JB/T 10006-1999 内测千分尺
本标准规定了内测千分尺的型式和尺寸，技术要求，标志与包装等。 本标准适用于分度值为 0.01mm、测微螺杆螺距为 0.5mm 和量程为 25mm、测量范围至 150mm 的内测千分尺
Inside micrometer
JB/T 10006-2018 内测千分尺
Internal measuring micrometer
JJF 1091-2002 测量内尺寸千分尺校准规范
本规范适用于分度值为0.01mm，测量范围为（5～150）mm的内测千分尺及分度值为0.005mm、0.01mm，测量范围为（6～200）mm的孔径千分尺（三爪内径千分尺）的校准
Calibration Specification for Micrometers for Measuring Inside Dimension
JJF 1411-2013 测量内尺寸千分尺校准规范
本规范适用于分度值为0. 01 mm测量范围上限至150 mm的内测千分尺,分度值为0.001 mm、0.002 mm、0. 005 mm测量范围上限至300mm的三点内径千分尺,分辨力为0.001 mm测量范围上限至200 mm的电子数显内测千分尺以及分辨力为0. 001 mm测量范围上限至300
Calibration Specification for Micrometers of Measuring Inside Dimension
NF E11-090:1993 测量仪表 内、外千分尺 专门设计
Measuring instruments. External and internal micrometers. Special design.
NF E11-099:2021 长度测量仪器 带 3 个轴的内径千分尺 规范 测试方法
Length measuring instruments - Internal micrometers with 3 spindles - Specifications - Test methods
ISO/CD 5059-1 几何产品规范（GPS）“尺寸测量设备：内径千分尺”第1部分：两点内径千分尺“设计和计量特性
Geometrical product specifications (GPS) — Dimensional measuring equipment: inside micrometers — Part 1: Two-point inside micrometers — Design and metrological characteristics
GB/T 8177-1987 内径千分尺
本标准适用于分度值为0.01mm，测微螺杆量程为13.25和50mm测量范围为50～5000mm的内径千分尺
Internal micrometers
BS 959:2008 内径千分尺(包括杆式千分尺)规范
This standard specifies requirements for internal micrometers comprising a measuring head, extension rods with or without spacing collars
Specification for internal micrometers (including stick micrometers)
BS 959:1950 内径千分尺(包括杆式千分尺)规范
Micrometers comprising a measuring head, extension rods with or without spacing collars, handle (in smaller sizes). Three sizes of measuring head
Specification for internal micrometers (including stick micrometers)
BS 959:2008(2014 内径千分尺（包括棒式千分尺）规范
Specification for internal micrometers (including stick micrometers)
GB/T 8177-2004 两点内径千分尺
本标准规定了两点内径千分尺（包括“内径千分尺”和“单杆式内径千分尺”）的术语和定义、型式与基本参数、要求、检验方法和标志与包装等。 本标准适用于分度值为0.01mm、0.001mm、0.002mm、0.005mm，测微螺杆的螺距为0.5mm或1.0mm，测量上限ιmax不应
Internal micrometers with two-point contact
GB/T 6314-2018 三爪内径千分尺
Internal micrometer with three-point contact
GB/T 6314-2004 三爪内径千分尺
本标准规定了三爪内径千分尺的术语和定义、型式与基本参数、要求、检验方法和标志与包装等。 本标准适用于分度值为0.01mm，0.001mm，0.002mm，0.005mm，测量上限ιmax不应大于300mm的三爪内径千分尺
Internal micrometers with three--point contact
AS 2101:1978 内部千分尺(包括杆式千分尺)(米制系列)
Specifies internal micrometers and stick micrometers reading to 0.01 mm and gives requirements for materials, properties, basic design details
Internal micrometers (including stick micrometers) (metric series)
JB/T 10006-1999 内测千分尺
本标准规定了内测千分尺的型式和尺寸，技术要求，标志与包装等。 本标准适用于分度值为 0.01mm、测微螺杆螺距为 0.5mm 和量程为 25mm、测量范围至 150mm 的内测千分尺
Inside micrometer
JB/T 10006-2018 内测千分尺
Internal measuring micrometer
JJF 1091-2002 测量内尺寸千分尺校准规范
本规范适用于分度值为0.01mm，测量范围为（5～150）mm的内测千分尺及分度值为0.005mm、0.01mm，测量范围为（6～200）mm的孔径千分尺（三爪内径千分尺）的校准
Calibration Specification for Micrometers for Measuring Inside Dimension
JJF 1411-2013 测量内尺寸千分尺校准规范
本规范适用于分度值为0. 01 mm测量范围上限至150 mm的内测千分尺,分度值为0.001 mm、0.002 mm、0. 005 mm测量范围上限至300mm的三点内径千分尺,分辨力为0.001 mm测量范围上限至200 mm的电子数显内测千分尺以及分辨力为0. 001 mm测量范围上限至300
Calibration Specification for Micrometers of Measuring Inside Dimension
NF E11-090:1993 测量仪表 内、外千分尺 专门设计
Measuring instruments. External and internal micrometers. Special design.
NF E11-099:2021 长度测量仪器 带 3 个轴的内径千分尺 规范 测试方法
Length measuring instruments - Internal micrometers with 3 spindles - Specifications - Test methods
ISO/CD 5059-1 几何产品规范（GPS）“尺寸测量设备：内径千分尺”第1部分：两点内径千分尺“设计和计量特性
Geometrical product specifications (GPS) — Dimensional measuring equipment: inside micrometers — Part 1: Two-point inside micrometers — Design and metrological characteristics
GB/T 8177-1987 内径千分尺
本标准适用于分度值为0.01mm，测微螺杆量程为13.25和50mm测量范围为50～5000mm的内径千分尺
Internal micrometers
BS 959:2008 内径千分尺(包括杆式千分尺)规范
This standard specifies requirements for internal micrometers comprising a measuring head, extension rods with or without spacing collars
Specification for internal micrometers (including stick micrometers)
BS 959:1950 内径千分尺(包括杆式千分尺)规范
Micrometers comprising a measuring head, extension rods with or without spacing collars, handle (in smaller sizes). Three sizes of measuring head
Specification for internal micrometers (including stick micrometers)
BS 959:2008(2014 内径千分尺（包括棒式千分尺）规范
Specification for internal micrometers (including stick micrometers)
GB/T 8177-2004 两点内径千分尺
本标准规定了两点内径千分尺（包括“内径千分尺”和“单杆式内径千分尺”）的术语和定义、型式与基本参数、要求、检验方法和标志与包装等。 本标准适用于分度值为0.01mm、0.001mm、0.002mm、0.005mm，测微螺杆的螺距为0.5mm或1.0mm，测量上限ιmax不应
Internal micrometers with two-point contact
GB/T 6314-2018 三爪内径千分尺
Internal micrometer with three-point contact
GB/T 6314-2004 三爪内径千分尺
本标准规定了三爪内径千分尺的术语和定义、型式与基本参数、要求、检验方法和标志与包装等。 本标准适用于分度值为0.01mm，0.001mm，0.002mm，0.005mm，测量上限ιmax不应大于300mm的三爪内径千分尺
Internal micrometers with three--point contact
AS 2101:1978 内部千分尺(包括杆式千分尺)(米制系列)
Specifies internal micrometers and stick micrometers reading to 0.01 mm and gives requirements for materials, properties, basic design details
Internal micrometers (including stick micrometers) (metric series)
编辑：北检院编辑部
