耐磨试验装置检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

BS EN ISO 6370-1:2021 搪瓷和瓷釉 性的测定

1   Scope This part of ISO 6370 specifies the requirements for the testing apparatus to be used for the determination of the resistance

Vitreous and porcelain enamels. Determination of the resistance to abrasion - Abrasion testing apparatus

DS/ISO 6370-1:2021 搪瓷和搪瓷《性的测定》第1部分:

Vitreous and porcelain enamels – Determination of the resistance to abrasion – Part 1: Abrasion testing apparatus

UNE-EN ISO 6370-1:2022 搪瓷和瓷釉 性的测定 第1部分:

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus (ISO 6370-1:1991)

JB/T 4278.4-1993 橡皮塑料电线电缆仪器设备检定方法

本标准规定了耐磨试验装置的检定项目与技术要求、检定用器具、检定方法和检定结果及处理。 本标准适用于编织软线耐磨试验装置的检定

Rubber plastic wire and cable test equipment verification method wear-resistant test device

DS/EN ISO 6370-1:2021 搪瓷和搪瓷“性的测定”第1部分:(ISO 6370-1:1991)

Vitreous and porcelain enamels – Determination of the resistance to abrasion – Part 1: Abrasion testing apparatus (ISO 6370-1:1991)

DIN EN ISO 6370-1:2021-12 搪瓷和瓷釉 - 性的测定 - 第 1 部分: (ISO 6370-1:1991)

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus (ISO 6370-1:1991); German version EN ISO 6370-1:2021

JB/T 4278.4-2011 橡皮塑料电线电缆仪器设备检定方法.第4部分:

JB/T 4278的本部分规定了耐磨试验装置的检定项目与技术要求、检定用器具、检定方法和检定结果及处理。 本部分适用于编织软线耐磨试验装置的检定

Verification procedure for test equipment of rubber plastic wire and cable.Part 4: Abrasion test device

BS EN ISO 12947-1:1999(2000 纺织品 马丁代尔法测定织物性 第1部分:马丁代尔

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1 : Martindale abrasion testing apparatus

NF EN ISO 12947-1:1999 纺织品 马丁代尔法测定织物性 第 1 部分:马丁代尔

Textiles - Détermination de la résistance à l'abrasion des étoffes par la méthode Martindale - Partie 1 : appareillage d'essai d'abrasion de Martindale

BS EN ISO 12947-1:1999 纺织品.用马丁代尔(Martindale)法对织物抗损性的测定.马丁代尔

This part of ISO 12947 specifies requirements for the Martindale testing apparatus and auxiliary materials for use in the test methods specified

Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Martindale abrasion testing apparatus

UNE-EN ISO 12947-1:1999 纺织品 用马丁代尔法测定织物的性 第1部分:马丁代尔(ISO 12947-1:1998)

TEXTILES - DETERMINATION OF ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 1: MARTINDALE ABRASION TESTING APPARTUS (ISO 12947-1:1998)

BS ISO 6370-1:2011 釉瓷和搪瓷.性的测定.

Vitreous and porcelain enamels. Determination of the resistance to abrasion. Abrasion testing apparatus

NF A05-002-1*NF EN ISO 6370-1:2021 搪瓷和搪瓷 性的测定 第1部分:

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1 : abrasion testing apparatus

ASTM D3886-22 纺织织物性的标准方法(充气隔膜

1.1 This test method2 covers the determination of the resistance to abrasion of woven and knitted textile fabrics, both conditioned and wet, using

Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)

KS K ISO 12947-1:2019 纺织品 - 通过Martindale方法确定织物的性第1部分Martindale

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus

BS EN ISO 6370-1:2021 搪瓷和瓷釉 性的测定

1   Scope This part of ISO 6370 specifies the requirements for the testing apparatus to be used for the determination of the resistance

Vitreous and porcelain enamels. Determination of the resistance to abrasion - Abrasion testing apparatus

DS/ISO 6370-1:2021 搪瓷和搪瓷《性的测定》第1部分:

Vitreous and porcelain enamels – Determination of the resistance to abrasion – Part 1: Abrasion testing apparatus

UNE-EN ISO 6370-1:2022 搪瓷和瓷釉 性的测定 第1部分:

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus (ISO 6370-1:1991)

JB/T 4278.4-1993 橡皮塑料电线电缆仪器设备检定方法

本标准规定了耐磨试验装置的检定项目与技术要求、检定用器具、检定方法和检定结果及处理。 本标准适用于编织软线耐磨试验装置的检定

Rubber plastic wire and cable test equipment verification method wear-resistant test device

DS/EN ISO 6370-1:2021 搪瓷和搪瓷“性的测定”第1部分:(ISO 6370-1:1991)

Vitreous and porcelain enamels – Determination of the resistance to abrasion – Part 1: Abrasion testing apparatus (ISO 6370-1:1991)

DIN EN ISO 6370-1:2021-12 搪瓷和瓷釉 - 性的测定 - 第 1 部分: (ISO 6370-1:1991)

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus (ISO 6370-1:1991); German version EN ISO 6370-1:2021

JB/T 4278.4-2011 橡皮塑料电线电缆仪器设备检定方法.第4部分:

JB/T 4278的本部分规定了耐磨试验装置的检定项目与技术要求、检定用器具、检定方法和检定结果及处理。 本部分适用于编织软线耐磨试验装置的检定

Verification procedure for test equipment of rubber plastic wire and cable.Part 4: Abrasion test device

NF EN ISO 12947-1:1999 纺织品 马丁代尔法测定织物性 第 1 部分:马丁代尔

Textiles - Détermination de la résistance à l'abrasion des étoffes par la méthode Martindale - Partie 1 : appareillage d'essai d'abrasion de Martindale

BS EN ISO 12947-1:1999(2000 纺织品 马丁代尔法测定织物性 第1部分:马丁代尔

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1 : Martindale abrasion testing apparatus

BS EN ISO 12947-1:1999 纺织品.用马丁代尔(Martindale)法对织物抗损性的测定.马丁代尔

This part of ISO 12947 specifies requirements for the Martindale testing apparatus and auxiliary materials for use in the test methods specified

Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Martindale abrasion testing apparatus

UNE-EN ISO 12947-1:1999 纺织品 用马丁代尔法测定织物的性 第1部分:马丁代尔(ISO 12947-1:1998)

TEXTILES - DETERMINATION OF ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 1: MARTINDALE ABRASION TESTING APPARTUS (ISO 12947-1:1998)

BS ISO 6370-1:2011 釉瓷和搪瓷.性的测定.

Vitreous and porcelain enamels. Determination of the resistance to abrasion. Abrasion testing apparatus

NF A05-002-1*NF EN ISO 6370-1:2021 搪瓷和搪瓷 性的测定 第1部分:

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1 : abrasion testing apparatus

ASTM D3886-22 纺织织物性的标准方法(充气隔膜

1.1 This test method2 covers the determination of the resistance to abrasion of woven and knitted textile fabrics, both conditioned and wet, using

Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)

KS K ISO 12947-1:2019 纺织品 - 通过Martindale方法确定织物的性第1部分Martindale

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验