医用防护类服装、隔离类用单检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

T/CTES 1013-2019 医用防护类服装、隔离类用单分级和性能技术规范

本标准规定了医用防护类服装和隔离类用单的分级、性能的最低要求、试验方法、标志、包装、运输和贮存。 本标准适用于为医务人员在工作时接触具有潜在感染性患者的血液、体液、分泌物、空气中的气溶胶、颗粒物等提供阻隔、防护作用的防护类服装和隔离类用单。 本标准不适用于手部的防护,如手术手套、检查手套和其它

Medical protective clothing, single classification and performance technical specifications for isolation

T/CSBME 017-2020 一次性医用防护隔离衣

本标准规定了一次性医用防护隔离衣产品(以下简称“防护隔离衣”)的级别划分、性能要求及试验方法。其中对于一次性医用防护隔离衣的结构、外观、基本性能、表面抗湿性、微生物指标、环氧乙烷残留量、相应的试验方法、标志、包装、运输和贮存等作出了相关规定

Disposable protective medical isolation gown

T/GZZB 001-2020 防雾医用隔离眼罩(护目镜)

可见光透光率★ 应不小于85 % 可见光雾度★ 应不大于2 % 耐温性能 应明显变色、鼓泡、变形、破裂等现象 跌落性能 从高处自由跌落,应影响使用的明显破损现象 雾滴防护性能 若镜片中心范围内试纸色斑出现,则认为合格 镜片屈光度★ 屈光度互差为 

Medical isolation eye-protection

GB 24540-2009 防护服装.酸碱类化学品防护服

本标准规定了酸碱类化学品防护服的分级、技术要求、测试方法、检验规则及标识等。 本标准适用于工业作业场所作业从员使用的防护液态酸碱类化学品的防护服。 不适用于消防、应急救援等作业场所使用的酸碱类化学品的防护服。不适用于针对氢氟酸、氨水、有机酸碱的防护服

Protective clothing.Protective clothing against liquid acids and alkalis

BS EN ISO 11611:2008 焊接和类似工艺用防护服装

Protective clothing for use in welding and allied processes

ISO 11611:2007 焊接和类似工艺用防护服装

This International Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves

Protective clothing for use in welding and allied processes

ISO 11611:2015 焊接和类似工艺用防护服装

This International Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves

Protective clothing for use in welding and allied processes

SIS SS 88 23 32-1989 防护服.防燃服装材料分类

I denna standard anges fordringar p? och klassificering av ant?ndligheten hos bekl?dnadsmaterial. Klasserna 3 till 5 ?r avsedda f?r skydds- och

Protective clothing — Protection against ignition of clothing materials — Classification

SIS SS 88 23 30-1989 防护服.防火服装材料.分类

I denna standard anges fordringar p? och klassificering av skydd mot flammkontakt hos enskilda eller kombinerade skikt av bekl?dnadsmaterial avsedda f

Protective clothing — Protection against flame of clothing materials — Classification

DS/INSTA 677:1989 防护服.防燃服装材料.分类

Denne standard indeholder krav til samt en klassificering af bekl?dningsmaterialers ant?ndelighed. Klasserne 3 til 5 er beregnet til beskyttelses- og

Protective clothing against heat and fire. Resistance against ignition of clothing materials. Classification

ANSI/AAMI PB70-2012 用于医疗保健设施的防护服和窗帘的液体阻隔性能和分类

This standard establishes a system of classification for protective apparel and drapes used in health care facilities based on their liquid barrier

Liquid barrier performance and classification of protective apparel and drapes intended for use in health care facilities

SIS SS 88 23 31-1989 防护服.热辐射防护服装材料.分类

I denna standard anges fordringar p? och klassificering av skydd mot v?rmest?lning hos enskilda eller kombinerade skikt av bekl?dnadsmaterial f?r

Protective clothing — Protection against heat radiation of clothing materials — Classification

