环氧树脂涂层钢筋-涂层检测

AASHTO M 284M/M 284-2008 环氧树脂涂层钢筋标准规范.材料和涂层要求

Standard Specification for Epoxy-Coated Reinforcing Bars: Materials and Coating Requirements

JG 3042-1997 环氧树脂涂层钢筋

本标准规定了环氧树脂涂层钢筋的产品型号、技术要求、试验方法、检验规则、涂层修补以及包装、标志、搬运和堆放。 本标准适用于在工厂生产条件下，用普通带肋钢筋和普通光圆钢筋采用环氧树脂粉末以静电喷涂方法生产的环氧树脂涂层钢筋

Epoxy resin coated steel bars

KS D 3629-1995 环氧树脂涂层钢筋

이 규격은 해수의 분위기에 사용되는 철근 콘크리티 보강용 이형 철근을 정전 스프레이 방법에

Fusion bonded epoxy coated reinforcing steel bars

JG/T 502-2016 环氧树脂涂层钢筋

Epoxy Coated Rebar

ISO 14654:1999 钢筋混凝土用环氧树脂涂层钢

This International Standard specifies requirements for fusion-bonded epoxy-coated post-fabricated and pre-fabricated steel bar, wire and welded fabric

Epoxy-coated steel for the reinforcement of concrete

NACE SP0395-1999 钢筋的熔结环氧树脂涂层（货号 21071）

Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars (Item No. 21071)

ASTM A1055-08 锌和环氧树脂双涂层钢筋标准规范

1.1 This specification covers deformed and plain steel reinforcing bars with a dual coating of zinc alloy and an epoxy coating

Standard Specification for Zinc and Epoxy Dual Coated Steel Reinforcing Bars

ASTM A1055/A1055M-22 锌和环氧树脂双涂层钢筋标准规范

1.1 This specification covers deformed and plain steel reinforcing bars with a dual coating of zinc-alloy followed by an epoxy coating applied

Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

ASTM A1055/A1055M-08 锌和环氧树脂双涂层钢筋标准规范

1.1 This specification covers deformed and plain steel reinforcing bars with a dual coating of zinc alloy and an epoxy coating

Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

ISO 14656:1999 钢筋混凝土用环氧树脂涂层钢的环氧树脂粉末和密封材料

This International Standard specifies requirements for epoxy powders for use in preparing fusion-bonded epoxy-coated steel reinforcing bar, wire

Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

GB/T 33240-2016 钢筋混凝土用镀锌铝合金-环氧树脂复合涂层钢筋

本标准规定了镀锌铝合金-环氧树脂复合涂层钢筋的术语和定义、分类和代号、订货内容、技术要求、试验方法、检验规则、包装、标志、质量证明书、搬运及贮存。 本标准适用于钢筋混凝土用镀锌铝合金-环氧树脂复合涂层带肋钢筋和光圆钢筋(以下简称钢筋)。 锌铝合金镀层应采用连续热浸镀法生产，环氧树脂涂层应采用静电

Zinc-aluminum alloy-epoxy duplex coated steel bars for the reinforcement of concrete

FORD ESE-M8G231-A3-2000 环氧树脂涂层的不锈钢垫片

GASKET, STAINLESS STEEL, EPOXY RESIN COATED

GB/T 25826-2022 钢筋混凝土用环氧涂层钢筋

本文件规定了混凝土用熔融结合环氧涂层钢筋和成品钢筋的分类代号、订货内容、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本文件适用于涂覆前、后加工的钢筋和涂层前加工的成品钢筋

Epoxy-coated steel for the reinforcement of concrete

T/ZZB 1237-2019 钢筋混凝土用环氧涂层钢筋

本标准规定了钢筋混凝土用环氧涂层钢筋的术语和定义、基本要求、技术要求、试验方法、检验规则以及标志、包装、运输、贮存和质量证明书、质量承诺。 本标准适用于建设用混凝土环氧涂层带肋钢筋和光圆钢筋（以下简称钢筋

Epoxy—coated steel for the reinforcement of concrete

GB/T 25826-2010 钢筋混凝土用环氧涂层钢筋

本标准规定了混凝土用熔融结合环氧涂层钢筋和成品钢筋的术语和定义、产品型号、订货内容、技术要求、试验方法、检验规则、包装、标志和质量证明书等。 本标准适用于涂覆前、后加工的钢筋和涂层前加工的成品钢筋

