危险场所用电气设备检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

UL 2279-1996 2级、0、1和2区

other UL Standards for equipment for use in Class I,Division 1 and 2 hazardous(classified)locations 1.1.1 added September 4 1998 1.2

UL Standard for Safety Electrical Equipment for Use in Class I, Zone 0, 1, and 2 Hazardous (Classified) Locations First Edition; Reprint with Revisions Through and Including December 6, 2001

UL 1604-1994 2类1级、2级和3级

1.1 These requirements apply to equipment, circuits, or components intended for use in Class I, Groups A, B, C, and D, Division 2, hazardous

UL Standard for Safety Electrical Equipment for Use in Class I and II, Division 2, and Class III Hazardous (Classified) Locations Third Edition;Reprinted With Revisions Through and Including 2/3/2004

ANSI/ISA S12.26.01-1998 I级1区:保护型号.油浸"O"型

Specifies requirements for construction and testing of oil-immersed electrical apparatus, oil-immersed parts of electrical apparatus, and Ex

Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Oil Immersion "o"

ANSI/ISA S12.25.01-1998 I级1区:保护型号.粉末填充"q"型

Contains specific requirements for construction testing, and marking of electrical apparatus, parts of electrical apparatus, and Ex components

Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Powder Filling "q"

ANSI/ISA 12.10.05-2004 20区、21区和22区.20区、21区和22区分类

This standard is concerned with the classification of areas where explosive dust/air mixtures and combustible dust layers are present, in order

Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Classification of Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations (IEC 61241-10 Mod)

0 爆炸体环境.第17部分:的检验和保养

CSA C22.2 NO.213-M1987-1987 类第 2 类非燃烧(第一版)

Appareils électriques non incendiaires pour emplacements dangereux de classe I, division 2 (première édition)

ANSI/ISA 12.10.02-2006 20区、21区和22区(已分类).一般要求

This standard specifies the general requirements for design, construction, testing and marking, which is applicable to electrical apparatus protected

Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - General Requirements

ANSI/ISA 61241-2-2007 21区和22区(分类的).增压"pD"型防护

This standard gives requirements on the design, construction, testing and marking of electrical apparatus for use in combustible dust atmospheres

Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Pressurization "pD"

JUS N.S8.010-1987 潜在爆炸体环境装置.爆炸物的分类

Electrical apparatus for explosive gas atmosphere. Electrical eguipment for use in areas with explosives

ANSI/ISA 61241-18-2007 20区,21区和22区(分类的).封装"mD"型防护

This standard is applicable to electrical apparatus protected by encapsulation type of protection "mD" and surface temperature limitation for use

Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Encapsulation "mD"

ANSI/ISA 61241-1-2007 20区、21区和22区(分类的).外壳"tD"型防护

This standard is applicable to electrical apparatus protected by enclosures and surface temperature limitation for use in explosive dust atmospheres

Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Enclosures "tD"

ANSI/ISA 60079-7(12.16.01)-2008 I类1区(已分类).保护类型.安全性增强"e"型

Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety "e"

ANSI/ISA 60079-7-2008 I类1区(已分类).保护类型.安全性增强"e"型

This standard specifies the requirements for the design, construction, testing and marking of electrical apparatus with type of protection increased

Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety "e"

ANSI/ISA 61241-11-2007 20区,21区和22区(分类的).原有安全度"iD"型防护

This standard specifies requirements for the construction and testing of intrinsically safe apparatus intended for use in an explosive dust atmosphere

Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Intrinsic Safety "iD"

UL 2279-1996 2级、0、1和2区

other UL Standards for equipment for use in Class I,Division 1 and 2 hazardous(classified)locations 1.1.1 added September 4 1998 1.2

UL Standard for Safety Electrical Equipment for Use in Class I, Zone 0, 1, and 2 Hazardous (Classified) Locations First Edition; Reprint with Revisions Through and Including December 6, 2001

UL 1604-1994 2类1级、2级和3级

1.1 These requirements apply to equipment, circuits, or components intended for use in Class I, Groups A, B, C, and D, Division 2, hazardous

UL Standard for Safety Electrical Equipment for Use in Class I and II, Division 2, and Class III Hazardous (Classified) Locations Third Edition;Reprinted With Revisions Through and Including 2/3/2004

ANSI/ISA S12.26.01-1998 I级1区:保护型号.油浸"O"型

Specifies requirements for construction and testing of oil-immersed electrical apparatus, oil-immersed parts of electrical apparatus, and Ex

Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Oil Immersion "o"

ANSI/ISA S12.25.01-1998 I级1区:保护型号.粉末填充"q"型

Contains specific requirements for construction testing, and marking of electrical apparatus, parts of electrical apparatus, and Ex components

Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Powder Filling "q"

ANSI/ISA 12.10.05-2004 20区、21区和22区.20区、21区和22区分类

This standard is concerned with the classification of areas where explosive dust/air mixtures and combustible dust layers are present, in order

Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Classification of Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations (IEC 61241-10 Mod)

0 爆炸体环境.第17部分:的检验和保养

CSA C22.2 NO.213-M1987-1987 类第 2 类非燃烧(第一版)

Appareils électriques non incendiaires pour emplacements dangereux de classe I, division 2 (première édition)

ANSI/ISA 12.10.02-2006 20区、21区和22区(已分类).一般要求

This standard specifies the general requirements for design, construction, testing and marking, which is applicable to electrical apparatus protected

Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - General Requirements

ANSI/ISA 61241-2-2007 21区和22区(分类的).增压"pD"型防护

This standard gives requirements on the design, construction, testing and marking of electrical apparatus for use in combustible dust atmospheres

Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Pressurization "pD"

JUS N.S8.010-1987 潜在爆炸体环境装置.爆炸物的分类

Electrical apparatus for explosive gas atmosphere. Electrical eguipment for use in areas with explosives

ANSI/ISA 61241-18-2007 20区,21区和22区(分类的).封装"mD"型防护

This standard is applicable to electrical apparatus protected by encapsulation type of protection "mD" and surface temperature limitation for use

Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Encapsulation "mD"

ANSI/ISA 61241-1-2007 20区、21区和22区(分类的).外壳"tD"型防护

This standard is applicable to electrical apparatus protected by enclosures and surface temperature limitation for use in explosive dust atmospheres

Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Enclosures "tD"

ANSI/ISA 60079-7(12.16.01)-2008 I类1区(已分类).保护类型.安全性增强"e"型

Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety "e"

ANSI/ISA 60079-7-2008 I类1区(已分类).保护类型.安全性增强"e"型

This standard specifies the requirements for the design, construction, testing and marking of electrical apparatus with type of protection increased

Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety "e"

ANSI/ISA 61241-11-2007 20区,21区和22区(分类的).原有安全度"iD"型防护

This standard specifies requirements for the construction and testing of intrinsically safe apparatus intended for use in an explosive dust atmosphere

Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Intrinsic Safety "iD"

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具CMA/CNAS权威检测报告,支持电子版与纸质版,快递送达。