服务热线:400-635-0567

硫化橡胶或热塑性橡胶与织物粘合强度检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

GB/T 532-2008 的测定

警告——使用本部分的人员应有正规实验室工作的实践经验。本部分并为指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施,并保证符合国家有关法规规定的条件。 本标准规定了用剥离法测定橡胶或热塑性橡胶与织物层间或织物与织物层间粘合界面分离所需力的方法。 本标准适用于粘合层近似平面的样品或内径为

Rubber,vulcanized or thermoplastic.Determination of adhesion to textile fabric

GB/T 532-1997 的测定

本标准规定了用剥离法测定橡胶或热塑性橡胶与织物层间或织物与织物层间粘合界面分离所需力的试验方法。 本标准适用于粘合层近似平面或内径为50mm及50mm以上的圆筒状试样。本标准不适用于层间表面含有急剧弯曲角度或其他在切取试样时有严重不规则处的试样

Rubber,vulcanized or thermoplastic--Determination of adhesion to textile fabric

ISO 36:2005 的测定

This International Standard specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded

Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics

ISO 36:2017 .的测定

Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics

ISO 36:2011 .的测定

This International Standard specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded

Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics

GOST ISO 36-2013 . 纺面料的测定

Rubber or thermoplastic. Determination of adhesion to textile fabrics

GB/T 11211-2009 .金属的测定.二板法

警告:使用本标准的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施,并保证符合国家有关规定条件。 本标准规定了测定粘合在两块平行金属板之间的橡胶与金属粘合强度的试验方法。 本方法适用于在标准试验室的条件下制备的试样,试验结果也可为橡胶胶料的

Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method

GB/T 11211-2009 金属的测定 二板法

Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method

GB/T 11211-2009 金属的测定 二板法

Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method

NF T46-008:1990 .纺力的测定

Vulcanized or thermoplastic rubber. Determination of the adherence to textiles.

GB/T 7760-2003 硬质板材的测定 90°剥离法

本标准规定了测定硫化橡胶或热塑性橡胶与硬质板材剥离粘合强度的一种方法。 本标准适用于硫化橡胶或热塑性橡胶与硬质板材剥离粘合强度的测定。 本标准不适用于硬质橡胶与硬质板材剥离粘合强度的测定

Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method

ISO 36:1999 纤维的测定

Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabric

GOST ISO 814-2013 . 采用二板法测定金属的

Rubber vulcanized or thermoplastic. Determination of adhesion to metal by two-plate method

NF T46-058:2010 .基底的测定.90℃剥离法.

Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 o peel method.

KS M ISO 813:2019 基材的测定90°剥离法

Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90° peel method

GB/T 532-2008 的测定

警告——使用本部分的人员应有正规实验室工作的实践经验。本部分并为指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施,并保证符合国家有关法规规定的条件。 本标准规定了用剥离法测定橡胶或热塑性橡胶与织物层间或织物与织物层间粘合界面分离所需力的方法。 本标准适用于粘合层近似平面的样品或内径为

Rubber,vulcanized or thermoplastic.Determination of adhesion to textile fabric

GB/T 532-1997 的测定

本标准规定了用剥离法测定橡胶或热塑性橡胶与织物层间或织物与织物层间粘合界面分离所需力的试验方法。 本标准适用于粘合层近似平面或内径为50mm及50mm以上的圆筒状试样。本标准不适用于层间表面含有急剧弯曲角度或其他在切取试样时有严重不规则处的试样

Rubber,vulcanized or thermoplastic--Determination of adhesion to textile fabric

ISO 36:2005 的测定

This International Standard specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded

Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics

ISO 36:2017 .的测定

Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics

ISO 36:2011 .的测定

This International Standard specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded

Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics

GOST ISO 36-2013 . 纺面料的测定

Rubber or thermoplastic. Determination of adhesion to textile fabrics

GB/T 11211-2009 .金属的测定.二板法

警告:使用本标准的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施,并保证符合国家有关规定条件。 本标准规定了测定粘合在两块平行金属板之间的橡胶与金属粘合强度的试验方法。 本方法适用于在标准试验室的条件下制备的试样,试验结果也可为橡胶胶料的

Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method

GB/T 11211-2009 金属的测定 二板法

Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method

GB/T 11211-2009 金属的测定 二板法

Determination of Adhesion Strength of Vulcanized or Thermoplastic Rubber to Metal Two-Plate Method

NF T46-008:1990 .纺力的测定

Vulcanized or thermoplastic rubber. Determination of the adherence to textiles.

GB/T 7760-2003 硬质板材的测定 90°剥离法

本标准规定了测定硫化橡胶或热塑性橡胶与硬质板材剥离粘合强度的一种方法。 本标准适用于硫化橡胶或热塑性橡胶与硬质板材剥离粘合强度的测定。 本标准不适用于硬质橡胶与硬质板材剥离粘合强度的测定

Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method

ISO 36:1999 纤维的测定

Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabric

GOST ISO 814-2013 . 采用二板法测定金属的

Rubber vulcanized or thermoplastic. Determination of adhesion to metal by two-plate method

NF T46-058:2010 .基底的测定.90℃剥离法.

Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90 o peel method.

KS M ISO 813:2019 基材的测定90°剥离法

Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90° peel method

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询