土壤/固体废物检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

DB50/T 427-2012 、沉积 二恶英类的筛查 酶联免疫法

本标准规定了采用酶联免疫法筛查土壤、沉积物和固体废物(包含飞灰、盐泥、工业废渣、污泥)中的多氯代二苯并二恶英(PCDDS)和多氯代二苯并呋喃(PCDFS)方法. 本标准适用于土壤、沉积物和固体废物中二恶英类的筛查,利用酶联免疫法筛查土壤、沉积物和固体废物中的多氯代二苯并二恶英和多氯代二苯呋喃。通过

ELISA for screening dioxins in soil, sediment and solid waste

ASTM D8064-16 使用多个单色激发光束的单色能量色散X射线荧光光谱法进行元素分析的标准测试方法

1.1 This test method is based upon energy-dispersive X-ray Fluorescence (EDXRF) spectrometry using multiple monochromatic excitation beams

Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams

T/CI 015-2023 典型大宗化利用技术导则

4 土壤化工作 一般规定 针对特定固体废物土壤利用发布的专用国家环境保护标准的,其处理、利用、土壤化过程执行专用环境保护标准。 土壤化所使用的固体废物根据GB 5085以及HJ 298要求鉴别后不具有腐蚀性、毒性、易燃性、传染性、反应性中一种或多种危险特性的固体废物,且未列

Technical guidelines for soil formation of typical bulk solid wastes

DB51/T 2988-2022 四川省堆存场所风险评估技术规范

本文件规定了固体废物堆存场所土壤风险评估的术语和定义、工作程序和技术要求。 本文件适用于生活垃圾、一般工业固体废物和危险废物堆存场所及周边土壤污染状况调查与潜在污染风险评估。 本文件不适用于农业固体废物、放射性物质、致病性生物堆存场所周边土壤污染状况调查与风险评估

Technical specifications for soil risk assessment of solid waste storage sites in Sichuan Province

ASTM D8273-20 碱性萃取后中总氰化和有效氰化的测定

1.1 This practice is used for the determination of total or available cyanide in solid waste, sediment and soil samples after alkaline extraction

Standard Practice for Determination of Total and Available Cyanide in Solid Waste and Soil after Alkaline Extraction

DIN 19742:2014-08 质量 提取后使用气相色谱质谱法(GC-MS)测定污泥、沉积中选定的邻苯二甲酸盐

Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

ISO/DIS 15192:2023

Soil and waste

T/SXSFS 001-2021 调理剂

适用于以煤矸石为主要原料制备的多孔材料,与畜禽粪便、农林废弃物等经均混、发酵、腐熟制成的土壤调理剂

Solid Waste Based Soil Conditioners

DIN 19742:2014 质. 使用气相色谱质谱法 (GC-MS) 对提取和含量测定后的污泥, 泥沙, 以及中选定邻苯二甲酸酯含量的测定

Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

DIN EN 15192:2007 的特性.用光度测定离子色谱法和碱性吸收法测定六价铬元素

This standard describes the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography

Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection; English version of DIN EN 15192:2007-02

NF X31-039:2013 污泥、生,.强热失量的测定

Sludge, treated biowaste, soil and waste - Determination of loss on ignition

BS EN 15192:2007 用碱性消化法和带分光光度探测的离子色谱法测定材料和中铬(VI)含量 此方法可测定铬(VI)的质量分数大于0.1mg/kg的

Characterisation of waste and soil - Determination of chromium (VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection

BS EN 15192:2006 用碱性消化法和带分光光度探测的离子色谱法测定材料和中铬(VI)含量.此方法可测定铬(VI)的质量分数大于0.1mg/kg的

This standard describes the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography

This standard describes the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to determine Cr(VI)-mass fractions in solids higher than 0,1 mg/kg

T/SXSFS 002-2021 调理剂施用技术要求

适用于固废基土壤调理剂在矿区生态修复、园林绿化等领域的施用技术要求

Technical Requirements for Application of Solid Waste Based Soil Conditioners

IS 10158-1982 分析方法(不包括工业

1.1 This standard prescribes methods of analysis of solid wastes ( excluding industrial solid wastes ) for the determination of the following

