GB/T 16957-2012 复合钢板 焊接接头力学性能试验方法
本标准规定了复合钢板焊接接头(以下简称焊接接头)的拉伸、弯曲、冲击和硬度试验方法、本标准适用于压力容器、核反应堆、储槽和舰船及其他用途的以钢材为基材,以不锈钢或有色金属为覆材,总厚度不小于8 mm的轧制、爆炸、堆焊、铸造、爆炸轧制、堆焊轧制及铸造轧制的单面和双面复合钢板焊接接头力学和工艺性能试验
Clad teel plates.Mechanical technical tests on welded joints
GB/T 16957-1997 复合钢板焊接接头力学性能试验方法
本标准规定了复合钢板焊接接头的拉伸、弯曲、冲击和硬度试验方法。 本标准适用于压力容器、核反应堆、储槽和舰船及其他用途的以钢材为基材，以不锈钢或有色金属为覆材，总厚度大于等于8mm的轧制、爆炸、堆焊、铸造、爆炸轧制、堆焊轧制及铸造轧制的单面和双面复合钢板焊接接头（以下简称焊接接头
Mechanical tests on welded joints in clad plates
STAS 11253-1985 焊接接头．钢板喷射焊接的喷头．形状和尺寸
Prezentul standard stabile?te formele ?i dimensiunile de baz? ale bosajelor executate ?n table de o?el carbon nealiat cu max. 0,25% C, neprotejate
Welded joints PROJECTIONS FOR PROJECTION WELDING OF STEEL SHEETS Shapes and dimensions
IS 1182-1983 钢板熔焊对接接头射线照相检验的推荐规程
1.1 This standard prescribes recommendations for the radiographic examination of fusion welded butt joints in steel plates. 1.2 This standard
DB44/T 1852-2016 奥氏体不锈钢薄板对接焊接接头超声检测
厚度（t）为 3 mm≤t＜10 mm的奥氏体不锈钢薄板对接焊接接头的手工超声检测
Ultrasonic testing of butt welded joints of austenitic stainless steel sheets
ISO 2405:1972 50至200mm厚钢板熔焊对接接头的射线照相检验推荐规程
Recommended practice for radiographic inspection of fusion welded butt joints for steel plates 50 to 200 mm thick
QJ 1175A-1996 钢薄板熔焊对接接头X射线照相检验方法
X-ray photographic inspection method of fusion-welded butt joints of steel sheets
ISO 1106-1:1984 熔焊接头射线检验推荐工艺 第1部分:50mm以下钢板的熔焊对接接头
Recommended practice for radiographic examination of fusion welded joints; Part 1 : Fusion welded butt joints in steel plates up to 50 mm thick
ISO/R 1106:1969 厚度小于等于50 mm（2 in.）的钢板熔焊对接接头的射线照相检验推荐规程
Recommended practice for radiographic inspection of fusion welded butt joints for steel plates up to 50 mm (2 in) thick
ISO 1106-2:1985 熔焊接头射线检验推荐工艺 第2部分:厚度50mm～200mm(包括200mm)钢板的熔焊对接接头
Recommended practice for radiographic examination of fusion welded joints; Part 2 : Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
KS B ISO 1106-2:2007 熔焊接头射线检验推荐工艺.第2部分:厚度50mm~200mm(包括200mm)钢板的熔焊对接接头
이 규격은 만족할 만한 결과를 얻을 수 있는 용접부 방사선 투과 검사의 일반적인 기법에 대
Recommended practice for radiographic examination of fusion welded joints-Part 2:Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
KS B ISO 1106-2:2013 熔焊接头射线检验推荐工艺 第2部分：厚度50mm~200mm（包括200mm）钢板的熔焊对接接头
Recommended practice for radiographic examination of fusion welded joints－Part 2：Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
KS B ISO 1106-2-2007(2012 熔焊接头射线照相检验推荐规程第2部分:厚度大于50mm小于等于200mm钢板的熔焊对接接头
Recommended practice for radiographic examination of fusion welded joints－Part 2：Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
EN 1737:1998 高压多孔混凝土或开放结构轻集料混凝土预制件用钢筋板或框架焊接接头剪切强度的测定
The document specifies a method of determiningThe shear strength of welded joints in reinforcements intended for use in prefabricated components made
Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
SAE J1453-3-2009 形环面密封连接器规范：第3部分的要求 尺寸 和测试钢接头 隔板 旋转接头 铜焊套管 连接器 帽 和带有 SAE J1926-2 英寸螺柱端的连接器
"Purpose The three parts of SAE J1453 cover material@ dimensional@ and performance requirements of steel O-ring face seal (ORFS) connectors for tubing
Specification for O-Ring Face Seal Connectors: Part 3—Requirements@ Dimensions@ and Tests for Steel Unions@ Bulkheads@ Swivels@ Braze Sleeves@ Connectors@ Caps@ and Connectors with SAE J1926-2 Inch Stud Ends
