GB/T 26729-2011 农业灌溉设备.地表灌溉用聚氯乙烯（PVC）低压管.技术规范和试验方法
本标准规定了用于灌溉中通过阀门供给和分配低压灌溉水的未增塑聚氯乙烯（PVC）管的技术要求。 本标准适用于管径范围为50mm～315mm低压室外用PVC管
Agricultural irrigation equipment.PVC above-ground low-pressure pipe for surface irrigation.Specifications and test methods
GB/T 13664-2023 低压灌溉用硬聚氯乙烯（PVC-U）管材
Rigid polyvinyl chloride (PVC-U) pipes for low-pressure irrigation
GB/T 13664-2006 低压输水灌溉用硬聚氯乙烯(PVC-U)管材
本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的低压输水灌溉用硬聚氯乙烯管材（以下简称管材）的产品分类、技术要求、试验方法及检验规则、标志、包装、运输、贮存。 本标准适用于公称压力为0.4MPa及以下的低压输水灌溉用管材
Unplasticized poly(vinyl chloride) (PVC-U) pipes for low-pressure conveyance in irrigation
GB/T 13664-1992 低压输水灌溉用薄壁硬聚氯乙烯(PVC-U)管材
本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的低压输水灌溉用硬聚氯乙烯管材（以下简称管材）的产品分类、技术要求、试验方法及检验规则、标志、包装、运输、储存。 本标准适用于公称压力0.32MPa以下的低压输水灌溉用管材
Thin wall unplasticized polyvinyl chloride(PVC-U) pipes for low-pressure conveyance in irrigation
ISO 16149:2006 农业灌溉设备.地表灌溉用聚乙烯地面低压管.规范和试验方法
This International Standard specifies the requirements for unplasticized polyvinyl chloride (PVC) piping, used to supply and to distribute
Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surface irrigation - Specifications and test methods
BS ISO 16149:2006 农业灌溉设备.地表灌溉用聚乙烯地面低压管.规范和试验方法
It specifies the requirements for unplasticized polyvinyl chloride (PVC) piping, used to supply and to distribute low-pressure irrigation water
Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surface irrigation - Specifications and test methods
T/CASME 607-2023 低压输水灌溉用聚乙烯（PE）管材
本文件规定了低压输水灌溉用聚乙烯（PE）管材的术语和定义、材料、技术要求、试验方法、检验规则、标志、包装、运输、贮存
Polyethylene (PE) pipes for low pressure water conveyance irrigation
NF T54-086:1990 塑料 灌溉企业用聚氯乙烯非塑料(PVC-U)管和球 规格
Plastiques - Tubes et raccords en polychlorure de vinyle non plastifié (PVC-U) pour les réseaux d'irrigation enterrés - Spécifications.
DS 2138:2003 灌溉用未增塑聚氯乙烯的压力管道系统
This standard deals with PVC-U pipes, fittings and assemblies for irrigation only
Pressure piping systems of unplasticized polyvinyl chloride for irrigation
DB65/T 3317-2011 微灌系统用硬聚氯乙烯（PVC-U）管材
Rigid polyvinyl chloride (PVC-U) pipes for micro irrigation system
KS M 3813-2001 液化石油气低压聚氯乙烯(PVC)软管
이 규격은 액화 석유 가스용 저압 폴리염화비닐 호스에 대하여 규정한다
Polyvinyl chloride low pressure hose for liquefied petroleum gas
GB/T 20201-2006 灌溉用聚乙烯(PE)压力管机械连接管件
本标准规定了灌溉用聚乙烯(PE)压力管机械连接管件(以下简称“管件”)的产品分类、材料、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于公称外径小于110mm、使用压力不大于0.6MPa、水温不超过45℃的灌溉用聚乙烯压力管的机械连接管件。 本标准不适用于
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
IS 12786-1989 灌溉设备——用于灌溉支管的聚乙烯管道——规范
This standard lays down requirements for polyethylene pipes of outside diameter from 12 mm up to 32 mm to be used for irrigation laterals
NF U51-432:1990 灌溉设备.小型灌溉设备用聚乙烯管.规范
Irrigation equipmpent. Polyethylene tubes for micro-irrigation equipment. Specifications.
