机器人用薄壁密封轴承检测

JB/T 6636-1993 机器人用薄壁密封轴承

本标准规定了机器人用薄壁密封四点接触球轴承与薄壁密封交叉圆柱滚子轴承的代号方法、外形尺寸、技术要求、测量方法、检验规则，标志、包装、运输及贮存。 本标准适用于机器人轴承的生产、检验及用户选型验收

Thin wall sealed bearings for robots

JB/T 6636-2007 滚动轴承.机器人用薄壁密封轴承

本标准规定了机器人用薄壁密封四点接触球轴承与薄壁密封交叉圆柱滚子轴承的代号方法、外形尺寸、技术要求、测量方法、检验规则、标志和包装。 本标准适用于机器人轴承的生产检验和用户验收

Rolling bearings.Thin section sealed bearings for robots

TB/T 2876-1998 滑动轴承 薄壁轴瓦和薄壁筒形轴承的壁厚测量

本标准规定了适用于成品状态的薄壁轴瓦和薄壁筒形轴承总壁厚侧t的检验方法和计量器具。 本标准不适用于热塑性塑料单层筒形轴承的壁厚测量。 注册码：本标淮中的所有尺寸以mm为单位

Wall thickness measurement of thin-walled plain bearings and thin-walled cylindrical bearings

DIN ISO 12306:1998 关节轴承.薄壁半轴承和薄壁轴承衬的壁厚度的测量

The document describes in accordance with ISO 12301 the checking methods and measuring equipment used for measuring the total wall thickness

Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes (ISO 12306:1994)

KS B ISO 12306:2002 普通轴承.薄壁半轴承和薄壁衬套壁厚测量

이 규격 KS B ISO 12301에 따르는 완성된 상태의 얇은 벽 두께의 분할 베어링

Plain bearings－Measurement of wall thickness ofthin－walled half－bearings and thin－walled bushes

GOST ISO 12306-1996 普通轴承.薄壁半轴承和薄壁衬套壁厚测量

Plain bearings. Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

GB/T 18330-2001 滑动轴承 薄壁轴瓦和薄壁轴套的壁厚测量

本标准规定了薄壁轴瓦和薄壁轴套壁厚的测量方法和测量设备。 本标准不适用于热塑轴套

Plain bearings--Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

BS 7772:1994 滑动轴承.薄壁半轴承和薄壁衬套的壁厚测量

This International Standard describes in accordance with ISO 12301 the checking methods and measuring equip-ment used for measuring the total wall

Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

SANS 12306:2005 滑动轴承.薄壁半轴承及薄壁衬套的壁厚测量

Describes in accordance with SANS 12301 the checking methods and measuring equipment used for measuring the total wall thickness of thin-walled

Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

KS B ISO 12306-2002(2012 滑动轴承薄壁半轴承和薄壁衬套壁厚的测量

Plain bearings－Measurement of wall thickness ofthin－walled half－bearings and thin－walled bushes

TB/T 3020-2001 滑动轴承 薄壁轴承用多层材料

本标准规定了用于制造薄壁轴承(轴瓦、衬套、止推垫圈)的多层材料的要求。多层材料由钢背、轴承衬层(铸造的、烧结的、轧制复合的)与可能有的表面镀层等组成

Plain bearings Multilayer materials for thin-walled bearings

ISO 12306:1994 滑动轴承 薄壁轴瓦和薄壁轴套的壁厚测量

Describes in accordance with ISO 12301 the checking methods (line measurement around the circumference, line measurement in the axial direction, point

Plain bearings; measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

GB/T 34897-2017 滚动轴承 工业机器人RV减速器用精密轴承

Rolling bearings—Precision bearings for RV reducers of industrial robots

GB/T 18326-2022 滑动轴承 薄壁滑动轴承用多层材料

本文件规定了用于制造薄壁滑动轴承(轴瓦、轴套、止推垫圈)的多层材料的技术要求。多层材料由钢背、轴承材料层(铸造、烧结、轧制复合)组成,还可能包含覆层。 本文件适用于薄壁滑动轴承的材料选用。 注:本文件中的化学成分为未经加工的原材料的化学成分,在代表性样本上进行测试。 在轴承成品上取样进行化学成分测试