DB50/T 427-2012 、沉积 二恶英类的筛查 酶联免疫法

本标准规定了采用酶联免疫法筛查土壤、沉积物和固体废物(包含飞灰、盐泥、工业废渣、污泥)中的多氯代二苯并二恶英(PCDDS)和多氯代二苯并呋喃(PCDFS)方法. 本标准适用于土壤、沉积物和固体废物中二恶英类的筛查,利用酶联免疫法筛查土壤、沉积物和固体废物中的多氯代二苯并二恶英和多氯代二苯呋喃。通过

ELISA for screening dioxins in soil, sediment and solid waste

ASTM D8064-16 使用多个单色激发光束的单色能量色散X射线荧光光谱法进行元素分析的标准测试方法

1.1 This test method is based upon energy-dispersive X-ray Fluorescence (EDXRF) spectrometry using multiple monochromatic excitation beams

Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams

T/CI 015-2023 典型大宗化利用技术导则

4 土壤化工作 一般规定 针对特定固体废物土壤利用发布的专用国家环境保护标准的,其处理、利用、土壤化过程执行专用环境保护标准。 土壤化所使用的固体废物根据GB 5085以及HJ 298要求鉴别后不具有腐蚀性、毒性、易燃性、传染性、反应性中一种或多种危险特性的固体废物,且未列

Technical guidelines for soil formation of typical bulk solid wastes

DB51/T 2988-2022 四川省堆存场所风险评估技术规范

本文件规定了固体废物堆存场所土壤风险评估的术语和定义、工作程序和技术要求。 本文件适用于生活垃圾、一般工业固体废物和危险废物堆存场所及周边土壤污染状况调查与潜在污染风险评估。 本文件不适用于农业固体废物、放射性物质、致病性生物堆存场所周边土壤污染状况调查与风险评估

Technical specifications for soil risk assessment of solid waste storage sites in Sichuan Province

ASTM D8273-20 碱性萃取后中总氰化和有效氰化的测定

1.1 This practice is used for the determination of total or available cyanide in solid waste, sediment and soil samples after alkaline extraction

Standard Practice for Determination of Total and Available Cyanide in Solid Waste and Soil after Alkaline Extraction

DIN 19742:2014-08 质量 提取后使用气相色谱质谱法(GC-MS)测定污泥、沉积中选定的邻苯二甲酸盐

Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

ISO/DIS 15192:2023

Soil and waste

T/SXSFS 001-2021 调理剂

适用于以煤矸石为主要原料制备的多孔材料,与畜禽粪便、农林废弃物等经均混、发酵、腐熟制成的土壤调理剂

Solid Waste Based Soil Conditioners

DIN 19742:2014 质. 使用气相色谱质谱法 (GC-MS) 对提取和含量测定后的污泥, 泥沙, 以及中选定邻苯二甲酸酯含量的测定

Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination using gas chromatography mass spectrometry (GC-MS)

DIN EN 15192:2007 的特性.用光度测定离子色谱法和碱性吸收法测定六价铬元素

This standard describes the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography

Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection; English version of DIN EN 15192:2007-02

NF X31-039:2013 污泥、生,.强热失量的测定

Sludge, treated biowaste, soil and waste - Determination of loss on ignition

BS EN 15192:2007 用碱性消化法和带分光光度探测的离子色谱法测定材料和中铬(VI)含量 此方法可测定铬(VI)的质量分数大于0.1mg/kg的

Characterisation of waste and soil - Determination of chromium (VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection

BS EN 15192:2006 用碱性消化法和带分光光度探测的离子色谱法测定材料和中铬(VI)含量.此方法可测定铬(VI)的质量分数大于0.1mg/kg的

This standard describes the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography

This standard describes the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to determine Cr(VI)-mass fractions in solids higher than 0,1 mg/kg

T/SXSFS 002-2021 调理剂施用技术要求

适用于固废基土壤调理剂在矿区生态修复、园林绿化等领域的施用技术要求

Technical Requirements for Application of Solid Waste Based Soil Conditioners

IS 10158-1982 分析方法(不包括工业

1.1 This standard prescribes methods of analysis of solid wastes ( excluding industrial solid wastes ) for the determination of the following

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。