密集波分复用(DWDM)滤波器检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

GB/T 28511.2-2012 平面光成光路件.第2部:基于阵列导光栅(AWG)技术的DWDM

GB/T 28511的本部分规定了基于阵列波导光栅(AWG)技术的密集波分复用(DWDM)滤波器(以下简称AWG滤波器)的相关术语和定义、技术要求和测试方法;规定了可靠性试验的条件和要求、检验规则及标志、包装、运输和贮存要求。 本部分适用于平面光波导集成光路器件中的AWG滤波器

Integrated optical path devices based on planar lightwave circuit.Part 2:DWDM filter based on AWG technology

YD/T 2000.2-2009 平面光成光路件 第2部:基于阵列导光栅(AWG)技术的(DWDM)

本部分规定了基于AWG(阵列波导光栅)技术的密集波分复用(DWDM)滤波器的相关术语和定义、技术要求和测试方法;规定了可靠性试验条件和要求、检验规则及标志、包装、贮存等要求。 本部分适用于平面光波导集成光路器件中的AWG滤波器

Integrated optical path devices based on planar lightwave circuit.Part 2:DWDM filter based on AWG technology

YD/T 2000.2-2018 平面光成光路件 第2部:基于阵列导光栅(AWG)技术的DWDM

Planar optical waveguide integrated optical circuit device Part 2: Dense wavelength division multiplexing (DWDM) filter based on arrayed waveguide grating (AWG) technology

ITU-T G.696.1-2010 纵向兼容域内(DWDM)应

This Recommendation provides physical layer specifications for intra-domain (IaD) DWDM optical networking applications. These specifications

Longitudinally compatible intra-domain DWDM applications

JIS C 5925-5:2013 非连接单模式光纤中尺度1xN(DWDM)设备

Non-connectorized single-mode fibre optics middle-scale 1xN DWDM devices

RFC 8363-2018 支持 Flexi-Grid DWDM)网络的 GMPLS OSPF-TE 扩展

"The International Telecommunication Union Telecommunication standardization sector (ITU-T) has extended its Recommendations G.694.1 and G.872

GMPLS OSPF-TE Extensions in Support of Flexi-Grid Dense Wavelength Division Multiplexing (DWDM) Networks

GB/T 20440-2006 /解技术条件

本标准规定了密集型波分复用器/解复用器(以下简称DWDM器件)的相关定义和分类、技术要求和试验方法;规定了检验规则及标识、包装、运输和贮存要求。 本标准适用于密集型波分复用器/解复用器(DWDM器件

Technical requirements of dense wavelength division multiplexer/demultiplexer

RFC 7792-2016 支持 Flexi-Grid DWDM)网络的 RSVP-TE 信令扩展

This memo describes the extensions to the Resource Reservation Protocol - Traffic Engineering (RSVP-TE) signaling protocol to support Label Switched

RSVP-TE Signaling Extensions in Support of Flexi-Grid Dense Wavelength Division Multiplexing (DWDM) Networks

RFC 4209-2005 DWDM)光线路系统的链路管理协议(LMP)

"The Link Management Protocol (LMP) is defined to manage traffic engineering (TE) links. In its present form@ LMP focuses on peer nodes@ i.e.@ nodes

Link Management Protocol (LMP) for Dense Wavelength Division Multiplexing (DWDM) Optical Line Systems

YD/T 1714-2007 光配线架

本标准规定了密集波分复用(DWDM)环境下光纤配线架(以下简称ODF)的定义、技术要求、产品分类、试验方法、检验规则、标志、包装和贮存. 本标准适用于密集波分复用环境下的光配线架

Optical Fibers Distribution Frame in Dense Wavelength Division Multiplexing

YD/T 4020.1-2022 城域接入单纤双向 第1部DWDM

Single-fiber bidirectional wavelength division multiplexer for metropolitan area access Part 1: DWDM

ITU-T G.698.1-2009 (预发布)含有单通道光学接口的多通道(DWDM)应

Recommendation ITU-T G.698.1 provides optical parameter values for physical layer interfaces of dense wavelength division multiplexing (DWDM) systems

(Pre-Published) Multichannel DWDM applications with single-channel optical interfaces

ITU-T G.698.2-2009 含有单通道光学接口的增强型多通道(DWDM)应

This Recommendation provides optical parameter values for physical layer interfaces of dense wavelength division multiplexing (DWDM) systems primarily

Amplified multichannel dense wavelength division multiplexing applications with single channel optical interfaces (Study Group 15)

YD/T 1320-2004 光/去技术要求和试验方法

Technical requirements and tests methods of optical Dense Wavelength Division Multiplexer/demultiplexer

ITU-T G.698.3-2012 使单信道光接口的多通道(DWDM)应程序.15号研究组

The purpose of this Recommendation is to provide optical interface specifications towards the realization of transversely compatible seeded dense

Multichannel seeded DWDM applications with single-channel optical interfaces (Study Group 15)

