CNS 15090-2007 乙醇、变性燃料乙醇及燃料乙醇pHe测定法
本标准规定乙醇、变性燃料乙醇及燃料乙醇等含有高浓度燃料乙醇之pHe(乙醇酸碱值)测定法，适用于含有70 %以上乙醇之燃料乙醇Ed75～Ed85
Method of test for determination of pHe of ethanol, denatured fuel ethanol, and fuel ethanol
GB 18350-2013 变性燃料乙醇
本标准规定了变性燃料乙醇的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于以淀粉质、糖质、纤维素等为原料,经发酵、蒸馏、脱水后制得并添加变性剂使其变性的燃料乙醇
Denatured fuel ethanol
GB 18350-2001 变性燃料乙醇
本标准规定了变性燃料乙醇的定义、要求、试验方法、检验规则和标志、包装、运输、贮存要求。 本标准适用于以淀粉质、糖质为原料，经发酵、蒸馏制得乙醇，脱水后，再添加变性剂变性的燃料乙醇。它可以按规定的比例与汽油混合作为车用点燃式内燃机的燃料
Denatured fuel ethanol
GM GM4729M-1994 燃料乙醇-E85
Fuel Ethanol -E85
GME B 040 2103-2009 燃料乙醇 E 85
ASTM D6423-08 乙醇、改性燃料乙醇和燃料乙醇Ed75-ed85的Phe测定的标准试验方法
The acid strength, as measured by pHe, is a good predictor of the corrosion potential of ethanol fuels. It is preferable to total acidity because
Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)
GB/T 40062-2021 变性燃料乙醇和燃料乙醇中总机氯的测定方法 离子色谱法
本标准规定了测定变性燃料乙醇和燃料乙醇中总机氯含量的离子色谱法,包括试剂和材料、仪器和设备、分析步骤、计算、分析结果的表述、精确度(95%置信水平)及质量保证与控制。本标准适用于变性燃料乙醇和燃料乙醇中总机氯离子含量的测定。 注:本标准总机氯离子的测定含量范围为0.08 mg/L~10.0
Method for determination of total inorganic chloride in denatured fuel ethanol and fuel ethanol—Ion chromatography
ASTM D6423-99 测定乙醇、变性燃料乙醇和燃料乙醇中苯丙氨酸的标准试验方法（Ed75-Ed85）
1.1 This test method covers a procedure to determine a measure of the acid strength of high ethanol content fuels. These include ethanol, denatured
Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)
NB/T 10896-2021 燃料乙醇工业用秸秆
本文件规定了燃料乙醇工业用秸秆的外观与质量要求、检测方法，以及储存和运输要求。 本文件适用于燃料乙醇工业用秸秆的收购、储存、运输和使用
Straw for fuel ethanol industry
NB/T 10405-2020 燃料乙醇原料 玉米秸秆
Fuel ethanol raw material corn straw
NB/T 10895-2021 燃料乙醇工业用木薯干
本文件规定了燃料乙醇工业用木薯干的要求、试验方法、检验规则及运输和储存等要求。 本文件适用于以木薯为原料加工而成，作为工业生产原料的干木薯块、片等形态木薯的品质分类等级
Dried cassava for fuel ethanol industry
DIN 51625:2008 汽车燃料.乙醇燃料.要求和试验方法
This standard specifies the requirements and test methods for ethanol-containing fuels with ethanol as principal component which are used in motors
Automotive fuels - Ethanol Fuel - Requirements and test methods
ABNT NBR 10547 Versão Corrigida-2012 燃料乙醇电导率的测定
This Standard specifies a method for determining the electrical conductivity in hydrous and anhydrous ethanol containing up to three per cent volume
Fuel ethanol - Determination of electrical conductivity
ASTM E1344-90(2006 燃料乙醇生产设备的评定
1.1 This guide shall apply to FEMF as defined in Terminology E 1126. The guide is primarily intended for, but not exclusively limited
Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities
ASTM E1344-90(1997)e1 燃料乙醇生产设备的评定
1.1 This guide shall apply to FEMF as defined in Standard Terminology E1126. The guide is primarily intended for, but not exclusively limited
Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities
