塔式起重机 起升机构检测

JB/T 11156-2011 塔式起重机.起升机构

本标准规定了塔式起重机用起升机构（以下简称“机构”）的术语和定义、技术要求、安全要求、使用与维护、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于GB/T 6974.3所定义的塔式起重机用电动机驱动的起升机构

Tower cranes.Hoisting winch

AS 1418.4:2004 起重机、升降机和绞车.塔式起重机

Cranes, hoists and winches - Tower cranes

T/CCMA 0086-2020 塔式起重机 起升钢丝绳

本标准规定了塔式起重机起升钢丝绳的术语和定义、分类和标记、订货内容、材料、技术要求、检查、试验、检验规则、验收方法、包装、标志和质量证明书、使用安全。 　　本标准适用于多层缠绕的塔式起重机起升钢丝绳，其它类似用途钢丝绳（如动臂变幅钢丝绳）可参照使用

Hoisting ropes for tower cranes

AS 2550.20:2005 起重机、提升机和绞车.安全使用.自升式塔式起重机

Specifies requirements for the safe use of self-erecting tower cranes, covering planning, selection, siting, installation, maintenance, inspection

Cranes, hoists and winches - Safe use - Self-erecting tower cranes

PREN 14439-2018 起重机 塔式起重机

This document specifies safety requirements: ?? for tower cranes; ?? for climbing systems used with the masts of tower cranes; ?? for the installation

Cranes - Tower cranes

OENORM EN 14439-2021 起重机 塔式起重机

Cranes - Tower cranes

prEN 14439-2021 起重机 塔式起重机

Cranes - Tower cranes

DIN EN 14439:2018 起重机 塔式起重机

Cranes - Tower cranes; German and English version prEN 14439:2018

DIN EN 14439:2021-10 起重机 塔式起重机

Cranes - Tower cranes; German and English version prEN 14439:2021 / Note: Date of issue 2021-08-27*Intended as replacement for DIN EN 14439 (2010-03).

TCVN 5208-3-2008 起重机.机构要求.第3部分:塔式起重机

Cranes.Requirements for mechanisms.Part 3: Tower cranes

KS B ISO 10972-3:2015 起重机.机构要求.第3部分:塔式起重机

Cranes — Requirements for mechanisms — Part 3: Tower cranes

ISO 10972-3:2003 起重机.机构要求.第3部分:塔式起重机

This part of ISO 10972 establishes requirements which apply specifically to the mechanisms and related components of tower cranes, in addition

Cranes - Requirements for mechanisms - Part 3: Tower cranes

KS B ISO 10972-3:2004 起重机.机构要求.第3部分:塔式起重机

이 규격은 KS B ISO 10972-1에 규정한 일반적 요구 사항에 덧붙여 타워 크레

Cranes-Requirements for mechanisms-Part 3:Tower cranes

SANS 10972-3:2007 起重机.机构要求.第3部分:塔式起重机

Establishes requirements which apply specifically to the mechanisms and related components of tower cranes, in addition to the general requirements

Cranes - Requirements for mechanisms Part 3: Tower cranes

ASME B30.4-1981 门式起重机、塔式起重机和基座式起重机

Portal, Tower, and Pedestal Cranes

JB/T 11156-2011 塔式起重机.起升机构

本标准规定了塔式起重机用起升机构（以下简称“机构”）的术语和定义、技术要求、安全要求、使用与维护、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于GB/T 6974.3所定义的塔式起重机用电动机驱动的起升机构

Tower cranes.Hoisting winch

AS 1418.4:2004 起重机、升降机和绞车.塔式起重机

Cranes, hoists and winches - Tower cranes

T/CCMA 0086-2020 塔式起重机 起升钢丝绳

本标准规定了塔式起重机起升钢丝绳的术语和定义、分类和标记、订货内容、材料、技术要求、检查、试验、检验规则、验收方法、包装、标志和质量证明书、使用安全。 　　本标准适用于多层缠绕的塔式起重机起升钢丝绳，其它类似用途钢丝绳（如动臂变幅钢丝绳）可参照使用

Hoisting ropes for tower cranes

AS 2550.20:2005 起重机、提升机和绞车.安全使用.自升式塔式起重机

Specifies requirements for the safe use of self-erecting tower cranes, covering planning, selection, siting, installation, maintenance, inspection

Cranes, hoists and winches - Safe use - Self-erecting tower cranes

PREN 14439-2018 起重机 塔式起重机

This document specifies safety requirements: ?? for tower cranes; ?? for climbing systems used with the masts of tower cranes; ?? for the installation

Cranes - Tower cranes

OENORM EN 14439-2021 起重机 塔式起重机

Cranes - Tower cranes

prEN 14439-2021 起重机 塔式起重机

Cranes - Tower cranes

DIN EN 14439:2018 起重机 塔式起重机

Cranes - Tower cranes; German and English version prEN 14439:2018

DIN EN 14439:2021-10 起重机 塔式起重机

Cranes - Tower cranes; German and English version prEN 14439:2021 / Note: Date of issue 2021-08-27*Intended as replacement for DIN EN 14439 (2010-03).

TCVN 5208-3-2008 起重机.机构要求.第3部分:塔式起重机

Cranes.Requirements for mechanisms.Part 3: Tower cranes

KS B ISO 10972-3:2015 起重机.机构要求.第3部分:塔式起重机

Cranes — Requirements for mechanisms — Part 3: Tower cranes

ISO 10972-3:2003 起重机.机构要求.第3部分:塔式起重机

This part of ISO 10972 establishes requirements which apply specifically to the mechanisms and related components of tower cranes, in addition

Cranes - Requirements for mechanisms - Part 3: Tower cranes

KS B ISO 10972-3:2004 起重机.机构要求.第3部分:塔式起重机

이 규격은 KS B ISO 10972-1에 규정한 일반적 요구 사항에 덧붙여 타워 크레

Cranes-Requirements for mechanisms-Part 3:Tower cranes

SANS 10972-3:2007 起重机.机构要求.第3部分:塔式起重机

Establishes requirements which apply specifically to the mechanisms and related components of tower cranes, in addition to the general requirements

Cranes - Requirements for mechanisms Part 3: Tower cranes

ASME B30.4-1981 门式起重机、塔式起重机和基座式起重机

Portal, Tower, and Pedestal Cranes