道路与公共场所照明灯具检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

AS/NZS 1158.6:2004

This Standard applies to all luminaires, with or without integral control gear, which are intended for use in Category V lighting schemes

Lighting for roads and public spaces - Luminaires

SA/SNZ TS 1158.6-2015 第6部分:性能

Lighting for roads and public spaces Part 6: Luminaires-Performance

AS/NZS 1158.4:2015 人行横

Specifies performance requirements for designers of pedestrian crossings and manufacturers of luminaires in order to enhance the visibility and safety

AS/NZS 1158.0:2005 .介绍

Serves as a general introduction to the AS/NZS 1158 series and provides definitions of lighting categories and technical terms essential

Lighting for roads and public spaces - Introduction

AS/NZS 1158.5:2014 和地下通

Specifies performance and design requirements for lighting schemes for tunnels and underpasses. It also specifies the luminaire data and other design

AS/NZS 1158.4:2009 .第4部分:人行横

This Standard specifies performance requirements for the lighting of pedestrian crossings. The requirements generally assume that the pedestrian

Lighting for roads and public spaces Part 4: Lighting of pedestrian crossings

JT/T 609-2004

本标准规定了公路隧道照明灯具的分类与命名、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以荧光灯、钠灯等气体放电灯为光源的公路隧道用照明灯具。隧道用其他灯具可参照执行

Highway tunnel lighting luminaires

JT/T 939.2-2014 LED? 第2部分:LED

JT/T 939的本部分规定了公路隧道LED照明灯具的组成、分类与型号、技术要求、试验方法、检验规则以及标志、包装、运输和储存。 本部分适用于公路隧道LED照明灯具,其他隧道照明灯具可参照使用

LED lighting luminaires for highway.Part 2: Highway tunnel LED lighting luminaires

JT/T 609-2022

本标准适用于公路隧道照明灯具的生产、检验和使用

Highway tunnel lighting fixtures

UNI 11095-2021

Light and lighting - Road tunnel lighting

TIS 904-1989 标准

Standard for luminaires for road and street lighting

DB35/T 1307-2012 用LED

本标准规定了高速公路隧道照明用的LED 灯具(以下简称“LED隧道灯”)的工作环境、技术要求、试验方法、检验规则、标志、包装和贮运。 本标准适用于工作电源电压不超过1000V、频率为50Hz或60Hz交流电源的公路隧道照明用LED灯具。 用于其他隧道场所照明的LED灯具也可参照使用

LED lamps for highway tunnel lighting

AS/NZS 1158.3.1:2005 .人行区域(P类).性能和设计要求

Specifies performance and design requirements for Category P lighting schemes as described in AS/NZS 1158.0. Also specifies data needed to design

Lighting for roads and public spaces - Pedestrian area (Category P) lighting - Performance and design requirements

AS/NZS 1158 Set:2007 (以光盘形式提供全套)

Lighting for roads and public spaces Set on CD

CNS 9118-1982

Roadway Lighting Fittings for Traffic Route

AS/NZS 1158.6:2004

This Standard applies to all luminaires, with or without integral control gear, which are intended for use in Category V lighting schemes

Lighting for roads and public spaces - Luminaires

SA/SNZ TS 1158.6-2015 第6部分:性能

Lighting for roads and public spaces Part 6: Luminaires-Performance

AS/NZS 1158.4:2015 人行横

Specifies performance requirements for designers of pedestrian crossings and manufacturers of luminaires in order to enhance the visibility and safety

AS/NZS 1158.0:2005 .介绍

Serves as a general introduction to the AS/NZS 1158 series and provides definitions of lighting categories and technical terms essential

Lighting for roads and public spaces - Introduction

AS/NZS 1158.5:2014 和地下通

Specifies performance and design requirements for lighting schemes for tunnels and underpasses. It also specifies the luminaire data and other design

AS/NZS 1158.4:2009 .第4部分:人行横

This Standard specifies performance requirements for the lighting of pedestrian crossings. The requirements generally assume that the pedestrian

Lighting for roads and public spaces Part 4: Lighting of pedestrian crossings

JT/T 609-2004

本标准规定了公路隧道照明灯具的分类与命名、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以荧光灯、钠灯等气体放电灯为光源的公路隧道用照明灯具。隧道用其他灯具可参照执行

Highway tunnel lighting luminaires

JT/T 939.2-2014 LED? 第2部分:LED

JT/T 939的本部分规定了公路隧道LED照明灯具的组成、分类与型号、技术要求、试验方法、检验规则以及标志、包装、运输和储存。 本部分适用于公路隧道LED照明灯具,其他隧道照明灯具可参照使用

LED lighting luminaires for highway.Part 2: Highway tunnel LED lighting luminaires

JT/T 609-2022

本标准适用于公路隧道照明灯具的生产、检验和使用

Highway tunnel lighting fixtures

UNI 11095-2021

Light and lighting - Road tunnel lighting

TIS 904-1989 标准

Standard for luminaires for road and street lighting

DB35/T 1307-2012 用LED

本标准规定了高速公路隧道照明用的LED 灯具(以下简称“LED隧道灯”)的工作环境、技术要求、试验方法、检验规则、标志、包装和贮运。 本标准适用于工作电源电压不超过1000V、频率为50Hz或60Hz交流电源的公路隧道照明用LED灯具。 用于其他隧道场所照明的LED灯具也可参照使用

LED lamps for highway tunnel lighting

AS/NZS 1158.3.1:2005 .人行区域(P类).性能和设计要求

Specifies performance and design requirements for Category P lighting schemes as described in AS/NZS 1158.0. Also specifies data needed to design

Lighting for roads and public spaces - Pedestrian area (Category P) lighting - Performance and design requirements

AS/NZS 1158 Set:2007 (以光盘形式提供全套)

Lighting for roads and public spaces Set on CD

CNS 9118-1982

Roadway Lighting Fittings for Traffic Route

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验