NB/T 51024-2014 固体充填材料多孔底卸式刮板输送机技 术条件
本标准规定了固体充填材料多孔底卸式刮板输送机(以下简称充填输送机)的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适应于综合机械化固体充填采煤技术中固体充填材料多孔底卸式刮板输送机
Technology of solid backfilling materials porous bottom unloading conveyor type
REG NASA-LLIS-0344--1994 经验教训 固体推进剂与多孔材料接触，着火
Lessons Learned - Solid Propellant in Contact with Porous Material, Fire
DIN 53428:2017 多孔材料的测试 测定对液体、蒸汽、气体和固体材料的耐受性
Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials
DIN 53428:2022-11 多孔材料的测试 测定对液体、蒸汽、气体和固体材料的耐受性
Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials / Note: Date of issue 2022-10-14*Intended as replacement for DIN 53428 (2017-08).
DIN 53428:2017-08 多孔材料的测试 测定对液体、蒸汽、气体和固体材料的耐受性
Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials / Note: To be replaced by DIN 53428 (2022-11).
DIN 53428:2023-09 多孔材料的测试 测定对液体、蒸汽、气体和固体材料的耐受性
Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials
QB/T 2667.2-2004 埋地通信用多孔一体塑料管材 第2部分:聚乙烯(PE)多孔一体管材
部分规定了以聚乙烯树脂为主要原料，经挤出成型的埋地通信用多孔一体塑料管材——聚乙烯多孔一体管材(以下简称"管材" )的产品分类、要求、试验方法、检验规则及标志、包装、运输、贮存。 部分适用于室外埋地通信电缆和光缆的管道系统
Buried multi-hole plastics pipes for communication Part 1: Polyethylene (PE) multi-hole pipes
QB/T 2667.1-2004 埋地通信用多孔一体塑料管材 第1部分:硬聚氯乙烯(PVC-U)多孔一体管材
本部分规定了以聚氯乙烯为主要原料，经挤出成型的埋地通信用多孔一体塑料管材一-硬聚氯乙烯多孔一体管材的产品分类、要求、试验方法、检验规则和标志、运输、贮存。 本部分适用于室外埋地通信电缆和光缆的管道系统
Buried multi-hole plastics pipes for communication Part 1: Unplasticsized polyvinyl chloride (PVC-U) multi-hole pipes
ASTM UOP964-98 多孔材料的比表面积、孔体积、平均孔径和孔径分布
This method is for determining the surface area (SA), total pore volume (PV), average pore diameter (PD), and pore diameter distribution from 1
Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM UOP964-11 氮气吸附多孔材料的表面积、孔体积、平均孔径和孔径分布
This method is for determining the surface area (SA), total pore volume (PV), average pore diameter (PD), and pore size distribution from 2
Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
UOP 964-2011 氮气吸附多孔材料的表面积、孔体积、平均孔径和孔径分布
Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
JIS A 9510:2021 机多孔绝热材料
lnorganic porous thermal insulation materials
T/CSTM 00553-2022 轻质多孔材料孔隙率测定方法
本文件规定了轻质多孔材料孔隙率测定中涉及的术语和定义、方法提要、仪器、样品制备、试验环境、试验步骤、结果计算。 本文件适用于机轻质多孔材料孔隙率的测定
Method for determination of porosity of lightweight porous material
JIS A 9510:2009 机的多孔隔热材料
This Japanese Industrial Standard specifies the inorganic porous thermal insula¬tion boards (hereafter referred to as "board insulation
Inorganic porous thermal insulation materials
GM GM6098M-1998 弹性多孔的尿烷材料
Flexible Cellular Urethane Materials
NB/T 51024-2014 固体充填材料多孔底卸式刮板输送机技 术条件
本标准规定了固体充填材料多孔底卸式刮板输送机(以下简称充填输送机)的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适应于综合机械化固体充填采煤技术中固体充填材料多孔底卸式刮板输送机
Technology of solid backfilling materials porous bottom unloading conveyor type
REG NASA-LLIS-0344--1994 经验教训 固体推进剂与多孔材料接触，着火
Lessons Learned - Solid Propellant in Contact with Porous Material, Fire
DIN 53428:2017 多孔材料的测试 测定对液体、蒸汽、气体和固体材料的耐受性
Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials
DIN 53428:2017-08 多孔材料的测试 测定对液体、蒸汽、气体和固体材料的耐受性
Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials / Note: To be replaced by DIN 53428 (2022-11).
DIN 53428:2022-11 多孔材料的测试 测定对液体、蒸汽、气体和固体材料的耐受性
Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials / Note: Date of issue 2022-10-14*Intended as replacement for DIN 53428 (2017-08).
DIN 53428:2023-09 多孔材料的测试 测定对液体、蒸汽、气体和固体材料的耐受性
Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials
QB/T 2667.2-2004 埋地通信用多孔一体塑料管材 第2部分:聚乙烯(PE)多孔一体管材
部分规定了以聚乙烯树脂为主要原料，经挤出成型的埋地通信用多孔一体塑料管材——聚乙烯多孔一体管材(以下简称"管材" )的产品分类、要求、试验方法、检验规则及标志、包装、运输、贮存。 部分适用于室外埋地通信电缆和光缆的管道系统
Buried multi-hole plastics pipes for communication Part 1: Polyethylene (PE) multi-hole pipes
QB/T 2667.1-2004 埋地通信用多孔一体塑料管材 第1部分:硬聚氯乙烯(PVC-U)多孔一体管材
本部分规定了以聚氯乙烯为主要原料，经挤出成型的埋地通信用多孔一体塑料管材一-硬聚氯乙烯多孔一体管材的产品分类、要求、试验方法、检验规则和标志、运输、贮存。 本部分适用于室外埋地通信电缆和光缆的管道系统
Buried multi-hole plastics pipes for communication Part 1: Unplasticsized polyvinyl chloride (PVC-U) multi-hole pipes
ASTM UOP964-98 多孔材料的比表面积、孔体积、平均孔径和孔径分布
This method is for determining the surface area (SA), total pore volume (PV), average pore diameter (PD), and pore diameter distribution from 1
Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM UOP964-11 氮气吸附多孔材料的表面积、孔体积、平均孔径和孔径分布
This method is for determining the surface area (SA), total pore volume (PV), average pore diameter (PD), and pore size distribution from 2
Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
UOP 964-2011 氮气吸附多孔材料的表面积、孔体积、平均孔径和孔径分布
Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
JIS A 9510:2021 机多孔绝热材料
lnorganic porous thermal insulation materials
T/CSTM 00553-2022 轻质多孔材料孔隙率测定方法
本文件规定了轻质多孔材料孔隙率测定中涉及的术语和定义、方法提要、仪器、样品制备、试验环境、试验步骤、结果计算。 本文件适用于机轻质多孔材料孔隙率的测定
Method for determination of porosity of lightweight porous material
JIS A 9510:2009 机的多孔隔热材料
This Japanese Industrial Standard specifies the inorganic porous thermal insula¬tion boards (hereafter referred to as "board insulation
Inorganic porous thermal insulation materials
GM GM6098M-1998 弹性多孔的尿烷材料
Flexible Cellular Urethane Materials
编辑：北检院编辑部