Plain bearings—Multilayer materials for thin-walled plain bearings

JB/T 7924-1995 滑动轴承薄壁轴承用金属多层材料

Metallic multilayer materials for plain bearings and thin-walled bearings

JB/T 6636-1993 机器人用薄壁密封轴承

本标准规定了机器人用薄壁密封四点接触球轴承与薄壁密封交叉圆柱滚子轴承的代号方法、外形尺寸、技术要求、测量方法、检验规则，标志、包装、运输及贮存。 本标准适用于机器人轴承的生产、检验及用户选型验收

Thin wall sealed bearings for robots

JB/T 6636-2007 滚动轴承.机器人用薄壁密封轴承

本标准规定了机器人用薄壁密封四点接触球轴承与薄壁密封交叉圆柱滚子轴承的代号方法、外形尺寸、技术要求、测量方法、检验规则、标志和包装。 本标准适用于机器人轴承的生产检验和用户验收

Rolling bearings.Thin section sealed bearings for robots

TB/T 2876-1998 滑动轴承 薄壁轴瓦和薄壁筒形轴承的壁厚测量

本标准规定了适用于成品状态的薄壁轴瓦和薄壁筒形轴承总壁厚侧t的检验方法和计量器具。 本标准不适用于热塑性塑料单层筒形轴承的壁厚测量。 注册码：本标淮中的所有尺寸以mm为单位

Wall thickness measurement of thin-walled plain bearings and thin-walled cylindrical bearings

DIN ISO 12306:1998 关节轴承.薄壁半轴承和薄壁轴承衬的壁厚度的测量

The document describes in accordance with ISO 12301 the checking methods and measuring equipment used for measuring the total wall thickness

Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes (ISO 12306:1994)

KS B ISO 12306:2002 普通轴承.薄壁半轴承和薄壁衬套壁厚测量

이 규격 KS B ISO 12301에 따르는 완성된 상태의 얇은 벽 두께의 분할 베어링

Plain bearings－Measurement of wall thickness ofthin－walled half－bearings and thin－walled bushes

GOST ISO 12306-1996 普通轴承.薄壁半轴承和薄壁衬套壁厚测量

Plain bearings. Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

GB/T 18330-2001 滑动轴承 薄壁轴瓦和薄壁轴套的壁厚测量

本标准规定了薄壁轴瓦和薄壁轴套壁厚的测量方法和测量设备。 本标准不适用于热塑轴套

Plain bearings--Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

BS 7772:1994 滑动轴承.薄壁半轴承和薄壁衬套的壁厚测量

This International Standard describes in accordance with ISO 12301 the checking methods and measuring equip-ment used for measuring the total wall

Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

SANS 12306:2005 滑动轴承.薄壁半轴承及薄壁衬套的壁厚测量

Describes in accordance with SANS 12301 the checking methods and measuring equipment used for measuring the total wall thickness of thin-walled

Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

KS B ISO 12306-2002(2012 滑动轴承薄壁半轴承和薄壁衬套壁厚的测量

Plain bearings－Measurement of wall thickness ofthin－walled half－bearings and thin－walled bushes

TB/T 3020-2001 滑动轴承 薄壁轴承用多层材料

本标准规定了用于制造薄壁轴承(轴瓦、衬套、止推垫圈)的多层材料的要求。多层材料由钢背、轴承衬层(铸造的、烧结的、轧制复合的)与可能有的表面镀层等组成

Plain bearings Multilayer materials for thin-walled bearings

ISO 12306:1994 滑动轴承 薄壁轴瓦和薄壁轴套的壁厚测量

Describes in accordance with ISO 12301 the checking methods (line measurement around the circumference, line measurement in the axial direction, point

Plain bearings; measurement of wall thickness of thin-walled half-bearings and thin-walled bushes

GB/T 34897-2017 滚动轴承 工业机器人RV减速器用精密轴承

Rolling bearings—Precision bearings for RV reducers of industrial robots

GB/T 18326-2022 滑动轴承 薄壁滑动轴承用多层材料

本文件规定了用于制造薄壁滑动轴承(轴瓦、轴套、止推垫圈)的多层材料的技术要求。多层材料由钢背、轴承材料层(铸造、烧结、轧制复合)组成,还可能包含覆层。 本文件适用于薄壁滑动轴承的材料选用。 注:本文件中的化学成分为未经加工的原材料的化学成分,在代表性样本上进行测试。 在轴承成品上取样进行化学成分测试

Plain bearings—Multilayer materials for thin-walled plain bearings

JB/T 7924-1995 滑动轴承薄壁轴承用金属多层材料

Metallic multilayer materials for plain bearings and thin-walled bearings