BS EN ISO 11612:2009 防护服装 隔热和阻燃防护服装

Protective clothing. Clothing to protect against heat and flame

ISO 11612:2008 防护服装.隔热和阻燃防护服装

Protective clothing - Clothing to protect against heat and flame

BS EN ISO 11612:2008 防护服装.隔热和阻燃防护服装

Protective clothing - Clothing to protect against heat and flame

T/CTES 1013-2019 医用防护类服装、隔离类用单分级和性能技术规范

本标准规定了医用防护类服装和隔离类用单的分级、性能的最低要求、试验方法、标志、包装、运输和贮存。 本标准适用于为医务人员在工作时接触具有潜在感染性患者的血液、体液、分泌物、空气中的气溶胶、颗粒物等提供阻隔、防护作用的防护类服装和隔离类用单。 本标准不适用于手部的防护,如手术手套、检查手套和其它

Medical protective clothing, single classification and performance technical specifications for isolation

T/CSBME 017-2020 一次性医用防护隔离衣

本标准规定了一次性医用防护隔离衣产品(以下简称“防护隔离衣”)的级别划分、性能要求及试验方法。其中对于一次性医用防护隔离衣的结构、外观、基本性能、表面抗湿性、微生物指标、环氧乙烷残留量、相应的试验方法、标志、包装、运输和贮存等作出了相关规定

Disposable protective medical isolation gown

T/GZZB 001-2020 防雾医用隔离眼罩(护目镜)

可见光透光率★ 应不小于85 % 可见光雾度★ 应不大于2 % 耐温性能 应明显变色、鼓泡、变形、破裂等现象 跌落性能 从高处自由跌落,应影响使用的明显破损现象 雾滴防护性能 若镜片中心范围内试纸色斑出现,则认为合格 镜片屈光度★ 屈光度互差为 

Medical isolation eye-protection

GB 24540-2009 防护服装.酸碱类化学品防护服

本标准规定了酸碱类化学品防护服的分级、技术要求、测试方法、检验规则及标识等。 本标准适用于工业作业场所作业从员使用的防护液态酸碱类化学品的防护服。 不适用于消防、应急救援等作业场所使用的酸碱类化学品的防护服。不适用于针对氢氟酸、氨水、有机酸碱的防护服

Protective clothing.Protective clothing against liquid acids and alkalis

BS EN ISO 11611:2008 焊接和类似工艺用防护服装

Protective clothing for use in welding and allied processes

ISO 11611:2007 焊接和类似工艺用防护服装

This International Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves

Protective clothing for use in welding and allied processes

ISO 11611:2015 焊接和类似工艺用防护服装

This International Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves

Protective clothing for use in welding and allied processes

SIS SS 88 23 32-1989 防护服.防燃服装材料分类

I denna standard anges fordringar p? och klassificering av ant?ndligheten hos bekl?dnadsmaterial. Klasserna 3 till 5 ?r avsedda f?r skydds- och

Protective clothing — Protection against ignition of clothing materials — Classification

SIS SS 88 23 30-1989 防护服.防火服装材料.分类

I denna standard anges fordringar p? och klassificering av skydd mot flammkontakt hos enskilda eller kombinerade skikt av bekl?dnadsmaterial avsedda f

Protective clothing — Protection against flame of clothing materials — Classification

DS/INSTA 677:1989 防护服.防燃服装材料.分类

Denne standard indeholder krav til samt en klassificering af bekl?dningsmaterialers ant?ndelighed. Klasserne 3 til 5 er beregnet til beskyttelses- og

Protective clothing against heat and fire. Resistance against ignition of clothing materials. Classification

ANSI/AAMI PB70-2012 用于医疗保健设施的防护服和窗帘的液体阻隔性能和分类

This standard establishes a system of classification for protective apparel and drapes used in health care facilities based on their liquid barrier

Liquid barrier performance and classification of protective apparel and drapes intended for use in health care facilities

SIS SS 88 23 31-1989 防护服.热辐射防护服装材料.分类

I denna standard anges fordringar p? och klassificering av skydd mot v?rmest?lning hos enskilda eller kombinerade skikt av bekl?dnadsmaterial f?r

Protective clothing — Protection against heat radiation of clothing materials — Classification

BS EN ISO 11612:2009 防护服装 隔热和阻燃防护服装

Protective clothing. Clothing to protect against heat and flame

ISO 11612:2008 防护服装.隔热和阻燃防护服装

Protective clothing - Clothing to protect against heat and flame

BS EN ISO 11612:2008 防护服装.隔热和阻燃防护服装

Protective clothing - Clothing to protect against heat and flame

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

⏱

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

➔
02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

➔
03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

➔
04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

➔
05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通