聚四氟乙烯乳液涂覆玻璃纤维布检测

JC/T 171.2-2008 涂覆玻璃纤维布.第2部分:聚四氟乙烯乳液涂覆玻璃纤维布:

本标准规定了聚四氟乙烯乳液涂覆玻璃纤维布（以下简称四氟布）的代号、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以玻璃纤维布为基材经涂覆聚四氟乙烯乳液而成的制品。主要用于建筑膜结构材料（TFS）、非金属补偿器（FEJ）、防粘输送带（CB）、防粘耐热衬垫（FHS）、包覆布（CF）等

Coated glassfiber woven.Part 2: PTFE emulation coated glass woven

JC/T 171.2-2019 涂覆玻璃纤维布 第2部分:聚四氟乙烯乳液涂覆玻璃纤维布

Coated fiberglass cloth Part 2: PTFE emulsion coated fiberglass cloth

ASTM D4969-17 聚四氟乙烯标准规范&x2013(聚四氟乙烯（PTFE）涂层玻璃纤维

1.1 This specification covers glass fabric impregnated, coated, and sintered on both sides with PTFE to a nominal thickness of 0.318 mm (0.015 in.

Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric

ASTM D4969-97 聚四氟乙烯(PTFE)涂覆玻璃布的标准规范

1.1 This specification covers glass fabric coated on both sides with PTFE.

1.2 The PTFE-coated glass fabric is for electrical, chemical

Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric

ASTM D496-74(1995 聚四氟乙烯(PTFE)涂覆玻璃布的标准规范

l.l This specification cover.; chip soap suitable for washing, cleaning, and scouring purposes with soft water, when the presence of alkaline salts

Standard specification for polytetrafluoroethylene (PTFE) coated glass cloth

DLA A-A-59300 VALID NOTICE 2-2009 绝缘胶带，非粘性，玻璃纤维布，聚四氟乙烯涂层

Insulation Tape, Nonadhering, Glass Fabric,Polytetrafluoroethylene Coated

ASTM D4969-02 聚四氟乙烯和8212的标准规范(聚四氟乙烯（PTFE）涂层玻璃纤维

1.1 This specification covers glass fabric impregnated, coated, and sintered on both sides with PTFE to a nominal thickness of 0.318 mm (0.015 in.

Standard Specification for Polytetrafluoroethylene—(PTFE) Coated Glass Fabric

SAE AMS3666C-1985 聚四氟乙烯（PTFE）板材 玻璃纤维增强

Form: This specification covers glass-cloth-reinforced polytetrafluoro-ethylene (PTFE) resin in the form of sheet. Application: Primarily

Polytetrafluoroethylene (PTFE) Sheet@ Glass Fabric Reinforced

HB 5478-1991 脱模用聚四氟乙烯／玻璃布

本标准规定了脱模用聚四氟乙烯／玻璃布（以下简称脱模布）的技术要求、试验方法、检验规则等。 　　本标准适用于成型复合材料制件时脱模用的玻璃布，其最高使用温度定为２５０

PTFE/glass cloth for mold release

SAE AMS3666B-1978 聚四氟乙烯板 玻璃布增强

Form: This specification covers glass-fabric-reinforced polytetrafluoroethylene resin in the form of sheet. Application: Primarily for electrical

Polytetrafluoroethylene Sheet@ Glass Fabric Reinforced

SAE AMS3666-1964 聚四氟乙烯板 玻璃布增强

APPLICATION: Primarily for electrical@ electronic@ and mechanical applications requiring a composite having the high strength and nondeforming

Polytetrafluoroethylene Sheet@ Glass Fabric Reinforced

SAE AMS3666A-1976 聚四氟乙烯板 玻璃布增强

Form: This specification covers glass-fabric-reinforced polytetrafluoroethylene resing in the form of sheet. Application: Primarily for electrical

Polytetrafluoroethylene Sheet@ Glass Fabric Reinforced

SAE AMS3756B-2008 烧结的25玻璃、75%聚四氟乙烯(PTFE)树脂、玻璃纤维填充的聚四氟乙烯模塑制品

1.1 FormThis specification covers one grade of glass-fiber-filled polytetrafluoroethylene (PTFE) in the form of molded billets.1.2

Moldings, Glass Fiber Filled Polytetrafluoroethylene, 75% PTFE Resin, 25 Glass, As Sintered

ASTM D4969-07 聚四氟乙烯(PTFE)涂覆玻璃织物的标准规范

1.1 This specification covers glass fabric impregnated, coated, and sintered on both sides with PTFE to a nominal thickness of 0.318 mm (0.015 in.

Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric

ASTM D4969-07(2012 聚四氟乙烯(PTFE)涂覆玻璃织物的标准规格

1.1 This specification covers glass fabric impregnated, coated, and sintered on both sides with PTFE to a nominal thickness of 0.318 mm

Standard Specification for Polytetrafluoroethylenendash;(PTFE) Coated Glass Fabric

JC/T 171.2-2008 涂覆玻璃纤维布.第2部分:聚四氟乙烯乳液涂覆玻璃纤维布:

本标准规定了聚四氟乙烯乳液涂覆玻璃纤维布（以下简称四氟布）的代号、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以玻璃纤维布为基材经涂覆聚四氟乙烯乳液而成的制品。主要用于建筑膜结构材料（TFS）、非金属补偿器（FEJ）、防粘输送带（CB）、防粘耐热衬垫（FHS）、包覆布（CF）等

Coated glassfiber woven.Part 2: PTFE emulation coated glass woven

JC/T 171.2-2019 涂覆玻璃纤维布 第2部分:聚四氟乙烯乳液涂覆玻璃纤维布

Coated fiberglass cloth Part 2: PTFE emulsion coated fiberglass cloth

ASTM D4969-17 聚四氟乙烯标准规范&x2013(聚四氟乙烯（PTFE）涂层玻璃纤维

1.1 This specification covers glass fabric impregnated, coated, and sintered on both sides with PTFE to a nominal thickness of 0.318 mm (0.015 in.

Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric

ASTM D4969-97 聚四氟乙烯(PTFE)涂覆玻璃布的标准规范

1.1 This specification covers glass fabric coated on both sides with PTFE.

1.2 The PTFE-coated glass fabric is for electrical, chemical

Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric

ASTM D496-74(1995 聚四氟乙烯(PTFE)涂覆玻璃布的标准规范

l.l This specification cover.; chip soap suitable for washing, cleaning, and scouring purposes with soft water, when the presence of alkaline salts

Standard specification for polytetrafluoroethylene (PTFE) coated glass cloth

DLA A-A-59300 VALID NOTICE 2-2009 绝缘胶带，非粘性，玻璃纤维布，聚四氟乙烯涂层

Insulation Tape, Nonadhering, Glass Fabric,Polytetrafluoroethylene Coated

ASTM D4969-02 聚四氟乙烯和8212的标准规范(聚四氟乙烯（PTFE）涂层玻璃纤维

1.1 This specification covers glass fabric impregnated, coated, and sintered on both sides with PTFE to a nominal thickness of 0.318 mm (0.015 in.

Standard Specification for Polytetrafluoroethylene—(PTFE) Coated Glass Fabric

SAE AMS3666C-1985 聚四氟乙烯（PTFE）板材 玻璃纤维增强

Form: This specification covers glass-cloth-reinforced polytetrafluoro-ethylene (PTFE) resin in the form of sheet. Application: Primarily

Polytetrafluoroethylene (PTFE) Sheet@ Glass Fabric Reinforced

HB 5478-1991 脱模用聚四氟乙烯／玻璃布

本标准规定了脱模用聚四氟乙烯／玻璃布（以下简称脱模布）的技术要求、试验方法、检验规则等。 　　本标准适用于成型复合材料制件时脱模用的玻璃布，其最高使用温度定为２５０

PTFE/glass cloth for mold release

SAE AMS3666B-1978 聚四氟乙烯板 玻璃布增强

Form: This specification covers glass-fabric-reinforced polytetrafluoroethylene resin in the form of sheet. Application: Primarily for electrical

Polytetrafluoroethylene Sheet@ Glass Fabric Reinforced

SAE AMS3666-1964 聚四氟乙烯板 玻璃布增强

APPLICATION: Primarily for electrical@ electronic@ and mechanical applications requiring a composite having the high strength and nondeforming

Polytetrafluoroethylene Sheet@ Glass Fabric Reinforced

SAE AMS3666A-1976 聚四氟乙烯板 玻璃布增强

Form: This specification covers glass-fabric-reinforced polytetrafluoroethylene resing in the form of sheet. Application: Primarily for electrical

Polytetrafluoroethylene Sheet@ Glass Fabric Reinforced

SAE AMS3756B-2008 烧结的25玻璃、75%聚四氟乙烯(PTFE)树脂、玻璃纤维填充的聚四氟乙烯模塑制品

1.1 FormThis specification covers one grade of glass-fiber-filled polytetrafluoroethylene (PTFE) in the form of molded billets.1.2

Moldings, Glass Fiber Filled Polytetrafluoroethylene, 75% PTFE Resin, 25 Glass, As Sintered

ASTM D4969-07 聚四氟乙烯(PTFE)涂覆玻璃织物的标准规范

1.1 This specification covers glass fabric impregnated, coated, and sintered on both sides with PTFE to a nominal thickness of 0.318 mm (0.015 in.

Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric

ASTM D4969-07(2012 聚四氟乙烯(PTFE)涂覆玻璃织物的标准规格

1.1 This specification covers glass fabric impregnated, coated, and sintered on both sides with PTFE to a nominal thickness of 0.318 mm

Standard Specification for Polytetrafluoroethylenendash;(PTFE) Coated Glass Fabric