服务热线:400-635-0567

色漆、漆膜检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

GB/T 9754-2007 和清 不含金属颜料的的20°、60°和85°镜面光泽的测定

1.1本标准是有关色漆、清漆及相关产品的取样和试验的系列标准之一。 本标准规定了用反射计以 20°、60°或85°几何条件测定色漆漆膜的镜面光泽的试验方法。本方法不适用于含金属颜料色漆漆膜的光泽测量。 a) 60°几何条件适用于所有的漆膜,但是对于很高光泽和接近光的漆膜,20

Paints and varnishes.Determination of specular gloss of non-metallic paint films at 20°,60°and 85°

GB/T 9754-1988 和清 不含金属颜料的 之20°、60°和85°镜面光泽的测定

本标准规定了以20’、60’、85°的几何角度测定漆膜镜面光泽的方法。60’法适用于所有色漆漆膜,但对于光泽很高的色漆或接近光泽的色漆,20’或85’法则更为适宜。 20’法对高光泽色漆可提高鉴别能力,适用于60’光泽高于70单位的色漆。 85’法对低光泽色漆可提高鉴别能力

Paints and varnishes--Measurement of specular gloss of non-metallic paint films at 20°,60°and 85°

ISO 2813:1994 和清 不含金属颜料的的20°、60°和85°镜面光泽的测定

本标准是有关色漆、清漆及相关产品的取样和试验的系列标准之一。 本标准规定了用反射计以20°、60°或85°几何条件测定色漆漆膜的镜面光泽的试验方法。本方法不 适用于含金属颜料色漆漆膜的光泽测量。 a) 60°几何条件适用于所有的漆膜,但是对于很高光泽和接近光的漆膜,20°或

Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° und 85°

DIN EN ISO 2808:2019 和清 厚的测定(ISO 2808:2019)

Paints and varnishes - Determination of film thickness (ISO 2808:2019)

GB/T 9286-1998 和清 的划格试验

本标准规定了在以直角网格图形切割涂层穿透至底材时来评定涂层从底材上脱离的抗性的一种试验方法。用这种经验性的试验程序测得的性能,除了取决于该涂料对上道涂层或底材的附着力外,还取决于其他各种因素。所以不能将这个试验程序看作是测定附着力的一种方法。 注1:虽然本试验主要规定用于实验室,但也

Paints and varnishes--Cross cut test for films

GB/T 13452.2-1992 和清 厚度的测定

本标准规定了色漆和有关材料漆膜厚度的测量方法。 它不包括所有的通用方法,而仅规定在一定条件下测定漆膜厚度的方法

Paints and varnishes--Determination of film thickness

GB/T 13452.2-2008 和清.厚度的测定

本部分规定了一系列用于测量涂敷至底材上的涂层的厚度的方法,包括测量湿膜厚度、干膜厚度、未固化粉末涂层厚度及粗糙表面上漆膜厚度的方法。在有单个测试方法标准存在时,本部分直接引用这些标准,否则就把这些测试方法详细描述出来。 附录A给出了测试方法概述,对每个测试方法规定了适用范围、现有标准和精密度

Paints and varnishes.Determination of film thickness

SANS 5142:2005 和清.涂的打磨性

Specifies a method for the determination of the sanding properties of paint and related coating films

Paints and varnishes - Sanding properties of paint films

0 和清 厚度的测定

This International Standard reviews and specifies a number of methods that are applicable to the measurement of the thickness of organic coatings

ISO 2808:1974 和清.厚度的测定

Paints and varnishes; Determination of film thickness

SANS 2808:1997 和清厚度的测定

This International Standard reviews and specifies a number of methods that are applicable to the measurement of the thickness of organic coatings

Paints and varnishes - Determination of film thickness

DS/EN ISO 2808:2007 和清 厚度的测定

This International Standard describes a number of methods that are applicable to the measurement of the thickness of coatings applied to a substrate

