服务热线:400-635-0567

装备、电工电子产品及通信设备检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

MSZ 9200/36.lap-1968 号.交

GB 50467-2008 微程施验收规范

为规范微电子生产设备安装工程施工,确保微电子生产设备安装质量和可靠运行,促进微电子生产设备安装技术的发展,制定本规范。 本规范适用于集成电路、半导体分立器件生产设备安装工程的施工及验收。本规范不包括集成电路及半导体分立器件生产设备联动调试及试生产。 微电子生产设备安装工程施工中采用的工程技术文件

Code for construction and acceptance of micro-electronics manufacturing equipment installation engineering

GB/T 30085-2013 业系统、置和 缆和线的标记

本标准规定了用于工业装置、设备及产品用电缆、绝缘线芯/导体的标记规则和方法,标记是为了给出技术文件和实际设备之间的明确对应关系及其他目的。规定并描述了以下方法:a) 带颜色的电缆及带标志的绝缘线芯的使用;b) 附加标识标记;c) 附加连接标记;d) 附加信号标记。本标准适用于工业装置、设备及产品用电

Industrial systems, installations and equipment and industrial products.Labelling of cables and cores

GOST 24686-1981 技术.一般技术要求

Equipment for manufacture of electronic and electrical products. General technical requirements. Marking, packing, transportation and preservation

YDJ 31-1983 程施验收技术规范

Technical specifications for Installation engineering construction and acceptance of communication power supply equipment

GB/T 5170.2-2008 环境试验检验方法.温度试验

GB/T 5170的本部分规定了温度(含低温、高温和温度变化)试验设备的检验项目、检验用主要仪器及要求、检验负载、检验条件、检验方法、数据处理结果与检验结果、检验周期等内容。 本部分适用于对GB/T 2423.1《电工电子产品环境试验 第2部分:试验方法 试验A:低温》、GB/T 2423.2

Inspection methods for environmental testing equipments for electric and electronic products.Temperature testing equipments

GB/T 5170.8-2008 环境试验检验方法.盐雾试验

GB/T 5170的本部分规定了盐雾试验设备的检验项目、检验用主要仪器及要求、检验负载、检验条件、检验方法、数据处理结果与检验结果、检验周期等内容。 本部分适用于对GB/T 2423.17《电工电子产品环境试验 第2部分:试验方法 试验Ka:盐雾试验方法》、GB/T 2423.18《电工

Inspection methods for environmental testing equipments for electric and electronic products.Salt mist testing equipments

GB/T 5170.5-2008 环境试验检验方法.湿热试验

GB/T 5170的本部分规定了湿热试验设备的检验项目、检验用主要仪器及要求、检验负载、检验条件、检验方法、数据处理结果与检验结果、检验周期等内容。 本部分适用于对GB/T 2423.3《电工电子产品环境试验 第2部分:试验方法 试验Cab:恒定湿热试验》、GB/T 2423.4《电工电子产品

Inspection methods for environmental testing equipments for electric and electronic products.Damp heat testing equipments

BS EN 62491:2008 业系统、置和.缆和线的标签

This standard provides rules and guidelines for the labelling of cables and cores/conductors used in industrial installations, equipment and products

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

IEC 62491:2008 业系统、置和.缆和线的标签

This standard provides rules and guidelines for the labelling of cables and cores/conductors used in industrial installations, equipment and products

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

DIN EN 62491:2009 业系统、置和 缆和线的标签

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores (IEC 62491:2008); German version EN 62491:2008

YD/T 5040-2005 计规范

本规范适用于新建通信电源设备安装工程。扩建和改建工程可参照执行

Design Specifications of Engineering for Telecommunication Power Supply Equipment Installation

NF C04-002*NF EN 62491:2008 业系统、置和 缆和缆芯的标注

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

GJB 5394-2005 对抗用要求

本规范规定了LBA-303键合剂的要求、质量保证规定、交货准备及说明事项等。 本规范适用于以烷醇胺化合物、三氟化硼等为主要原料制得的LBA-303键合剂

Specification for LBA-303 bonding agent

GJB 5394A-2018 对抗用要求

General requirements for electronic countermeasures equipment power supply equipment

