发布时间：2024-05-27 17:49:26 - 更新时间：2024年06月29日 15:22
点击量：0
有样品要送检？试试一键送检，5分钟极速响应
在线提交检测需求
对接客服咨询检测
Technical specification for heating pipe network transformation
为节约能源，保护环境，促进生产，改善人民生活，发展我国城镇集中供热事业，提高集中供热工程设计水平，做到技术先进、经济合理、安全适用，制定本规范。 本规范适用于供热热水介质设计压力小于或等于2.5MPa，设计温度小于或等于200℃；供热蒸汽介质设计压力小于或等于1.6MPa，设计温度小于或等于350
Design code for city heating network
Specifications for design of ubiquitous microgrid cooling and heating pipe network
Energy-saving monitoring of heating pipe network
Equivalent Outdoor Temperature for District Heating Systems
现批准《城镇供热管网设计标准》为行业标准，编号为CJJ/T34-2022，自2022年8月1日起实施。原《城镇供热管网设计规范》（CJJ34-2010）同时废止。 本标准在住房和城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房和城乡建设部标准定额研究所组织中国建筑
Design standard for urban heating pipe network
1.总则；2.术语；3.基本规定；4.设备与材料；5.工艺系统；6.供配电及照明；7.监测与控制；8.管网施工；9.压力试验、清洗和试运行；10.工程竣工验收；11.运行与调节
Technical standard for long-distance heating and hot water pipe network
This European Standard specifies requirements for joints made under field conditions between adjacent preinsulated pipes and/or fittings in district
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
本规程适用于城市供热管网和能力站的维护、检修及事故抢修。 本规程热管网的工作多数限定为： 1 工作压力P不大于1.6MPa（表压），介质温度t不大于350℃的蒸汽供热管网。 2 工作压力P不大于2.5MPa（表压），介质温度t不大于200℃的热水供热管网
Specification of maintain technique for city heating pipelines
本规范适用于城镇供热管网工程中下列结构的设计： 1 放坡开挖或护壁施工的明挖管沟及检查室； 2 独立式管道支架，包括固定支架、导向支架及活动支架
Code for structural design of heating pipelines in city and town
La présente Norme européenne spécifie les caractéristiques et les méthodes d'essai des robinets préisolés préfabriqués isolés thermiquement constitués
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
Preinsulated Bonded Pipe Systems for Underground Hot Water Networks - Steel Valve Assembly for Steel Service Pipes, Polyurethane Thermal Insulation and Outer Casing of Polyethylene
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.
Technical specification for heating pipe network transformation
为节约能源，保护环境，促进生产，改善人民生活，发展我国城镇集中供热事业，提高集中供热工程设计水平，做到技术先进、经济合理、安全适用，制定本规范。 本规范适用于供热热水介质设计压力小于或等于2.5MPa，设计温度小于或等于200℃；供热蒸汽介质设计压力小于或等于1.6MPa，设计温度小于或等于350
Design code for city heating network
Specifications for design of ubiquitous microgrid cooling and heating pipe network
Energy-saving monitoring of heating pipe network
Equivalent Outdoor Temperature for District Heating Systems
现批准《城镇供热管网设计标准》为行业标准，编号为CJJ/T34-2022，自2022年8月1日起实施。原《城镇供热管网设计规范》（CJJ34-2010）同时废止。 本标准在住房和城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房和城乡建设部标准定额研究所组织中国建筑
Design standard for urban heating pipe network
1.总则；2.术语；3.基本规定；4.设备与材料；5.工艺系统；6.供配电及照明；7.监测与控制；8.管网施工；9.压力试验、清洗和试运行；10.工程竣工验收；11.运行与调节
Technical standard for long-distance heating and hot water pipe network
This European Standard specifies requirements for joints made under field conditions between adjacent preinsulated pipes and/or fittings in district
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
本规程适用于城市供热管网和能力站的维护、检修及事故抢修。 本规程热管网的工作多数限定为： 1 工作压力P不大于1.6MPa（表压），介质温度t不大于350℃的蒸汽供热管网。 2 工作压力P不大于2.5MPa（表压），介质温度t不大于200℃的热水供热管网
Specification of maintain technique for city heating pipelines
本规范适用于城镇供热管网工程中下列结构的设计： 1 放坡开挖或护壁施工的明挖管沟及检查室； 2 独立式管道支架，包括固定支架、导向支架及活动支架
Code for structural design of heating pipelines in city and town
La présente Norme européenne spécifie les caractéristiques et les méthodes d'essai des robinets préisolés préfabriqués isolés thermiquement constitués
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
Preinsulated Bonded Pipe Systems for Underground Hot Water Networks - Steel Valve Assembly for Steel Service Pipes, Polyurethane Thermal Insulation and Outer Casing of Polyethylene
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.
首页
点击咨询