GB/T 28511.2-2012 平面光成光路件.第2部:基于阵列导光栅(AWG)技术的DWDM

GB/T 28511的本部分规定了基于阵列波导光栅(AWG)技术的密集波分复用(DWDM)滤波器(以下简称AWG滤波器)的相关术语和定义、技术要求和测试方法;规定了可靠性试验的条件和要求、检验规则及标志、包装、运输和贮存要求。 本部分适用于平面光波导集成光路器件中的AWG滤波器

Integrated optical path devices based on planar lightwave circuit.Part 2:DWDM filter based on AWG technology

YD/T 2000.2-2009 平面光成光路件 第2部:基于阵列导光栅(AWG)技术的(DWDM)

本部分规定了基于AWG(阵列波导光栅)技术的密集波分复用(DWDM)滤波器的相关术语和定义、技术要求和测试方法;规定了可靠性试验条件和要求、检验规则及标志、包装、贮存等要求。 本部分适用于平面光波导集成光路器件中的AWG滤波器

Integrated optical path devices based on planar lightwave circuit.Part 2:DWDM filter based on AWG technology

YD/T 2000.2-2018 平面光成光路件 第2部:基于阵列导光栅(AWG)技术的DWDM

Planar optical waveguide integrated optical circuit device Part 2: Dense wavelength division multiplexing (DWDM) filter based on arrayed waveguide grating (AWG) technology

ITU-T G.696.1-2010 纵向兼容域内(DWDM)应

This Recommendation provides physical layer specifications for intra-domain (IaD) DWDM optical networking applications. These specifications

Longitudinally compatible intra-domain DWDM applications

JIS C 5925-5:2013 非连接单模式光纤中尺度1xN(DWDM)设备

Non-connectorized single-mode fibre optics middle-scale 1xN DWDM devices

RFC 8363-2018 支持 Flexi-Grid DWDM)网络的 GMPLS OSPF-TE 扩展

"The International Telecommunication Union Telecommunication standardization sector (ITU-T) has extended its Recommendations G.694.1 and G.872

GMPLS OSPF-TE Extensions in Support of Flexi-Grid Dense Wavelength Division Multiplexing (DWDM) Networks

GB/T 20440-2006 /解技术条件

本标准规定了密集型波分复用器/解复用器(以下简称DWDM器件)的相关定义和分类、技术要求和试验方法;规定了检验规则及标识、包装、运输和贮存要求。 本标准适用于密集型波分复用器/解复用器(DWDM器件

Technical requirements of dense wavelength division multiplexer/demultiplexer

RFC 7792-2016 支持 Flexi-Grid DWDM)网络的 RSVP-TE 信令扩展

This memo describes the extensions to the Resource Reservation Protocol - Traffic Engineering (RSVP-TE) signaling protocol to support Label Switched

RSVP-TE Signaling Extensions in Support of Flexi-Grid Dense Wavelength Division Multiplexing (DWDM) Networks

RFC 4209-2005 DWDM)光线路系统的链路管理协议(LMP)

"The Link Management Protocol (LMP) is defined to manage traffic engineering (TE) links. In its present form@ LMP focuses on peer nodes@ i.e.@ nodes

Link Management Protocol (LMP) for Dense Wavelength Division Multiplexing (DWDM) Optical Line Systems

YD/T 1714-2007 光配线架

本标准规定了密集波分复用(DWDM)环境下光纤配线架(以下简称ODF)的定义、技术要求、产品分类、试验方法、检验规则、标志、包装和贮存. 本标准适用于密集波分复用环境下的光配线架

Optical Fibers Distribution Frame in Dense Wavelength Division Multiplexing

YD/T 4020.1-2022 城域接入单纤双向 第1部DWDM

Single-fiber bidirectional wavelength division multiplexer for metropolitan area access Part 1: DWDM

ITU-T G.698.1-2009 (预发布)含有单通道光学接口的多通道(DWDM)应

Recommendation ITU-T G.698.1 provides optical parameter values for physical layer interfaces of dense wavelength division multiplexing (DWDM) systems

(Pre-Published) Multichannel DWDM applications with single-channel optical interfaces

ITU-T G.698.2-2009 含有单通道光学接口的增强型多通道(DWDM)应

This Recommendation provides optical parameter values for physical layer interfaces of dense wavelength division multiplexing (DWDM) systems primarily

Amplified multichannel dense wavelength division multiplexing applications with single channel optical interfaces (Study Group 15)

YD/T 1320-2004 光/去技术要求和试验方法

Technical requirements and tests methods of optical Dense Wavelength Division Multiplexer/demultiplexer

ITU-T G.698.3-2012 使单信道光接口的多通道(DWDM)应程序.15号研究组

The purpose of this Recommendation is to provide optical interface specifications towards the realization of transversely compatible seeded dense

Multichannel seeded DWDM applications with single-channel optical interfaces (Study Group 15)

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验