注射剂用活塞检测

ISO 11040-5:2001 带药注射器 第5部分:注射剂活塞

This part of ISO 11040 applies to plungers for glass barrels (single-chamber design) for injection preparations in accordance with ISO 11040-4

Prefilled syringes - Part 5: Plungers for injectables

YY/T 0243-2016 一次性使用注射器用活塞

本标准规定了一次性使用注射器用活塞（以下简称活塞）的术语和定义、分类和标记、要求、型式检验、包装、标志、运输和贮存。本标准适用于一次性使用注射器配套用活塞。该活塞可适用于一次性使用菌注射器和一次性使用菌胰岛素注射器等，但不适用于预装药液的注射器以及与药液配套的注射器

Plunger seal of syringes for single use

YY 0243-2016 一次性使用注射器用活塞

Disposable syringe plunger

DS/ISO 8362-2:1993 注射剂用注射剂容器及附件．第2部分：注射剂小瓶瓶塞

This part of ISO 8362 specifies the design, dimensions, material, performance, requirements and tests for closures for injection vials covered by ISO

Injection containers for injectables and accessories. Part 2: Closures for injection vials

DS/EN 28362-2:1993 注射剂用注射剂容器及附件．第2部分：注射剂小瓶瓶塞

Injection containers for injectables and accessories. Part 2: Closures for injection vials

YY/T 0243-2003 一次性使用菌注射器用活塞

本标准规定了一次性使用菌注射器用活塞的分类与命名、要求、试验方法、检验规则和标志、使用说明书及包装、运输、贮存。 本标准适用于一次性使用菌注射器用活塞，该产品供一次性使用菌注射器配套用

Plunger of sterile syringes for single use

ISO 8362-2:1988 注射剂用注射容器及附件 第2部分:注射瓶瓶塞

Specifies the design, dimensions, material, performance, requirements and tests for single-use closures for injection vials covered by ISO 8362-1

Injection containers for injectables and accessories; part 2: closures for injection vials

ISO 11040-5:2012 预灌装注射器.第5部分:注射剂用柱塞

Prefilled syringes — This part of ISO 11040 specifies the shape, dimensions, material, performance requirements and labelling of plunger stoppers

Prefilled syringes - Part 5: Plunger stoppers for injectables

DOD A-A-54088-1990 桶和活塞式外科注射器

The syringe shall be a plastic, disposable, barrel and plunger type, irrigating syringe with catheter tip, intended for single use. The syringe shall

SYRINGE, IRRIGATING, SURGICAL, BARREL AND PLUNGER TYPE

DOD A-A-54713-1992 三种方式外科注射器活塞

This Commercial Item Description covers a metallic stopcock with three separate fluid paths and Luer connectors

STOPCOCK, SURGICAL SYRINGE, THREE WAY, AYER

YBB 0008-2004 预灌封注射器用溴化丁基橡胶活塞

Bromobutyl rubber plungers for prefilled syringes

YBB 0007-2004 预灌封注射器用氯化丁基橡胶活塞

Chlorobutyl rubber plungers for prefilled syringes

DIN ISO 11040-5:2013-12 预充式注射器 第5部分：注射剂柱塞

Prefilled syringes - Part 5: Plunger stoppers for injectables (ISO 11040-5:2012)

EN 28362-2:1993 注射剂用注射器容器及附件.第2部分:注射瓶塞(ISO 8362-2-1988)

Injection Containers for Injectables and Accessories - Part 2: Closures for Injection Vials (ISO 8362-2 : 1988)

ISO 8362-5:1995 注射剂用注射容器及附件 第5部分:注射瓶冷冻干燥瓶塞

Describes the design, dimensions, materials, performance and test for the type of closure for injection vials, as described in ISO 8362-1 and ISO

Injection containers for injectables and accessories - Part 5: Freeze drying closures for injection vials

ISO 11040-5:2001 带药注射器 第5部分:注射剂活塞

This part of ISO 11040 applies to plungers for glass barrels (single-chamber design) for injection preparations in accordance with ISO 11040-4

Prefilled syringes - Part 5: Plungers for injectables

YY/T 0243-2016 一次性使用注射器用活塞

本标准规定了一次性使用注射器用活塞（以下简称活塞）的术语和定义、分类和标记、要求、型式检验、包装、标志、运输和贮存。本标准适用于一次性使用注射器配套用活塞。该活塞可适用于一次性使用菌注射器和一次性使用菌胰岛素注射器等，但不适用于预装药液的注射器以及与药液配套的注射器

Plunger seal of syringes for single use

YY 0243-2016 一次性使用注射器用活塞

Disposable syringe plunger

DS/ISO 8362-2:1993 注射剂用注射剂容器及附件．第2部分：注射剂小瓶瓶塞

This part of ISO 8362 specifies the design, dimensions, material, performance, requirements and tests for closures for injection vials covered by ISO

Injection containers for injectables and accessories. Part 2: Closures for injection vials

DS/EN 28362-2:1993 注射剂用注射剂容器及附件．第2部分：注射剂小瓶瓶塞

Injection containers for injectables and accessories. Part 2: Closures for injection vials

YY/T 0243-2003 一次性使用菌注射器用活塞

本标准规定了一次性使用菌注射器用活塞的分类与命名、要求、试验方法、检验规则和标志、使用说明书及包装、运输、贮存。 本标准适用于一次性使用菌注射器用活塞，该产品供一次性使用菌注射器配套用

Plunger of sterile syringes for single use

ISO 8362-2:1988 注射剂用注射容器及附件 第2部分:注射瓶瓶塞

Specifies the design, dimensions, material, performance, requirements and tests for single-use closures for injection vials covered by ISO 8362-1

Injection containers for injectables and accessories; part 2: closures for injection vials

ISO 11040-5:2012 预灌装注射器.第5部分:注射剂用柱塞

Prefilled syringes — This part of ISO 11040 specifies the shape, dimensions, material, performance requirements and labelling of plunger stoppers

Prefilled syringes - Part 5: Plunger stoppers for injectables

DOD A-A-54088-1990 桶和活塞式外科注射器

The syringe shall be a plastic, disposable, barrel and plunger type, irrigating syringe with catheter tip, intended for single use. The syringe shall

SYRINGE, IRRIGATING, SURGICAL, BARREL AND PLUNGER TYPE

DOD A-A-54713-1992 三种方式外科注射器活塞

This Commercial Item Description covers a metallic stopcock with three separate fluid paths and Luer connectors

STOPCOCK, SURGICAL SYRINGE, THREE WAY, AYER

YBB 0008-2004 预灌封注射器用溴化丁基橡胶活塞

Bromobutyl rubber plungers for prefilled syringes

YBB 0007-2004 预灌封注射器用氯化丁基橡胶活塞

Chlorobutyl rubber plungers for prefilled syringes

DIN ISO 11040-5:2013-12 预充式注射器 第5部分：注射剂柱塞

Prefilled syringes - Part 5: Plunger stoppers for injectables (ISO 11040-5:2012)

EN 28362-2:1993 注射剂用注射器容器及附件.第2部分:注射瓶塞(ISO 8362-2-1988)

Injection Containers for Injectables and Accessories - Part 2: Closures for Injection Vials (ISO 8362-2 : 1988)

ISO 8362-5:1995 注射剂用注射容器及附件 第5部分:注射瓶冷冻干燥瓶塞

Describes the design, dimensions, materials, performance and test for the type of closure for injection vials, as described in ISO 8362-1 and ISO

Injection containers for injectables and accessories - Part 5: Freeze drying closures for injection vials