GB/T 16957-2012 复合钢板 焊接接头力学性能试验方法
本标准规定了复合钢板焊接接头(以下简称焊接接头)的拉伸、弯曲、冲击和硬度试验方法、本标准适用于压力容器、核反应堆、储槽和舰船及其他用途的以钢材为基材,以不锈钢或有色金属为覆材,总厚度不小于8 mm的轧制、爆炸、堆焊、铸造、爆炸轧制、堆焊轧制及铸造轧制的单面和双面复合钢板焊接接头力学和工艺性能试验
Clad teel plates.Mechanical technical tests on welded joints
GB/T 16957-1997 复合钢板焊接接头力学性能试验方法
本标准规定了复合钢板焊接接头的拉伸、弯曲、冲击和硬度试验方法。 本标准适用于压力容器、核反应堆、储槽和舰船及其他用途的以钢材为基材，以不锈钢或有色金属为覆材，总厚度大于等于8mm的轧制、爆炸、堆焊、铸造、爆炸轧制、堆焊轧制及铸造轧制的单面和双面复合钢板焊接接头（以下简称焊接接头
Mechanical tests on welded joints in clad plates
STAS 11253-1985 焊接接头．钢板喷射焊接的喷头．形状和尺寸
Prezentul standard stabile?te formele ?i dimensiunile de baz? ale bosajelor executate ?n table de o?el carbon nealiat cu max. 0,25% C, neprotejate
Welded joints PROJECTIONS FOR PROJECTION WELDING OF STEEL SHEETS Shapes and dimensions
IS 1182-1983 钢板熔焊对接接头射线照相检验的推荐规程
1.1 This standard prescribes recommendations for the radiographic examination of fusion welded butt joints in steel plates. 1.2 This standard
DB44/T 1852-2016 奥氏体不锈钢薄板对接焊接接头超声检测
厚度（t）为 3 mm≤t＜10 mm的奥氏体不锈钢薄板对接焊接接头的手工超声检测
Ultrasonic testing of butt welded joints of austenitic stainless steel sheets
ISO 2405:1972 50至200mm厚钢板熔焊对接接头的射线照相检验推荐规程
Recommended practice for radiographic inspection of fusion welded butt joints for steel plates 50 to 200 mm thick
QJ 1175A-1996 钢薄板熔焊对接接头X射线照相检验方法
X-ray photographic inspection method of fusion-welded butt joints of steel sheets
ISO 1106-1:1984 熔焊接头射线检验推荐工艺 第1部分:50mm以下钢板的熔焊对接接头
Recommended practice for radiographic examination of fusion welded joints; Part 1 : Fusion welded butt joints in steel plates up to 50 mm thick
ISO/R 1106:1969 厚度小于等于50 mm（2 in.）的钢板熔焊对接接头的射线照相检验推荐规程
Recommended practice for radiographic inspection of fusion welded butt joints for steel plates up to 50 mm (2 in) thick
ISO 1106-2:1985 熔焊接头射线检验推荐工艺 第2部分:厚度50mm～200mm(包括200mm)钢板的熔焊对接接头
Recommended practice for radiographic examination of fusion welded joints; Part 2 : Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
KS B ISO 1106-2:2007 熔焊接头射线检验推荐工艺.第2部分:厚度50mm~200mm(包括200mm)钢板的熔焊对接接头
이 규격은 만족할 만한 결과를 얻을 수 있는 용접부 방사선 투과 검사의 일반적인 기법에 대
Recommended practice for radiographic examination of fusion welded joints-Part 2:Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
KS B ISO 1106-2:2013 熔焊接头射线检验推荐工艺 第2部分：厚度50mm~200mm（包括200mm）钢板的熔焊对接接头
Recommended practice for radiographic examination of fusion welded joints－Part 2：Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
KS B ISO 1106-2-2007(2012 熔焊接头射线照相检验推荐规程第2部分:厚度大于50mm小于等于200mm钢板的熔焊对接接头
Recommended practice for radiographic examination of fusion welded joints－Part 2：Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness
EN 1737:1998 高压多孔混凝土或开放结构轻集料混凝土预制件用钢筋板或框架焊接接头剪切强度的测定
The document specifies a method of determiningThe shear strength of welded joints in reinforcements intended for use in prefabricated components made
Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
SAE J1453-3-2009 形环面密封连接器规范：第3部分的要求 尺寸 和测试钢接头 隔板 旋转接头 铜焊套管 连接器 帽 和带有 SAE J1926-2 英寸螺柱端的连接器
"Purpose The three parts of SAE J1453 cover material@ dimensional@ and performance requirements of steel O-ring face seal (ORFS) connectors for tubing
Specification for O-Ring Face Seal Connectors: Part 3—Requirements@ Dimensions@ and Tests for Steel Unions@ Bulkheads@ Swivels@ Braze Sleeves@ Connectors@ Caps@ and Connectors with SAE J1926-2 Inch Stud Ends
编辑：北检院编辑部