Paints and varnishes - Determination of film thickness

NF T30-120*NF EN ISO 2808:2019 和清 厚度的测定

Paints and varnishes - Determination of film thickness

KS M ISO 2808:2022 和清.厚度的测定

Paints and varnishes — Determination of film thickness

KS M ISO 2808-2017 和清厚度的测定

Paints and varnishes-Determination of film thickness

GB/T 9754-2007 和清 不含金属颜料的的20°、60°和85°镜面光泽的测定

1.1本标准是有关色漆、清漆及相关产品的取样和试验的系列标准之一。 本标准规定了用反射计以 20°、60°或85°几何条件测定色漆漆膜的镜面光泽的试验方法。本方法不适用于含金属颜料色漆漆膜的光泽测量。 a) 60°几何条件适用于所有的漆膜,但是对于很高光泽和接近光的漆膜,20

Paints and varnishes.Determination of specular gloss of non-metallic paint films at 20°,60°and 85°

GB/T 9754-1988 和清 不含金属颜料的 之20°、60°和85°镜面光泽的测定

本标准规定了以20’、60’、85°的几何角度测定漆膜镜面光泽的方法。60’法适用于所有色漆漆膜,但对于光泽很高的色漆或接近光泽的色漆,20’或85’法则更为适宜。 20’法对高光泽色漆可提高鉴别能力,适用于60’光泽高于70单位的色漆。 85’法对低光泽色漆可提高鉴别能力

Paints and varnishes--Measurement of specular gloss of non-metallic paint films at 20°,60°and 85°

ISO 2813:1994 和清 不含金属颜料的的20°、60°和85°镜面光泽的测定

本标准是有关色漆、清漆及相关产品的取样和试验的系列标准之一。 本标准规定了用反射计以20°、60°或85°几何条件测定色漆漆膜的镜面光泽的试验方法。本方法不 适用于含金属颜料色漆漆膜的光泽测量。 a) 60°几何条件适用于所有的漆膜,但是对于很高光泽和接近光的漆膜,20°或

Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° und 85°

DIN EN ISO 2808:2019 和清 厚的测定(ISO 2808:2019)

Paints and varnishes - Determination of film thickness (ISO 2808:2019)

GB/T 9286-1998 和清 的划格试验

本标准规定了在以直角网格图形切割涂层穿透至底材时来评定涂层从底材上脱离的抗性的一种试验方法。用这种经验性的试验程序测得的性能,除了取决于该涂料对上道涂层或底材的附着力外,还取决于其他各种因素。所以不能将这个试验程序看作是测定附着力的一种方法。 注1:虽然本试验主要规定用于实验室,但也

Paints and varnishes--Cross cut test for films

GB/T 13452.2-1992 和清 厚度的测定

本标准规定了色漆和有关材料漆膜厚度的测量方法。 它不包括所有的通用方法,而仅规定在一定条件下测定漆膜厚度的方法

Paints and varnishes--Determination of film thickness

GB/T 13452.2-2008 和清.厚度的测定

本部分规定了一系列用于测量涂敷至底材上的涂层的厚度的方法,包括测量湿膜厚度、干膜厚度、未固化粉末涂层厚度及粗糙表面上漆膜厚度的方法。在有单个测试方法标准存在时,本部分直接引用这些标准,否则就把这些测试方法详细描述出来。 附录A给出了测试方法概述,对每个测试方法规定了适用范围、现有标准和精密度

Paints and varnishes.Determination of film thickness

SANS 5142:2005 和清.涂的打磨性

Specifies a method for the determination of the sanding properties of paint and related coating films

Paints and varnishes - Sanding properties of paint films

0 和清 厚度的测定

This International Standard reviews and specifies a number of methods that are applicable to the measurement of the thickness of organic coatings

ISO 2808:1974 和清.厚度的测定

Paints and varnishes; Determination of film thickness

SANS 2808:1997 和清厚度的测定

This International Standard reviews and specifies a number of methods that are applicable to the measurement of the thickness of organic coatings

Paints and varnishes - Determination of film thickness

DS/EN ISO 2808:2007 和清 厚度的测定

This International Standard describes a number of methods that are applicable to the measurement of the thickness of coatings applied to a substrate

Paints and varnishes - Determination of film thickness

NF T30-120*NF EN ISO 2808:2019 和清 厚度的测定

Paints and varnishes - Determination of film thickness

KS M ISO 2808:2022 和清.厚度的测定

Paints and varnishes — Determination of film thickness

KS M ISO 2808-2017 和清厚度的测定

Paints and varnishes-Determination of film thickness

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询