 (PEEK) 聚合物的标准规范
1.1 This specification covers polyetheretherketone (PEEK) polymer in virgin forms
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM F2820-12 外科植入物用聚醚醚酮 (PEEK) 聚合物的标准规范
1.1 This specification covers virgin polyetherketoneketone (PEKK) polymer resin as supplied by a vendor (for example, in pellets
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
ASTM F2820-12(2021)e1 外科植入物用聚醚醚酮 (PEEK) 聚合物的标准规范
1.1?This specification covers virgin polyetherketoneketone (PEKK) polymer resin as supplied by a vendor (for example, in pellets, powder
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
GB/T 30916-2014 喷涂硬质聚氨酯泡沫组合聚醚
本标准规定了喷涂硬质聚氨酯泡沫组合聚醚(以下简称组合聚醚〉的分类、技术要求、试验方法、检验规则及标志、包装、运输与贮存”本标准适用于由多元醇、泡沐稳定剂、催化剂、阻燃剂(或施工现场添加)和其他助剂任规定的工艺条件一配制而成的组合聚醚
Blend polyol for rigid polyurethane foam used in spraying
HG/T 4961-2016 冰箱、冰柜用聚氨酯硬泡组合聚醚
Polyurethane rigid foam combined with polyether for refrigerators and freezers
HG/T 4395-2012 太阳能热水器用聚氨酯硬泡组合聚醚
本标准规定了太阳能热水器用聚氨酯硬泡组合聚醚的分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存等。本标准适用于太阳能热水器用聚氨酯硬泡组合聚醚(以下简称组合聚醚),组合聚醚主要包含:聚醚多元醇、聚酯多元醇、泡沫稳定剂、催化剂、发泡剂和其他助剂等
Blend polyol for rigid polyurethane cellular plastics used in solar water heaters
HG/T 4960-2016 保温板用硬质聚氨酯泡沫组合聚醚
Rigid polyurethane foam combined with polyether for insulation board
HG/T 4960~4961-2016 保温板用硬质聚氨酯泡沫和 冰箱、冰柜用聚氨酯硬泡组合聚醚（2016）
Rigid polyurethane foam for insulation boards and polyurethane rigid foam combination polyether for refrigerators and freezers (2016)
HJ 1057-2019 组合聚醚中HCFC-22、CFC-11和HCFC-141b等消耗臭氧层物质的测定顶空 气相色谱-质谱法
本标准规定了测定组合聚醚中二氟一氯甲烷（HCFC-22）、一氟三氯甲烷（CFC-11）和一氟二氯乙烷（HCFC-141b）等消耗臭氧层物质的顶空/气相色谱-质谱法。 本标准适用于组合聚醚中HCFC-22、CFC-11 和 HCFC-141b 等消耗臭氧层物质的测定
Determination of ozone-depleting substances including HCFC-22, CFC-11 and HCFC-141b in pre-blended polyether polyols-Headspace/gas chromatography-mass spectrometry
HJ 1058-2019 硬质聚氨酯泡沫和组合聚醚中CFC-12、HCFC-22、CFC-11和HCFC-141b等消耗臭氧层物质的测定便携式顶空 气相色谱-质谱法
本标准规定了测定硬质聚氨酯泡沫和组合聚醚中二氟二氯甲烷(CFC-12)、二氟一氯甲烷(HCFC-22)、一氟三氯甲烷(CFC-11)和一氟二氯乙烷(HCFC-141b)等消耗臭氧层物质的便携式顶空/气相色谱-质谱法。 本标准适用于硬质聚氨酯泡沫和组合聚醚中 CFC-12、HCFC-22
Determination of ozone-depleting substances including CFC-12, HCFC-22, CFC011 and HCFC-141b in rigid polyurethane foam and pre-blended polyether polyols-Portable headspace/gas chromatography-mass spectrometry
ASTM F2026-07 外科植入物用聚醚醚酮(PEEK)聚合物的标准规范
1.1 This specification covers polyetheretherketone (PEEK) polymer in virgin forms as supplied by a vendor (pellets, powder, and so forth
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM F2026-07 外科植入物用聚醚醚酮(PEEK)聚合物的标准规范
1.1 This specification covers polyetheretherketone (PEEK) polymer in virgin forms as supplied by a vendor (pellets, powder, and so forth
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM F2026-07e1 外科植入物用聚醚醚酮(PEEK)聚合物的标准规范
1.1 This specification covers polyetheretherketone (PEEK) polymer in virgin forms as supplied by a vendor (pellets, powder, and so forth
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
YY/T 0660-2008 外科植入物用聚醚醚酮(PEEK)聚合物的标准规范
本标准涵盖了由原料供应商提供的PEEK聚合物原料（粒料、粉料等）。本标准提供了当这些热塑性塑料制造用于人体的植入器械，诸如外科植入物、外科或牙科器械的部件时的要求和相关的试验方法。 任何一种材料，生产部件或器械时的加工技术（例如模塑、挤出、机加工、装配、灭菌等）均可改变其性能。这些聚合物成品的性能
Standard specification for polyetheretherketone (PEEK) polymers for surgical implant applications
ASTM F2026-08 外科植入物用聚醚醚酮(PEEK)聚合物的标准规范
1.1 This specification covers polyetheretherketone (PEEK) polymer in virgin forms as supplied by a vendor (pellets, powder, and so
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM F2026-12 外科植入物用聚醚醚酮 (PEEK) 聚合物的标准规范
1.1 This specification covers polyetheretherketone (PEEK) polymer in virgin forms
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM F2820-12 外科植入物用聚醚醚酮 (PEEK) 聚合物的标准规范
1.1 This specification covers virgin polyetherketoneketone (PEKK) polymer resin as supplied by a vendor (for example, in pellets
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
ASTM F2820-12(2021)e1 外科植入物用聚醚醚酮 (PEEK) 聚合物的标准规范
1.1?This specification covers virgin polyetherketoneketone (PEKK) polymer resin as supplied by a vendor (for example, in pellets, powder
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
编辑：北检院编辑部
