云母带矿物绝缘波纹铜护套电缆及终端检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

GB/T 34926-2017 额定压0.6/1kV以下

Corrugated copper metallic sheath mica tape mineral insulated cables and their terminations with a rated voltage up to and including 0.6/1kV

T/CASME 305-2023 额定压0.6/1kV

本文件规定了额定电压0.6/1kV云母带矿物绝缘波纹铝护套电缆的分类、代号、规格和标记、使用特性、技术要求、试验方法、检验规则、标志、包装、运输和贮存

Corrugated aluminum metallic sheath mica tape mineral insulated cables andtheir terminations for rated voltage of 0.6/1kV

GB/T 13033.3-1991 额定压750V以下 第3部分;

本标准规定了额定电压750V及以下矿物绝缘电缆终端的技术要求,试验方法及包装。 本标准适用于布线用铜芯铜护套矿物绝缘电缆终端,结构示意图如图1。 终端除应符合本标准规定的要求外,还应符合GB13033.1的相应要求

Mineral insulated cables and terminations with a rated voltage not exceeding 750V--Part 3: Terminations for mineral insulated cables with copper conductors and copper sheath

GB 13033.2-1991 额定压750V以下 第2部分:

Mineral insulated cables and their terminations with a rated voltage not exceeding 750V Part 2:Mineral insulated cables with copper conductors and copper sheath

GB/T 13033.2-1991 额定压750V以下 第2部分:

本标准规定了额定电压750V及以下铜芯铜护套矿物绝缘电缆的型号、规格、技术要求、试验方法、包装、标志及运输、防护。 本标准适用于布线用铜芯铜护套矿物绝缘电缆。 电缆除应符合本标准规定的要求外,还应符合GB13033.1的相应要求

Mineral insulated cables and their terminations with a rated voltage not exceeding 750V--Part 2: Mineral insulated cables with copper conductors and copper sheath

JG/T 313-2014 额定压0.6/1KV以下金属

本标准规定了额定电压0.6/1 kV及以下金属护套机矿物绝缘电缆及终端的术语和定义、分类、代号、规格和标记、一般规定、要求、试验方法、检验规则、标志和标签、包装、运输和贮存。本标准适用于额定电压0.6/1 kV及以下布线用金属护套机矿物绝缘电缆及终端

Metal sheath inorganic mineral insulated cables and their terminations with a rated voltage not exceeding 0.6/1 kV

JG/T 313-2011 额定压750V以下金属

本标准规定了额定电压750V及以下金属护套机矿物绝缘电缆及终端的术语和定、分类、代号、规格和标记、技术要求、试验方法、检验规则、标志和标签、包装、运输、贮存。 本标准适用于电力布线用金属护套机矿物绝缘电缆、终端及外套

Metal sheath inorganic mineral insulated cables and their terminations with a rated voltage not exceeding 750V

GB/T 13033.2-2007 额定压750V以下 第2部分:

GB/T 13033的本部分对终端规定的要求适用于符合GB/T 13033.1规定的矿物绝缘电缆

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 2: Terminations

BS EN 60702-2:2002 额定压不超过750V的.

This standard specifies requirements for terminations for use with mineral insulated cables complying with the requirements of IEC 60702-1

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations

GB/T 13033.1-2007 额定压750V以下 第1部分:

GB/T 13033的本部分适用于额定电压500V和750V铜芯铜或铜合金护套矿物绝缘一般布线电缆,如果需要可在铜护套外挤包一层防腐外套。外套不作为金属护套的电气绝缘。 电缆用终端的要求见GB/T 13033.2。 本部分规定了制造要求和特性以使矿物绝缘电缆在正确使用

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 1: Cables

BS EN 60702-1:2002 额定压不超过750V的.

This standard applies to mineral insulated general wiring cables with copper or copper alloy sheath and copper conductors and with rated voltages

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables

IS 5755-1970 铝导体的规范

1.1 This standard covers the requirements for aluminium sheathed cables with powdered-mineral insulation and aluminium conductors, with or without

IEC 60702-2:2002 额定压不超过750V的.第2部分:

This standard specifies requirements for terminations for use with mineral insulated cables complying with the requirements of IEC 60702-1

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations

KS C IEC 60702-2:2005 额定压不超过750V的.第2部分:

이 규격은 IEC 60702-1의 요구 사항에 따르는 무기물 절연 케이블 사용을 위한 단말

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V-Part 2:Terminations

IEC 60702-2:2002+AMD1:2015 CSV 额定压的 不超过750V.第2部分:

