不锈钢和合金检测

GB/T 32255-2015 高温承压马氏体不锈钢和合金钢通用铸件

本标准规定了高温承压马氏体不锈钢和合金钢通用铸件的技术要求、试验方法、检验规则、标志、贮存、包装和运输等要求。 本标准适用于工作温度不高于600℃条件下使用的铸造阀门、法兰、管件，其他高温承压铸件可参考使用

General martensitic stainless steel and alloy steel castings suitable for high temperature and high pressure service

ASTM A217/A217M-14 高温用承压部件马氏体不锈钢和合金钢铸件标准规格

1.1 This specification² covers

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A217/A217M-12 适用于高温设备的承压部件钢铸件、马氏体不锈钢和合金钢的标准规格

1.1 This specification

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

RWMA BULL 15 不锈钢和高合金钢的电阻焊

Resistance Welding of Stainless and High-Alloy Steels

RWMA BULLETIN 15 不锈钢和高合金钢的电阻焊

Resistance Welding of Stainless and High-Alloy Steels

ASTM A217/A217M-10 适合高温受压部件用的马氏体不锈钢和合金钢铸件标准规范

1.1 This specification covers martensitic stainless steel and alloy steel castings for valves, flanges, fittings, and other

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A217/A217M-11 适用于高温设施的含压力部件钢铸件,马氏体不锈钢和合金钢的标准规范

1.1 This specification covers martensitic stainless steel and alloy steel castings for valves, flanges, fittings, and other

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A437/A437M-10 高温用经特殊处理的不锈钢和合金钢涡轮机型螺栓标准规范

1.1 This specification covers stainless and alloy-steel bolting specially heat treated for high-temperature service, such as steam

Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

ASTM E2465-06 用X射线荧光光谱测定法分析不锈钢和合金钢的标准试验方法

1.1 This test method covers the analysis of Ni-base alloys by wavelength dispersive X-ray Fluorescence Spectrometry for the determination

Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry

ASTM E572-02a(2006)e2 用X射线荧光光谱测定法分析不锈钢和合金钢的标准试验方法

This procedure is suitable for manufacturing control and for verifying that the product meets specifications. It provides rapid

Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry

ASTM A437/A437M-11 高温设施用特殊热处理不锈钢和合金钢涡轮式螺栓的标准规范

1.1 This specification covers stainless and alloy-steel bolting specially heat treated for high-temperature service, such as steam

Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

ASTM A437/A437M-12 高温设施用特殊热处理不锈钢和合金钢涡轮式螺栓的标准规格

1.1 This specification covers stainless and alloy-steel bolting specially heat treated for high-temperature service, such as steam

Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

ASTM A217/A217M-22 高温设备用承压部件用马氏体不锈钢和合金钢铸件的标准规范

1.1 This specification2 covers martensitic stainless steel and alloy steel castings for valves, flanges, fittings, and other pressure-containing parts

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A437/A437M-04 高温设备用特殊热处理的不锈钢和合金钢涡轮型螺栓的标准规范

1.1 This specification covers alloy-steel bolting material specially heat treated for high-temperature service, such as steam turbine, gas turbine

Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service

ASTM A437/A437M-00 高温设备用特殊热处理的不锈钢和合金钢涡轮型螺栓的标准规范

1.1 This specification covers alloy-steel bolting material specially heat treated for high-temperature service, such as steam turbine, gas turbine

Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service

GB/T 32255-2015 高温承压马氏体不锈钢和合金钢通用铸件

本标准规定了高温承压马氏体不锈钢和合金钢通用铸件的技术要求、试验方法、检验规则、标志、贮存、包装和运输等要求。 本标准适用于工作温度不高于600℃条件下使用的铸造阀门、法兰、管件，其他高温承压铸件可参考使用

General martensitic stainless steel and alloy steel castings suitable for high temperature and high pressure service

ASTM A217/A217M-14 高温用承压部件马氏体不锈钢和合金钢铸件标准规格

1.1 This specification² covers

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A217/A217M-12 适用于高温设备的承压部件钢铸件、马氏体不锈钢和合金钢的标准规格

1.1 This specification

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

RWMA BULL 15 不锈钢和高合金钢的电阻焊

Resistance Welding of Stainless and High-Alloy Steels

RWMA BULLETIN 15 不锈钢和高合金钢的电阻焊

Resistance Welding of Stainless and High-Alloy Steels

ASTM A217/A217M-10 适合高温受压部件用的马氏体不锈钢和合金钢铸件标准规范

1.1 This specification covers martensitic stainless steel and alloy steel castings for valves, flanges, fittings, and other

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A217/A217M-11 适用于高温设施的含压力部件钢铸件,马氏体不锈钢和合金钢的标准规范

1.1 This specification covers martensitic stainless steel and alloy steel castings for valves, flanges, fittings, and other

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A437/A437M-10 高温用经特殊处理的不锈钢和合金钢涡轮机型螺栓标准规范

1.1 This specification covers stainless and alloy-steel bolting specially heat treated for high-temperature service, such as steam

Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

ASTM E2465-06 用X射线荧光光谱测定法分析不锈钢和合金钢的标准试验方法

1.1 This test method covers the analysis of Ni-base alloys by wavelength dispersive X-ray Fluorescence Spectrometry for the determination

Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry

ASTM E572-02a(2006)e2 用X射线荧光光谱测定法分析不锈钢和合金钢的标准试验方法

This procedure is suitable for manufacturing control and for verifying that the product meets specifications. It provides rapid

Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry

ASTM A437/A437M-11 高温设施用特殊热处理不锈钢和合金钢涡轮式螺栓的标准规范

1.1 This specification covers stainless and alloy-steel bolting specially heat treated for high-temperature service, such as steam

Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

ASTM A437/A437M-12 高温设施用特殊热处理不锈钢和合金钢涡轮式螺栓的标准规格

1.1 This specification covers stainless and alloy-steel bolting specially heat treated for high-temperature service, such as steam

Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

ASTM A217/A217M-22 高温设备用承压部件用马氏体不锈钢和合金钢铸件的标准规范

1.1 This specification2 covers martensitic stainless steel and alloy steel castings for valves, flanges, fittings, and other pressure-containing parts

Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

ASTM A437/A437M-04 高温设备用特殊热处理的不锈钢和合金钢涡轮型螺栓的标准规范

1.1 This specification covers alloy-steel bolting material specially heat treated for high-temperature service, such as steam turbine, gas turbine

Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service

ASTM A437/A437M-00 高温设备用特殊热处理的不锈钢和合金钢涡轮型螺栓的标准规范

1.1 This specification covers alloy-steel bolting material specially heat treated for high-temperature service, such as steam turbine, gas turbine

Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service