MSZ 9200/36.lap-1968 号.交

GB 50467-2008 微程施验收规范

为规范微电子生产设备安装工程施工,确保微电子生产设备安装质量和可靠运行,促进微电子生产设备安装技术的发展,制定本规范。 本规范适用于集成电路、半导体分立器件生产设备安装工程的施工及验收。本规范不包括集成电路及半导体分立器件生产设备联动调试及试生产。 微电子生产设备安装工程施工中采用的工程技术文件

Code for construction and acceptance of micro-electronics manufacturing equipment installation engineering

GB/T 30085-2013 业系统、置和 缆和线的标记

本标准规定了用于工业装置、设备及产品用电缆、绝缘线芯/导体的标记规则和方法,标记是为了给出技术文件和实际设备之间的明确对应关系及其他目的。规定并描述了以下方法:a) 带颜色的电缆及带标志的绝缘线芯的使用;b) 附加标识标记;c) 附加连接标记;d) 附加信号标记。本标准适用于工业装置、设备及产品用电

Industrial systems, installations and equipment and industrial products.Labelling of cables and cores

GOST 24686-1981 技术.一般技术要求

Equipment for manufacture of electronic and electrical products. General technical requirements. Marking, packing, transportation and preservation

YDJ 31-1983 程施验收技术规范

Technical specifications for Installation engineering construction and acceptance of communication power supply equipment

GB/T 5170.2-2008 环境试验检验方法.温度试验

GB/T 5170的本部分规定了温度(含低温、高温和温度变化)试验设备的检验项目、检验用主要仪器及要求、检验负载、检验条件、检验方法、数据处理结果与检验结果、检验周期等内容。 本部分适用于对GB/T 2423.1《电工电子产品环境试验 第2部分:试验方法 试验A:低温》、GB/T 2423.2

Inspection methods for environmental testing equipments for electric and electronic products.Temperature testing equipments

GB/T 5170.8-2008 环境试验检验方法.盐雾试验

GB/T 5170的本部分规定了盐雾试验设备的检验项目、检验用主要仪器及要求、检验负载、检验条件、检验方法、数据处理结果与检验结果、检验周期等内容。 本部分适用于对GB/T 2423.17《电工电子产品环境试验 第2部分:试验方法 试验Ka:盐雾试验方法》、GB/T 2423.18《电工

Inspection methods for environmental testing equipments for electric and electronic products.Salt mist testing equipments

GB/T 5170.5-2008 环境试验检验方法.湿热试验

GB/T 5170的本部分规定了湿热试验设备的检验项目、检验用主要仪器及要求、检验负载、检验条件、检验方法、数据处理结果与检验结果、检验周期等内容。 本部分适用于对GB/T 2423.3《电工电子产品环境试验 第2部分:试验方法 试验Cab:恒定湿热试验》、GB/T 2423.4《电工电子产品

Inspection methods for environmental testing equipments for electric and electronic products.Damp heat testing equipments

BS EN 62491:2008 业系统、置和.缆和线的标签

This standard provides rules and guidelines for the labelling of cables and cores/conductors used in industrial installations, equipment and products

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

IEC 62491:2008 业系统、置和.缆和线的标签

This standard provides rules and guidelines for the labelling of cables and cores/conductors used in industrial installations, equipment and products

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

DIN EN 62491:2009 业系统、置和 缆和线的标签

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores (IEC 62491:2008); German version EN 62491:2008

YD/T 5040-2005 计规范

本规范适用于新建通信电源设备安装工程。扩建和改建工程可参照执行

Design Specifications of Engineering for Telecommunication Power Supply Equipment Installation

NF C04-002*NF EN 62491:2008 业系统、置和 缆和缆芯的标注

Industrial systems, installations and equipment and industrial products - Labelling of cables and cores

GJB 5394-2005 对抗用要求

本规范规定了LBA-303键合剂的要求、质量保证规定、交货准备及说明事项等。 本规范适用于以烷醇胺化合物、三氟化硼等为主要原料制得的LBA-303键合剂

Specification for LBA-303 bonding agent

GJB 5394A-2018 对抗用要求

General requirements for electronic countermeasures equipment power supply equipment

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询