驱动主机检测

T/ZZB 2035-2021 自动扶梯及自动人行道驱动主机

本文件规定了自动扶梯及自动人行道驱动主机的术语和定义、型式与参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本文件适用于交流电压不高于660 V，功率不大于22 kW，采用蜗轮减速的自动扶梯及自动人行道驱动主机（以下简称驱动主机

Driving machine of escalator and passenger conveyor

T/CEA 0033-2022 驱动主机制动器带载可靠性试验方法

驱动主机制动器试验样品应是按照正常工艺生产装配完成并安装(或连接)在试验驱动主机或试验工装上，调试完成且自检合格的产品。驱动主机制动器的性能与电源类型和参数有关，应使用符合要求的电源和试验仪器对驱动主机制动器进行试验

Test method for reliability of traction machine brake with load

DB50/T 1393-2023 电梯永磁同步驱动主机故障诊断导则

本文件适用于额定速度不大于 6.0 m/s的电梯永磁同步驱动主机故障诊断

Guidelines for Fault Diagnosis of Elevator Permanent Magnet Synchronous Drive Host

T/CEA 3010-2020 自动扶梯和自动人行道驱动主机功率计算与选择

规定了自动扶梯和自动人行道驱动主机（以下简称驱动主机）功率计算的原则、需要考虑的因素、方法等，结合安全性和经济性为自动扶梯和自动人行道驱动主机功率的合理选择提供了指导

Power calculation and selection of driving machine for escalators and moving walks

T/CEA 3011-2020 自动扶梯和自动人行道驱动主机测试方法及其性能指标

规定了端部驱动自动扶梯和自动人行道驱动主机的测试和检验要求、检查规则、标志、随行文件以及包装、运输和贮存

Test method and performance index of driving machine for escalators and moving walks

X3.101-1984 信息系统 硬盘驱动器和主机之间的接口

Information Systems - Interface Between Rigid Disk Drive(s) and Host(s)

STAS 7921-1981 静气驱动．齿砂轮机．主要参数

Prezentul standard stabile?te gama de valori pentru parametrii principali ai motoarelor eu ro?i din?ate, utilizate ?n ac?ion?ri pneumostatice

Pneumostatic drives TOOTHED WHEEL ENGINES Main parameters

JRA 4045-2008 运输制冷装置标准（主机驱动）

Standard for transport refrigeration units (Main engine driven)

CSN 27 8135-1983 动土机械驱动轴型号，主要参数及尺寸

Schválenie ST SEV 3645-82 doporu?ilo Federálně ministerstvo v?eobecného strojárstva. Spracovatel: Z?S, V?skumno-v?vojov? ústav Zvolen - J. Vol?ko

Earth - moving machinery Drivig axles. Types, main parameters and di- mensions

KS X 5016-1993 信息处理系统.盒式软磁盘驱动器和主机控制器接口

이 규격은 KS C 5655 및 KS C 5645에 규정하는 플렉시블 디스크 카트리지를 사

INTERFACE BETWEEN FLEXIBLE DISK CARTRIDGE DRIVES AND THEIR HOST CONTROLLERS

STAS 11662-1986 链架空输送机驱动站．主要参数

Prezentul standard stabile?te parametrii principali ai sta?iilor de ac?ionare destinate antren?rii transportoarelor suspendate cu lan? cu zale

Chain overhead conveyers DRIVING STATIONS Main parameters

KS X 5016-2013 软盘盒式驱动器与其主机控制器之间的接口

INTERFACE BETWEEN FLEXIBLE DISK CARTRIDGE DRIVES AND THEIR HOST CONTROLLERS

X3.80-1981 软盘盒式驱动器与其主机控制器之间的接口

INTERFACES BETWEEN FLEXIBLE DISK CARTRIDGE DRIVES AND THEIR HOST CONTROLLERS

STAS 11706-1988 正常轨距的液压驱动柴油机车．主要参数

Prezentul standard stabile?te parametrii principali ai locomotivelor diesel cu transmisie hidraulic?, cu ecartament normal, utilizate la traetarea

HYDRAULIC DRIVE DIESEL LOCO- MOTIVES, WITH NORMAL GAUGE Main parameters

NF Z66-802:1995 信息处理系统.盒式软磁盘机驱动装置与其主机控制器之间的接口

Information processing systems. Interface between flexible disk cartridge drives and their host controllers.