Epoxy-coated steel for the reinforcement of concrete

AASHTO M 284M/M 284-2008 环氧树脂涂层钢筋标准规范.材料和涂层要求

Standard Specification for Epoxy-Coated Reinforcing Bars: Materials and Coating Requirements

JG 3042-1997 环氧树脂涂层钢筋

本标准规定了环氧树脂涂层钢筋的产品型号、技术要求、试验方法、检验规则、涂层修补以及包装、标志、搬运和堆放。 本标准适用于在工厂生产条件下，用普通带肋钢筋和普通光圆钢筋采用环氧树脂粉末以静电喷涂方法生产的环氧树脂涂层钢筋

Epoxy resin coated steel bars

KS D 3629-1995 环氧树脂涂层钢筋

이 규격은 해수의 분위기에 사용되는 철근 콘크리티 보강용 이형 철근을 정전 스프레이 방법에

Fusion bonded epoxy coated reinforcing steel bars

JG/T 502-2016 环氧树脂涂层钢筋

Epoxy Coated Rebar

ISO 14654:1999 钢筋混凝土用环氧树脂涂层钢

This International Standard specifies requirements for fusion-bonded epoxy-coated post-fabricated and pre-fabricated steel bar, wire and welded fabric

Epoxy-coated steel for the reinforcement of concrete

NACE SP0395-1999 钢筋的熔结环氧树脂涂层（货号 21071）

Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars (Item No. 21071)

ASTM A1055-08 锌和环氧树脂双涂层钢筋标准规范

1.1 This specification covers deformed and plain steel reinforcing bars with a dual coating of zinc alloy and an epoxy coating

Standard Specification for Zinc and Epoxy Dual Coated Steel Reinforcing Bars

ASTM A1055/A1055M-22 锌和环氧树脂双涂层钢筋标准规范

1.1 This specification covers deformed and plain steel reinforcing bars with a dual coating of zinc-alloy followed by an epoxy coating applied

Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

ASTM A1055/A1055M-08 锌和环氧树脂双涂层钢筋标准规范

1.1 This specification covers deformed and plain steel reinforcing bars with a dual coating of zinc alloy and an epoxy coating

Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

ISO 14656:1999 钢筋混凝土用环氧树脂涂层钢的环氧树脂粉末和密封材料

This International Standard specifies requirements for epoxy powders for use in preparing fusion-bonded epoxy-coated steel reinforcing bar, wire

Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

GB/T 33240-2016 钢筋混凝土用镀锌铝合金-环氧树脂复合涂层钢筋

本标准规定了镀锌铝合金-环氧树脂复合涂层钢筋的术语和定义、分类和代号、订货内容、技术要求、试验方法、检验规则、包装、标志、质量证明书、搬运及贮存。 本标准适用于钢筋混凝土用镀锌铝合金-环氧树脂复合涂层带肋钢筋和光圆钢筋(以下简称钢筋)。 锌铝合金镀层应采用连续热浸镀法生产，环氧树脂涂层应采用静电

Zinc-aluminum alloy-epoxy duplex coated steel bars for the reinforcement of concrete

FORD ESE-M8G231-A3-2000 环氧树脂涂层的不锈钢垫片

GASKET, STAINLESS STEEL, EPOXY RESIN COATED

GB/T 25826-2022 钢筋混凝土用环氧涂层钢筋

本文件规定了混凝土用熔融结合环氧涂层钢筋和成品钢筋的分类代号、订货内容、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本文件适用于涂覆前、后加工的钢筋和涂层前加工的成品钢筋

Epoxy-coated steel for the reinforcement of concrete

T/ZZB 1237-2019 钢筋混凝土用环氧涂层钢筋

本标准规定了钢筋混凝土用环氧涂层钢筋的术语和定义、基本要求、技术要求、试验方法、检验规则以及标志、包装、运输、贮存和质量证明书、质量承诺。 本标准适用于建设用混凝土环氧涂层带肋钢筋和光圆钢筋（以下简称钢筋

Epoxy—coated steel for the reinforcement of concrete

GB/T 25826-2010 钢筋混凝土用环氧涂层钢筋

本标准规定了混凝土用熔融结合环氧涂层钢筋和成品钢筋的术语和定义、产品型号、订货内容、技术要求、试验方法、检验规则、包装、标志和质量证明书等。 本标准适用于涂覆前、后加工的钢筋和涂层前加工的成品钢筋

Epoxy-coated steel for the reinforcement of concrete