服务热线:400-635-0567

轻轨用接头夹板检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

GB/T 11265-1989

本标准规定了轻轨用接头夹板的尺寸、外形、重量及允许偏差,技术要求,试验方法,检验规则和包装、标志及质量证明书等。 本标准适用于轻轨用普通碳素钢热轧接头夹板

Fish plates for light rails

GB 11265-1989

Joint splint for light rail

STAS 3016-1979 铁路车辆.

1.1 Prezentul standard se refera la eelisele ?i pl?cile utilizate la asamblarea suprastructurii liniei de cale ferat? cu ?ine u?oare tip 9,3

Railway rolling stock FISHPLATES AND PLATES FOR LIGHT RAILS

KS R 9164-2008 铁

이 표준은 보통 레일1), 열처리 레일2), 중계 레일3), 끝부 열처리 레일4) 및 KS

Fish plates for rails

GOST 33184-2014 距铁路. 规格

Joint bars for rails of gauge railway. Specifications

TB/T 2342.3-1993 60kg/m钢型式尺寸

Type and size of joint splint for 60kg/m rail

TB/T 2342.4-1993 75kg/m钢型式尺寸

Type and size of joint splint for 75kg/m rail

TB/T 2342.2-1993 50kg/m钢型式尺寸

Type and size of joint splint for 50kg/m rail

TB/T 2342.1-1993 43kg/m钢型式尺寸

Type and size of joint splint for 43kg/m rail

TB/T 2345-1993 43~75kg/m钢供货技术要求

Technical requirements for the supply of joint splints for 43~75kg/m rails

SANS 915:2007 尖端木螺钉

Specifies the dimensional and constructional requirements for coach screws for flat-bottom rails of mass per length 15, 22, and 30 kg/m

Coach screws for light rails

GB 11266-1989

Backing plate for light rail

GB/T 11266-1989

本标准规定了轻轨用垫板的尺寸、外形、重量及允许偏差,技术要求,试验方法,检验规则和包装、标志及质量证明书等。 本标准适用于轻轨用普通碳素钢热轧垫板

Tie plates for light rails

TB/T 2345-2008 43kg/m-75kg/m钢订货技术条件

本标准规定了钢轨接头夹板型式尺寸及允许偏差、技术要求、试验方法、检验规则、包装标志和质量证明书。 本标准适用于43kg/m、50kg/m、60kg/m和75kg/m钢轨用接头夹板

Technical specifications for the procurement of 43kg/m~75kg/m as joint bar

DIN 1596:1988 带拧紧机构的型管.有车辆单端的管

This standard applies to sleepers being used predominantely in rail-vehicles, and not being subject of any other standard

Light pipe clips with pipe-tightening; single-ended for rail vehicles

GB/T 11265-1989

本标准规定了轻轨用接头夹板的尺寸、外形、重量及允许偏差,技术要求,试验方法,检验规则和包装、标志及质量证明书等。 本标准适用于轻轨用普通碳素钢热轧接头夹板

Fish plates for light rails

GB 11265-1989

Joint splint for light rail

STAS 3016-1979 铁路车辆.

1.1 Prezentul standard se refera la eelisele ?i pl?cile utilizate la asamblarea suprastructurii liniei de cale ferat? cu ?ine u?oare tip 9,3

Railway rolling stock FISHPLATES AND PLATES FOR LIGHT RAILS

KS R 9164-2008 铁

이 표준은 보통 레일1), 열처리 레일2), 중계 레일3), 끝부 열처리 레일4) 및 KS

Fish plates for rails

GOST 33184-2014 距铁路. 规格

Joint bars for rails of gauge railway. Specifications

TB/T 2342.3-1993 60kg/m钢型式尺寸

Type and size of joint splint for 60kg/m rail

TB/T 2342.4-1993 75kg/m钢型式尺寸

Type and size of joint splint for 75kg/m rail

TB/T 2342.2-1993 50kg/m钢型式尺寸

Type and size of joint splint for 50kg/m rail

TB/T 2342.1-1993 43kg/m钢型式尺寸

Type and size of joint splint for 43kg/m rail

TB/T 2345-1993 43~75kg/m钢供货技术要求

Technical requirements for the supply of joint splints for 43~75kg/m rails

SANS 915:2007 尖端木螺钉

Specifies the dimensional and constructional requirements for coach screws for flat-bottom rails of mass per length 15, 22, and 30 kg/m

Coach screws for light rails

GB 11266-1989

Backing plate for light rail

GB/T 11266-1989

本标准规定了轻轨用垫板的尺寸、外形、重量及允许偏差,技术要求,试验方法,检验规则和包装、标志及质量证明书等。 本标准适用于轻轨用普通碳素钢热轧垫板

Tie plates for light rails

TB/T 2345-2008 43kg/m-75kg/m钢订货技术条件

本标准规定了钢轨接头夹板型式尺寸及允许偏差、技术要求、试验方法、检验规则、包装标志和质量证明书。 本标准适用于43kg/m、50kg/m、60kg/m和75kg/m钢轨用接头夹板

Technical specifications for the procurement of 43kg/m~75kg/m as joint bar

DIN 1596:1988 带拧紧机构的型管.有车辆单端的管

This standard applies to sleepers being used predominantely in rail-vehicles, and not being subject of any other standard

Light pipe clips with pipe-tightening; single-ended for rail vehicles

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询