T/ZZB 2035-2021 自动扶梯及自动人行道驱动主机

本文件规定了自动扶梯及自动人行道驱动主机的术语和定义、型式与参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本文件适用于交流电压不高于660 V，功率不大于22 kW，采用蜗轮减速的自动扶梯及自动人行道驱动主机（以下简称驱动主机

Driving machine of escalator and passenger conveyor

T/CEA 0033-2022 驱动主机制动器带载可靠性试验方法

驱动主机制动器试验样品应是按照正常工艺生产装配完成并安装(或连接)在试验驱动主机或试验工装上，调试完成且自检合格的产品。驱动主机制动器的性能与电源类型和参数有关，应使用符合要求的电源和试验仪器对驱动主机制动器进行试验

Test method for reliability of traction machine brake with load

DB50/T 1393-2023 电梯永磁同步驱动主机故障诊断导则

本文件适用于额定速度不大于 6.0 m/s的电梯永磁同步驱动主机故障诊断

Guidelines for Fault Diagnosis of Elevator Permanent Magnet Synchronous Drive Host

T/CEA 3010-2020 自动扶梯和自动人行道驱动主机功率计算与选择

规定了自动扶梯和自动人行道驱动主机（以下简称驱动主机）功率计算的原则、需要考虑的因素、方法等，结合安全性和经济性为自动扶梯和自动人行道驱动主机功率的合理选择提供了指导

Power calculation and selection of driving machine for escalators and moving walks

T/CEA 3011-2020 自动扶梯和自动人行道驱动主机测试方法及其性能指标

规定了端部驱动自动扶梯和自动人行道驱动主机的测试和检验要求、检查规则、标志、随行文件以及包装、运输和贮存

Test method and performance index of driving machine for escalators and moving walks

X3.101-1984 信息系统 硬盘驱动器和主机之间的接口

Information Systems - Interface Between Rigid Disk Drive(s) and Host(s)

STAS 7921-1981 静气驱动．齿砂轮机．主要参数

Prezentul standard stabile?te gama de valori pentru parametrii principali ai motoarelor eu ro?i din?ate, utilizate ?n ac?ion?ri pneumostatice

Pneumostatic drives TOOTHED WHEEL ENGINES Main parameters

JRA 4045-2008 运输制冷装置标准（主机驱动）

Standard for transport refrigeration units (Main engine driven)

CSN 27 8135-1983 动土机械驱动轴型号，主要参数及尺寸

Schválenie ST SEV 3645-82 doporu?ilo Federálně ministerstvo v?eobecného strojárstva. Spracovatel: Z?S, V?skumno-v?vojov? ústav Zvolen - J. Vol?ko

Earth - moving machinery Drivig axles. Types, main parameters and di- mensions

KS X 5016-1993 信息处理系统.盒式软磁盘驱动器和主机控制器接口

이 규격은 KS C 5655 및 KS C 5645에 규정하는 플렉시블 디스크 카트리지를 사

INTERFACE BETWEEN FLEXIBLE DISK CARTRIDGE DRIVES AND THEIR HOST CONTROLLERS

STAS 11662-1986 链架空输送机驱动站．主要参数

Prezentul standard stabile?te parametrii principali ai sta?iilor de ac?ionare destinate antren?rii transportoarelor suspendate cu lan? cu zale

Chain overhead conveyers DRIVING STATIONS Main parameters

KS X 5016-2013 软盘盒式驱动器与其主机控制器之间的接口

INTERFACE BETWEEN FLEXIBLE DISK CARTRIDGE DRIVES AND THEIR HOST CONTROLLERS

X3.80-1981 软盘盒式驱动器与其主机控制器之间的接口

INTERFACES BETWEEN FLEXIBLE DISK CARTRIDGE DRIVES AND THEIR HOST CONTROLLERS

STAS 11706-1988 正常轨距的液压驱动柴油机车．主要参数

Prezentul standard stabile?te parametrii principali ai locomotivelor diesel cu transmisie hidraulic?, cu ecartament normal, utilizate la traetarea

HYDRAULIC DRIVE DIESEL LOCO- MOTIVES, WITH NORMAL GAUGE Main parameters

NF Z66-802:1995 信息处理系统.盒式软磁盘机驱动装置与其主机控制器之间的接口

Information processing systems. Interface between flexible disk cartridge drives and their host controllers.