CNS 15090-2007 乙醇、变性燃料乙醇及燃料乙醇pHe测定法
本标准规定乙醇、变性燃料乙醇及燃料乙醇等含有高浓度燃料乙醇之pHe(乙醇酸碱值)测定法，适用于含有70 %以上乙醇之燃料乙醇Ed75～Ed85
Method of test for determination of pHe of ethanol, denatured fuel ethanol, and fuel ethanol
GB 18350-2013 变性燃料乙醇
本标准规定了变性燃料乙醇的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于以淀粉质、糖质、纤维素等为原料,经发酵、蒸馏、脱水后制得并添加变性剂使其变性的燃料乙醇
Denatured fuel ethanol
GB 18350-2001 变性燃料乙醇
本标准规定了变性燃料乙醇的定义、要求、试验方法、检验规则和标志、包装、运输、贮存要求。 本标准适用于以淀粉质、糖质为原料，经发酵、蒸馏制得乙醇，脱水后，再添加变性剂变性的燃料乙醇。它可以按规定的比例与汽油混合作为车用点燃式内燃机的燃料
Denatured fuel ethanol
GM GM4729M-1994 燃料乙醇-E85
Fuel Ethanol -E85
GME B 040 2103-2009 燃料乙醇 E 85
ASTM D6423-08 乙醇、改性燃料乙醇和燃料乙醇Ed75-ed85的Phe测定的标准试验方法
The acid strength, as measured by pHe, is a good predictor of the corrosion potential of ethanol fuels. It is preferable to total acidity because
Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)
GB/T 40062-2021 变性燃料乙醇和燃料乙醇中总机氯的测定方法 离子色谱法
本标准规定了测定变性燃料乙醇和燃料乙醇中总机氯含量的离子色谱法,包括试剂和材料、仪器和设备、分析步骤、计算、分析结果的表述、精确度(95%置信水平)及质量保证与控制。本标准适用于变性燃料乙醇和燃料乙醇中总机氯离子含量的测定。 注:本标准总机氯离子的测定含量范围为0.08 mg/L~10.0
Method for determination of total inorganic chloride in denatured fuel ethanol and fuel ethanol—Ion chromatography
ASTM D6423-99 测定乙醇、变性燃料乙醇和燃料乙醇中苯丙氨酸的标准试验方法（Ed75-Ed85）
1.1 This test method covers a procedure to determine a measure of the acid strength of high ethanol content fuels. These include ethanol, denatured
Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)
NB/T 10896-2021 燃料乙醇工业用秸秆
本文件规定了燃料乙醇工业用秸秆的外观与质量要求、检测方法，以及储存和运输要求。 本文件适用于燃料乙醇工业用秸秆的收购、储存、运输和使用
Straw for fuel ethanol industry
NB/T 10405-2020 燃料乙醇原料 玉米秸秆
Fuel ethanol raw material corn straw
NB/T 10895-2021 燃料乙醇工业用木薯干
本文件规定了燃料乙醇工业用木薯干的要求、试验方法、检验规则及运输和储存等要求。 本文件适用于以木薯为原料加工而成，作为工业生产原料的干木薯块、片等形态木薯的品质分类等级
Dried cassava for fuel ethanol industry
DIN 51625:2008 汽车燃料.乙醇燃料.要求和试验方法
This standard specifies the requirements and test methods for ethanol-containing fuels with ethanol as principal component which are used in motors
Automotive fuels - Ethanol Fuel - Requirements and test methods
ABNT NBR 10547 Versão Corrigida-2012 燃料乙醇电导率的测定
This Standard specifies a method for determining the electrical conductivity in hydrous and anhydrous ethanol containing up to three per cent volume
Fuel ethanol - Determination of electrical conductivity
ASTM E1344-90(2006 燃料乙醇生产设备的评定
1.1 This guide shall apply to FEMF as defined in Terminology E 1126. The guide is primarily intended for, but not exclusively limited
Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities
ASTM E1344-90(1997)e1 燃料乙醇生产设备的评定
1.1 This guide shall apply to FEMF as defined in Standard Terminology E1126. The guide is primarily intended for, but not exclusively limited
Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities
编辑：北检院编辑部