ISO 8779:2001 聚乙烯灌溉支管 规范
This International Standard specifies the test methods and required properties for pipes made from polyethylene (PE), and intended to be used
Polyethylene (PE) pipes for irrigation laterals - Specifications
GB/T 26729-2011 农业灌溉设备.地表灌溉用聚氯乙烯（PVC）低压管.技术规范和试验方法
本标准规定了用于灌溉中通过阀门供给和分配低压灌溉水的未增塑聚氯乙烯（PVC）管的技术要求。 本标准适用于管径范围为50mm～315mm低压室外用PVC管
Agricultural irrigation equipment.PVC above-ground low-pressure pipe for surface irrigation.Specifications and test methods
GB/T 13664-2023 低压灌溉用硬聚氯乙烯（PVC-U）管材
Rigid polyvinyl chloride (PVC-U) pipes for low-pressure irrigation
GB/T 13664-2006 低压输水灌溉用硬聚氯乙烯(PVC-U)管材
本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的低压输水灌溉用硬聚氯乙烯管材（以下简称管材）的产品分类、技术要求、试验方法及检验规则、标志、包装、运输、贮存。 本标准适用于公称压力为0.4MPa及以下的低压输水灌溉用管材
Unplasticized poly(vinyl chloride) (PVC-U) pipes for low-pressure conveyance in irrigation
GB/T 13664-1992 低压输水灌溉用薄壁硬聚氯乙烯(PVC-U)管材
本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的低压输水灌溉用硬聚氯乙烯管材（以下简称管材）的产品分类、技术要求、试验方法及检验规则、标志、包装、运输、储存。 本标准适用于公称压力0.32MPa以下的低压输水灌溉用管材
Thin wall unplasticized polyvinyl chloride(PVC-U) pipes for low-pressure conveyance in irrigation
ISO 16149:2006 农业灌溉设备.地表灌溉用聚乙烯地面低压管.规范和试验方法
This International Standard specifies the requirements for unplasticized polyvinyl chloride (PVC) piping, used to supply and to distribute
Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surface irrigation - Specifications and test methods
BS ISO 16149:2006 农业灌溉设备.地表灌溉用聚乙烯地面低压管.规范和试验方法
It specifies the requirements for unplasticized polyvinyl chloride (PVC) piping, used to supply and to distribute low-pressure irrigation water
Agricultural irrigation equipment - PVC above-ground low-pressure pipe for surface irrigation - Specifications and test methods
T/CASME 607-2023 低压输水灌溉用聚乙烯（PE）管材
本文件规定了低压输水灌溉用聚乙烯（PE）管材的术语和定义、材料、技术要求、试验方法、检验规则、标志、包装、运输、贮存
Polyethylene (PE) pipes for low pressure water conveyance irrigation
NF T54-086:1990 塑料 灌溉企业用聚氯乙烯非塑料(PVC-U)管和球 规格
Plastiques - Tubes et raccords en polychlorure de vinyle non plastifié (PVC-U) pour les réseaux d'irrigation enterrés - Spécifications.
DS 2138:2003 灌溉用未增塑聚氯乙烯的压力管道系统
This standard deals with PVC-U pipes, fittings and assemblies for irrigation only
Pressure piping systems of unplasticized polyvinyl chloride for irrigation
DB65/T 3317-2011 微灌系统用硬聚氯乙烯（PVC-U）管材
Rigid polyvinyl chloride (PVC-U) pipes for micro irrigation system
KS M 3813-2001 液化石油气低压聚氯乙烯(PVC)软管
이 규격은 액화 석유 가스용 저압 폴리염화비닐 호스에 대하여 규정한다
Polyvinyl chloride low pressure hose for liquefied petroleum gas
GB/T 20201-2006 灌溉用聚乙烯(PE)压力管机械连接管件
本标准规定了灌溉用聚乙烯(PE)压力管机械连接管件(以下简称“管件”)的产品分类、材料、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于公称外径小于110mm、使用压力不大于0.6MPa、水温不超过45℃的灌溉用聚乙烯压力管的机械连接管件。 本标准不适用于
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
IS 12786-1989 灌溉设备——用于灌溉支管的聚乙烯管道——规范
This standard lays down requirements for polyethylene pipes of outside diameter from 12 mm up to 32 mm to be used for irrigation laterals
NF U51-432:1990 灌溉设备.小型灌溉设备用聚乙烯管.规范
Irrigation equipmpent. Polyethylene tubes for micro-irrigation equipment. Specifications.
ISO 8779:2001 聚乙烯灌溉支管 规范
This International Standard specifies the test methods and required properties for pipes made from polyethylene (PE), and intended to be used
Polyethylene (PE) pipes for irrigation laterals - Specifications
编辑：北检院编辑部
