GB/T 35155-2017 防气蚀型预防水锤泄放阀
Anti-cavitation type surge anticipation relief ralve
T/QGCML 1575-2023 防泄漏针阀
本文件规定了防泄漏针阀的技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于防泄漏针阀的生产和检验
Anti-leak needle valve
NAVY MIL-V-81940 B-1993 II型系统水压取样阀和泄放阀
This specification covers hydraullc sampling and bleed valves suitable for use in aircraft and mlssi le high pressure hydraulic systems
VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE II SYSTEMS
STAS 10755/2-1992 液压油动力．放泄防止逆流阀pn 200巴．类型和基本尺寸
1 Prezentul standard stabile?te tipurile ?t dimensiunile principale ale supapelor de sens deblocabile pn 200 bar, utilizate ?n ac?ion?ri hidrostatice
Hydraulic fluid power. Releaseable non-return valves pn 200 bar. Types and basic dimensions
CJ/T 404-2012 防气蚀大压差可调减压阀
本标准规定了防气蚀大压差可调减压阀的术语和定义、结构型式、产品型号、零件材料及结构、要去、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于公称尺寸为DN50～DNI200，公称压力为PN10～PN50，介质温度小于或等于60℃，给水用防气蚀大压差可调减压阀
Anti-cavitation pressure regulating valve
AS 4118.1.5:1996 消防喷水系统．构件．集水阀门和预作用阀门
Specifies the construction, performance and testing requirements for valves used in deluge and pre-action sprinkler systems
Fire sprinkler systems - Components - Deluge and pre-action valves
GM 9985516-1989 腐蚀预防复合
This material specification describes the general requirements of material types from ABS-, ASArespectively SAN-blends, which are used in injected
CORROSION PREVENTIVE COMPOUND.
VDI 2035 Blatt 2-2009 水加热装置损坏的预防 水侧腐蚀
Guideline VDI 2035 Part 2 applies to water heating installations according to EN 12828 within a building when the flow temperature under correction
Prevention of damage in water heating installations - Water-side corrosion
ARMY MS35670 REV D VALID NOTICE 2-2006 安全泄放阀
MS35670D, dated 31 May 2001, remains inactive for new design;however, the document is valid for use
VALVE, SAFETY RELIEF
ARMY MS35670 REV D NOTICE 1-2001 安全泄放阀
This notice should be filed in front of MS53670D, dated 11 June 1993
VALVE, SAFETY RELIEF
ARMY MS35670 REV D-1993 安全泄放阀
This commercial item description covers brown kraft paper used for general wrapping applications
VALVE, SAFETY RELIEF
JB/T 13768-2020 电磁泄放阀
Solenoid relief valve
UNE-EN 14491:2012 粉尘爆炸泄放防护系统
Dust explosion venting protective systems (Endorsed by AENOR in September of 2012.)
ONORM B 2511-1981 排水系统防气阀．要求
Diese ?NORM enth?lt die funktionellen Anforderungen an Geruchs-verschlüsse in Geb?uden und Grundstücken. Diese k?nnen in Entw?sserungsanlagen und
Traps for drainage Systems; requirements
CB/T 3841-2000 舷侧锅炉泄放阀
本标准规定了舷侧锅炉泄放阀的分类、技术要求、试验方法、检验规则及标志、包装、贮存。 本标准适用于工作压力不大于2.5 MPa的泄放阀的设计和制造
Overboard boiler discharge valve
GB/T 35155-2017 防气蚀型预防水锤泄放阀
Anti-cavitation type surge anticipation relief ralve
T/QGCML 1575-2023 防泄漏针阀
本文件规定了防泄漏针阀的技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于防泄漏针阀的生产和检验
Anti-leak needle valve
NAVY MIL-V-81940 B-1993 II型系统水压取样阀和泄放阀
This specification covers hydraullc sampling and bleed valves suitable for use in aircraft and mlssi le high pressure hydraulic systems
VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE II SYSTEMS
STAS 10755/2-1992 液压油动力．放泄防止逆流阀pn 200巴．类型和基本尺寸
1 Prezentul standard stabile?te tipurile ?t dimensiunile principale ale supapelor de sens deblocabile pn 200 bar, utilizate ?n ac?ion?ri hidrostatice
Hydraulic fluid power. Releaseable non-return valves pn 200 bar. Types and basic dimensions
CJ/T 404-2012 防气蚀大压差可调减压阀
本标准规定了防气蚀大压差可调减压阀的术语和定义、结构型式、产品型号、零件材料及结构、要去、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于公称尺寸为DN50～DNI200，公称压力为PN10～PN50，介质温度小于或等于60℃，给水用防气蚀大压差可调减压阀
Anti-cavitation pressure regulating valve
AS 4118.1.5:1996 消防喷水系统．构件．集水阀门和预作用阀门
Specifies the construction, performance and testing requirements for valves used in deluge and pre-action sprinkler systems
Fire sprinkler systems - Components - Deluge and pre-action valves
GM 9985516-1989 腐蚀预防复合
This material specification describes the general requirements of material types from ABS-, ASArespectively SAN-blends, which are used in injected
CORROSION PREVENTIVE COMPOUND.
VDI 2035 Blatt 2-2009 水加热装置损坏的预防 水侧腐蚀
Guideline VDI 2035 Part 2 applies to water heating installations according to EN 12828 within a building when the flow temperature under correction
Prevention of damage in water heating installations - Water-side corrosion
ARMY MS35670 REV D VALID NOTICE 2-2006 安全泄放阀
MS35670D, dated 31 May 2001, remains inactive for new design;however, the document is valid for use
VALVE, SAFETY RELIEF
ARMY MS35670 REV D NOTICE 1-2001 安全泄放阀
This notice should be filed in front of MS53670D, dated 11 June 1993
VALVE, SAFETY RELIEF
ARMY MS35670 REV D-1993 安全泄放阀
This commercial item description covers brown kraft paper used for general wrapping applications
VALVE, SAFETY RELIEF
JB/T 13768-2020 电磁泄放阀
Solenoid relief valve
UNE-EN 14491:2012 粉尘爆炸泄放防护系统
Dust explosion venting protective systems (Endorsed by AENOR in September of 2012.)
ONORM B 2511-1981 排水系统防气阀．要求
Diese ?NORM enth?lt die funktionellen Anforderungen an Geruchs-verschlüsse in Geb?uden und Grundstücken. Diese k?nnen in Entw?sserungsanlagen und
Traps for drainage Systems; requirements
CB/T 3841-2000 舷侧锅炉泄放阀
本标准规定了舷侧锅炉泄放阀的分类、技术要求、试验方法、检验规则及标志、包装、贮存。 本标准适用于工作压力不大于2.5 MPa的泄放阀的设计和制造
Overboard boiler discharge valve
编辑：北检院编辑部
