0 燃气用埋地聚乙烯管件
本标准规定了以聚乙烯树脂为主要原料，经注塑成型的燃气用埋地聚乙烯管件（以下简称管件）的技术要求、规格尺寸、试验方法、检验规则、标志、包装、运输、贮存及管件品种。此外还规定了原料的主要性能要求。 本标准适用于工作温度为-20～40℃、最大工作压力不大于0.4MPa的埋地输送燃气的管件。管
NF T54-072:1981 塑料制品.“5”聚乙烯管件.规范
Polyethylene pipes "5". Specifications.
KS M 3515-1995 供应气体燃料的聚乙烯管件
Polyethylene pipes-fittings for the supply of gaseous fuels
GOST R 52779-2007 输气管道用聚乙烯管件.通用规范
Polyethylene fittings for gas pipelines. General specifications
ANSI/ASTM D2683:2020 外径受控聚乙烯管材用承插式聚乙烯管件的标准规范
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
AS 1460.1:1989 聚乙烯管件使用.第1部分:机械连接管件
This Standard specifies requirements for mechanical jointing fittings suitable for use with polyethylene pipes manufactured in accordance with AS 1159
Fittings for use with polyethylene pipes Part 1: Mechanical jointing fittings
NF T54-085:1988 塑料制品.承压管道用网状聚乙烯管件.规范
Plastics. Reticulate polyethylene pipes for pipelines under pressure. Specifications.
FORD ESE-M2D289-A-2004 氯化聚乙烯管件***与标准FORD WSS-M99P1111-A一起使用***
TUBING, CHLORINATED POLYETHYLENE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D289-A-2009 氯化聚乙烯管件***与标准FORD WSS-M99P1111-A一起使用***
TUBING, CHLORINATED POLYETHYLENE ***TO BE USED WITH FORD WSS-M99P1111-A***
ISO 8085-3:2001 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第3部分：电熔接管件
This part of ISO 8085 specifies the requirements for polyethylene (PE) electrofusion fittings intended to be used with PE pipes and fittings
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 3: Electrofusion fittings
JIS K 6775-3:2022 供应气体燃料的聚乙烯管件 第3部分：电熔管件
Polyethylene pipe-fittings for the supply of gaseous fuels -- Part 3: Electrofusion fittings
SNI 06-0112-1987 高压水与废水排放所用玻璃纤维聚乙烯管件
Glass fibre polyester pipes for pressurized water and waste water pipeline
JIS K 6775-2:2022 供应气体燃料的聚乙烯管件 第2部分：套管接头
Polyethylene pipe-fittings for the supply of gaseous fuels -- Part 2: Spigot fittings
KS M 3515-2007 燃气用聚乙烯管配件
이 규격은 가스 연료의 공급에 사용되는 폴리에틸렌(PE) 관 및 이음관에 사용하는 폴리에틸
Polyethylene fittings for use with polyethylene pipes for the supply ofgaseous fuels-Metric series-Specifications-Electrofusion fittings having two different diameters
T/ZZB 1002-2019 燃气用埋地聚乙烯(PE)管件
本部分规定了燃气用埋地聚乙烯管件（以下简称“管件”）的定义、符号、产品分类、基本要求、技术要求、力学性能、物理性能、试验方法、检验规则、技术文件、标志和标签，包装、运输、贮存、质量承诺。 本部分适用于PE80和PE100混配料制造的公称直径为16 mm～630 mm燃气用埋地
Buried polyethylene(PE) fittings for the supply of gaseous fuels
0 燃气用埋地聚乙烯管件
本标准规定了以聚乙烯树脂为主要原料，经注塑成型的燃气用埋地聚乙烯管件（以下简称管件）的技术要求、规格尺寸、试验方法、检验规则、标志、包装、运输、贮存及管件品种。此外还规定了原料的主要性能要求。 本标准适用于工作温度为-20～40℃、最大工作压力不大于0.4MPa的埋地输送燃气的管件。管
NF T54-072:1981 塑料制品.“5”聚乙烯管件.规范
Polyethylene pipes "5". Specifications.
KS M 3515-1995 供应气体燃料的聚乙烯管件
Polyethylene pipes-fittings for the supply of gaseous fuels
GOST R 52779-2007 输气管道用聚乙烯管件.通用规范
Polyethylene fittings for gas pipelines. General specifications
ANSI/ASTM D2683:2020 外径受控聚乙烯管材用承插式聚乙烯管件的标准规范
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
AS 1460.1:1989 聚乙烯管件使用.第1部分:机械连接管件
This Standard specifies requirements for mechanical jointing fittings suitable for use with polyethylene pipes manufactured in accordance with AS 1159
Fittings for use with polyethylene pipes Part 1: Mechanical jointing fittings
NF T54-085:1988 塑料制品.承压管道用网状聚乙烯管件.规范
Plastics. Reticulate polyethylene pipes for pipelines under pressure. Specifications.
FORD ESE-M2D289-A-2004 氯化聚乙烯管件***与标准FORD WSS-M99P1111-A一起使用***
TUBING, CHLORINATED POLYETHYLENE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D289-A-2009 氯化聚乙烯管件***与标准FORD WSS-M99P1111-A一起使用***
TUBING, CHLORINATED POLYETHYLENE ***TO BE USED WITH FORD WSS-M99P1111-A***
ISO 8085-3:2001 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第3部分：电熔接管件
This part of ISO 8085 specifies the requirements for polyethylene (PE) electrofusion fittings intended to be used with PE pipes and fittings
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 3: Electrofusion fittings
JIS K 6775-3:2022 供应气体燃料的聚乙烯管件 第3部分：电熔管件
Polyethylene pipe-fittings for the supply of gaseous fuels -- Part 3: Electrofusion fittings
SNI 06-0112-1987 高压水与废水排放所用玻璃纤维聚乙烯管件
Glass fibre polyester pipes for pressurized water and waste water pipeline
JIS K 6775-2:2022 供应气体燃料的聚乙烯管件 第2部分：套管接头
Polyethylene pipe-fittings for the supply of gaseous fuels -- Part 2: Spigot fittings
KS M 3515-2007 燃气用聚乙烯管配件
이 규격은 가스 연료의 공급에 사용되는 폴리에틸렌(PE) 관 및 이음관에 사용하는 폴리에틸
Polyethylene fittings for use with polyethylene pipes for the supply ofgaseous fuels-Metric series-Specifications-Electrofusion fittings having two different diameters
T/ZZB 1002-2019 燃气用埋地聚乙烯(PE)管件
本部分规定了燃气用埋地聚乙烯管件（以下简称“管件”）的定义、符号、产品分类、基本要求、技术要求、力学性能、物理性能、试验方法、检验规则、技术文件、标志和标签，包装、运输、贮存、质量承诺。 本部分适用于PE80和PE100混配料制造的公称直径为16 mm～630 mm燃气用埋地
Buried polyethylene(PE) fittings for the supply of gaseous fuels
编辑：北检院编辑部