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations

GB/T 34926-2017 额定压0.6/1kV以下

Corrugated copper metallic sheath mica tape mineral insulated cables and their terminations with a rated voltage up to and including 0.6/1kV

T/CASME 305-2023 额定压0.6/1kV

本文件规定了额定电压0.6/1kV云母带矿物绝缘波纹铝护套电缆的分类、代号、规格和标记、使用特性、技术要求、试验方法、检验规则、标志、包装、运输和贮存

Corrugated aluminum metallic sheath mica tape mineral insulated cables andtheir terminations for rated voltage of 0.6/1kV

GB/T 13033.3-1991 额定压750V以下 第3部分;

本标准规定了额定电压750V及以下矿物绝缘电缆终端的技术要求,试验方法及包装。 本标准适用于布线用铜芯铜护套矿物绝缘电缆终端,结构示意图如图1。 终端除应符合本标准规定的要求外,还应符合GB13033.1的相应要求

Mineral insulated cables and terminations with a rated voltage not exceeding 750V--Part 3: Terminations for mineral insulated cables with copper conductors and copper sheath

GB 13033.2-1991 额定压750V以下 第2部分:

Mineral insulated cables and their terminations with a rated voltage not exceeding 750V Part 2:Mineral insulated cables with copper conductors and copper sheath

GB/T 13033.2-1991 额定压750V以下 第2部分:

本标准规定了额定电压750V及以下铜芯铜护套矿物绝缘电缆的型号、规格、技术要求、试验方法、包装、标志及运输、防护。 本标准适用于布线用铜芯铜护套矿物绝缘电缆。 电缆除应符合本标准规定的要求外,还应符合GB13033.1的相应要求

Mineral insulated cables and their terminations with a rated voltage not exceeding 750V--Part 2: Mineral insulated cables with copper conductors and copper sheath

JG/T 313-2014 额定压0.6/1KV以下金属

本标准规定了额定电压0.6/1 kV及以下金属护套机矿物绝缘电缆及终端的术语和定义、分类、代号、规格和标记、一般规定、要求、试验方法、检验规则、标志和标签、包装、运输和贮存。本标准适用于额定电压0.6/1 kV及以下布线用金属护套机矿物绝缘电缆及终端

Metal sheath inorganic mineral insulated cables and their terminations with a rated voltage not exceeding 0.6/1 kV

JG/T 313-2011 额定压750V以下金属

本标准规定了额定电压750V及以下金属护套机矿物绝缘电缆及终端的术语和定、分类、代号、规格和标记、技术要求、试验方法、检验规则、标志和标签、包装、运输、贮存。 本标准适用于电力布线用金属护套机矿物绝缘电缆、终端及外套

Metal sheath inorganic mineral insulated cables and their terminations with a rated voltage not exceeding 750V

GB/T 13033.2-2007 额定压750V以下 第2部分:

GB/T 13033的本部分对终端规定的要求适用于符合GB/T 13033.1规定的矿物绝缘电缆

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 2: Terminations

BS EN 60702-2:2002 额定压不超过750V的.

This standard specifies requirements for terminations for use with mineral insulated cables complying with the requirements of IEC 60702-1

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations

GB/T 13033.1-2007 额定压750V以下 第1部分:

GB/T 13033的本部分适用于额定电压500V和750V铜芯铜或铜合金护套矿物绝缘一般布线电缆,如果需要可在铜护套外挤包一层防腐外套。外套不作为金属护套的电气绝缘。 电缆用终端的要求见GB/T 13033.2。 本部分规定了制造要求和特性以使矿物绝缘电缆在正确使用

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 1: Cables

BS EN 60702-1:2002 额定压不超过750V的.

This standard applies to mineral insulated general wiring cables with copper or copper alloy sheath and copper conductors and with rated voltages

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables

IS 5755-1970 铝导体的规范

1.1 This standard covers the requirements for aluminium sheathed cables with powdered-mineral insulation and aluminium conductors, with or without

IEC 60702-2:2002 额定压不超过750V的.第2部分:

This standard specifies requirements for terminations for use with mineral insulated cables complying with the requirements of IEC 60702-1

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations

KS C IEC 60702-2:2005 额定压不超过750V的.第2部分:

이 규격은 IEC 60702-1의 요구 사항에 따르는 무기물 절연 케이블 사용을 위한 단말

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V-Part 2:Terminations

IEC 60702-2:2002+AMD1:2015 CSV 额定压的 不超过750V.第2部分:

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。