高钛渣检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

YS/T 298-2007

本标准规定了高钛渣的要求、试验方法、检验规则和标志、包装、运输、贮存及订货单内容等。 本标准适用于以钛铁矿为原料,采用电炉熔炼生产的供生产四氯化钛、人造金红石及钛白使用的高钛渣

High titanium slage

YS/T 298-1994

High titanium slag

YS/T 298-2015

High titanium slag

YS/T 514.5-2006 、金红石化学分析方 燃烧-碘量法测定硫量

Combustion-iodometric method for determination of sulfur content in high titanium slag and rutile chemical analysis method

GB/T 4102.5-1983 ,金红石化学分析方法 燃烧-碘量法测定硫量

本标准适用于高钛渣、金红石中硫量的测定。测定范围:0.010~1.00%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The direct combustion-iodimetric method for the determination of sulfur content

GB/T 4102.6-1983 ,金红石化学分析方法 硫酸钡重量法测定硫量

本标准适用于高钛渣、金红石中硫量的测定。测定范围:0.20~5.00%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The barium sulfate gravimetric method for the determination of sulfur content

GB/T 4102.8-1983 ,金红石化学分析方法 EDTA容量法测定氧化铝量

本标准适用于高钛渣、金红石中氧化铝量的测定。测定范围:0.50~5.00%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The EDTA volumetric method for the determination of aluminium oxide content

GB/T 4102.3-1983 ,金红石化学分析方法 萃取钼蓝光度法测定磷量

本标准适用于高钛渣、金红石中磷的测定。测定范围:0.001~0.100%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The extraction-molybdenum blue photometric method for the determination of phosphorus content

GB/T 4102.4-1983 ,金红石化学分析方法 燃烧-库仑法测定碳量

本标准适用于高钛渣、金红石中碳量的测定。测定范围:0.010~0.500%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The direct combustion-coulometric method for the determination of total carbon content

GB/T 4102.1-1983 ,金红石化学分析方法 硫酸铁铵容量法测定二氧化

本标准适用于高钛渣、金红石中二氧化钛量的测定。测定范围:70.0%以上。 本标准不适用于含锡、铬、钒量各大于0.25mg的试液中二氧化钛的测定。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The ammonium ferric sulfate volumetric method for the determination of titanium dioxide content

YS/T 514.4-2006 、金红石化学分析方法 燃烧-库仑法测定碳量

High titanium slag, rutile chemical analysis method Combustion-Coulometric method to determine carbon content

GB/T 4102.7-1983 ,金红石化学分析方法 重量法测定二氧化硅量

本标准适用于高钛渣、金红石中二氧化硅量的测定。测定范围:1.00~10.00%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The gravimetric method for the determination of silicon dioxide content

YS/T 514.2-2006 、金红石化学分析方法 重铬酸钾容量法测定全铁量

High titanium slag, rutile chemical analysis method Potassium dichromate volumetric method for determination of total iron content

YS/T 514.6-2006 、金红石化学分析方法 硫酸钡重量法测定硫量

High titanium slag, rutile chemical analysis method barium sulfate gravimetric method for determination of sulfur content

YS/T 514.7-2006 、金红石化学分析方法 重量法测定二氧化硅量

High titanium slag, rutile chemical analysis method gravimetric determination of silicon dioxide content

YS/T 298-2007

本标准规定了高钛渣的要求、试验方法、检验规则和标志、包装、运输、贮存及订货单内容等。 本标准适用于以钛铁矿为原料,采用电炉熔炼生产的供生产四氯化钛、人造金红石及钛白使用的高钛渣

High titanium slage

YS/T 298-1994

High titanium slag

YS/T 298-2015

High titanium slag

YS/T 514.5-2006 、金红石化学分析方 燃烧-碘量法测定硫量

Combustion-iodometric method for determination of sulfur content in high titanium slag and rutile chemical analysis method

GB/T 4102.5-1983 ,金红石化学分析方法 燃烧-碘量法测定硫量

本标准适用于高钛渣、金红石中硫量的测定。测定范围:0.010~1.00%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The direct combustion-iodimetric method for the determination of sulfur content

GB/T 4102.6-1983 ,金红石化学分析方法 硫酸钡重量法测定硫量

本标准适用于高钛渣、金红石中硫量的测定。测定范围:0.20~5.00%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The barium sulfate gravimetric method for the determination of sulfur content

GB/T 4102.8-1983 ,金红石化学分析方法 EDTA容量法测定氧化铝量

本标准适用于高钛渣、金红石中氧化铝量的测定。测定范围:0.50~5.00%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The EDTA volumetric method for the determination of aluminium oxide content

GB/T 4102.3-1983 ,金红石化学分析方法 萃取钼蓝光度法测定磷量

本标准适用于高钛渣、金红石中磷的测定。测定范围:0.001~0.100%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The extraction-molybdenum blue photometric method for the determination of phosphorus content

GB/T 4102.4-1983 ,金红石化学分析方法 燃烧-库仑法测定碳量

本标准适用于高钛渣、金红石中碳量的测定。测定范围:0.010~0.500%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The direct combustion-coulometric method for the determination of total carbon content

GB/T 4102.1-1983 ,金红石化学分析方法 硫酸铁铵容量法测定二氧化

本标准适用于高钛渣、金红石中二氧化钛量的测定。测定范围:70.0%以上。 本标准不适用于含锡、铬、钒量各大于0.25mg的试液中二氧化钛的测定。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The ammonium ferric sulfate volumetric method for the determination of titanium dioxide content

YS/T 514.4-2006 、金红石化学分析方法 燃烧-库仑法测定碳量

High titanium slag, rutile chemical analysis method Combustion-Coulometric method to determine carbon content

GB/T 4102.7-1983 ,金红石化学分析方法 重量法测定二氧化硅量

本标准适用于高钛渣、金红石中二氧化硅量的测定。测定范围:1.00~10.00%。 本标准遵守GB1467-78《冶金产品化学分析方法标准的总则及一般规定

Methods for chemical analysis of high-titanium slag and rutile--The gravimetric method for the determination of silicon dioxide content

YS/T 514.2-2006 、金红石化学分析方法 重铬酸钾容量法测定全铁量

High titanium slag, rutile chemical analysis method Potassium dichromate volumetric method for determination of total iron content

YS/T 514.6-2006 、金红石化学分析方法 硫酸钡重量法测定硫量

High titanium slag, rutile chemical analysis method barium sulfate gravimetric method for determination of sulfur content

YS/T 514.7-2006 、金红石化学分析方法 重量法测定二氧化硅量

High titanium slag, rutile chemical analysis method gravimetric determination of silicon dioxide content

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具CMA/CNAS权威检测报告,支持电子版与纸质版,快递送达。