DL/T 760.3-2012 均压环、屏蔽环和均压屏蔽环
本标准规定了均压环、屏蔽环和均压屏蔽环的结构型式及分类、技术要求、试验方法和验收规则等内容。本标准适用于330kV及以上电压等级的架空电力线路及变电站悬垂绝缘子串使用的均压环、屏蔽环和均压屏蔽环
Grading ring, shielding ring, grading and shielding ring
DL/T 760.3-2001 均压环、屏蔽环和均压屏蔽环
Grading ring,shielding ring, grading and shielding ring
NAVY MIL-HDBK-2164 A-1996 电子设备环境压力屏蔽过程
This handbook provides guidelines for Environmental Stress Screening (ESS) of electronic equipment, including environmental screening conditions
ENVIRONMENTAL STRESS SCREENING PROCESS FOR ELECTRONIC EQUIPMENT
T/ZZB 018-2015 智能热水循环屏蔽泵
本标准规定了智能热水循环屏蔽泵的术语和定义、型式、型号与基本参数、功能、技术要求、试验方法、检验规则、标志、包装、运输与贮存、质量承诺等。 本标准适用于输送清水或其物理化学性质类似清水液体的智能热水循环屏蔽泵（以下简称循环泵）,输入功率≤50W， 其输送液体的温度2℃～110℃。 本
Intelligent hot water circulating canned pump
JB/T 13705-2019 智能热水循环屏蔽电泵
Intelligent hot water circulation shielded electric pump
T/CECS 10003-2017 供暖器具用屏蔽式循环泵
本标准规定了燃气采暖热水炉、热泵、太阳能光热系统、电锅炉等供暖器具用屏蔽式循环泵(以下简称循环泵)的分类，技术要求，试验方法，检验规则，标志和使用说明书，包装、运输和贮存。 本标准适用于电源频率为50 Hz，额定电压单相220 V、三相380 V，连续工作制(S1)的电机输送温度为5 ℃~110
Canned circulating pump for heating appliance
NAVY QPL-AS83519-2-2006 耐环境热缩性焊接式屏蔽终端
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject non-Government standard
SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR
SAE J2840-2014 高压屏蔽和护套电缆
This SAE Standard covers cable, shielded and jacketed, intended for use at a nominal system voltage up to 1000 V (AC rms or DC). It is intended
High Voltage Shielded and Jacketed Cable
SAE J2840-2017 高压屏蔽和护套电缆
This SAE Standard covers cable, shielded and jacketed, intended for use at a nominal system voltage up to 1000 V (AC rms or DC). It is intended
High Voltage Shielded and Jacketed Cable
SAE J2840-2021 高压屏蔽和护套电缆
This SAE Standard covers cable@ shielded and jacketed@ intended for use at a nominal system voltage up to 1000 V (AC rms or DC). It is intended
High Voltage Shielded and Jacketed Cable
IEEE 1143-1994 低压电缆屏蔽指南
Informs and familiarizes the reader with shielding practice. An overview of shielding practice, systems and test methods is provided
Guide on Shielding Practice for Low Voltage Cables
SAE AS83519/1B-2023 屏蔽端接，焊接式，绝缘，热缩，耐环境，用于镀锡或镀银屏蔽的电缆（I类）
SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT FOR CABLES HAVING TIN OR SILVER PLATED SHIELDS (CLASS I)
SAE ARP7503-2020 屏蔽电缆上两件式压接式套圈的屏蔽端接方法
Methods of Shield Termination for Two-Piece, Crimp-Style Ferrule on Shielded Cables
SAE J1654-2012 屏蔽的高压主电缆
This SAE Standard covers unshielded cable intended for use at a nominal system voltage up to 600 V or 1000 V (AC rms or DC).. It is intended for use
Unshielded High Voltage Primary Cable
SAE AS21608A-2012 套圈，屏蔽端接，压接式
This specification covers crimp style@ insulated and uninsulated@ shield terminating ferrules for RF cable and shielded cable
Ferrule@ Shield Terminating@ Crimp Style
DL/T 760.3-2012 均压环、屏蔽环和均压屏蔽环
本标准规定了均压环、屏蔽环和均压屏蔽环的结构型式及分类、技术要求、试验方法和验收规则等内容。本标准适用于330kV及以上电压等级的架空电力线路及变电站悬垂绝缘子串使用的均压环、屏蔽环和均压屏蔽环
Grading ring, shielding ring, grading and shielding ring
DL/T 760.3-2001 均压环、屏蔽环和均压屏蔽环
Grading ring,shielding ring, grading and shielding ring
NAVY MIL-HDBK-2164 A-1996 电子设备环境压力屏蔽过程
This handbook provides guidelines for Environmental Stress Screening (ESS) of electronic equipment, including environmental screening conditions
ENVIRONMENTAL STRESS SCREENING PROCESS FOR ELECTRONIC EQUIPMENT
T/ZZB 018-2015 智能热水循环屏蔽泵
本标准规定了智能热水循环屏蔽泵的术语和定义、型式、型号与基本参数、功能、技术要求、试验方法、检验规则、标志、包装、运输与贮存、质量承诺等。 本标准适用于输送清水或其物理化学性质类似清水液体的智能热水循环屏蔽泵（以下简称循环泵）,输入功率≤50W， 其输送液体的温度2℃～110℃。 本
Intelligent hot water circulating canned pump
JB/T 13705-2019 智能热水循环屏蔽电泵
Intelligent hot water circulation shielded electric pump
T/CECS 10003-2017 供暖器具用屏蔽式循环泵
本标准规定了燃气采暖热水炉、热泵、太阳能光热系统、电锅炉等供暖器具用屏蔽式循环泵(以下简称循环泵)的分类，技术要求，试验方法，检验规则，标志和使用说明书，包装、运输和贮存。 本标准适用于电源频率为50 Hz，额定电压单相220 V、三相380 V，连续工作制(S1)的电机输送温度为5 ℃~110
Canned circulating pump for heating appliance
NAVY QPL-AS83519-2-2006 耐环境热缩性焊接式屏蔽终端
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject non-Government standard
SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR
SAE J2840-2014 高压屏蔽和护套电缆
This SAE Standard covers cable, shielded and jacketed, intended for use at a nominal system voltage up to 1000 V (AC rms or DC). It is intended
High Voltage Shielded and Jacketed Cable
SAE J2840-2017 高压屏蔽和护套电缆
This SAE Standard covers cable, shielded and jacketed, intended for use at a nominal system voltage up to 1000 V (AC rms or DC). It is intended
High Voltage Shielded and Jacketed Cable
SAE J2840-2021 高压屏蔽和护套电缆
This SAE Standard covers cable@ shielded and jacketed@ intended for use at a nominal system voltage up to 1000 V (AC rms or DC). It is intended
High Voltage Shielded and Jacketed Cable
IEEE 1143-1994 低压电缆屏蔽指南
Informs and familiarizes the reader with shielding practice. An overview of shielding practice, systems and test methods is provided
Guide on Shielding Practice for Low Voltage Cables
SAE AS83519/1B-2023 屏蔽端接，焊接式，绝缘，热缩，耐环境，用于镀锡或镀银屏蔽的电缆（I类）
SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT FOR CABLES HAVING TIN OR SILVER PLATED SHIELDS (CLASS I)
SAE ARP7503-2020 屏蔽电缆上两件式压接式套圈的屏蔽端接方法
Methods of Shield Termination for Two-Piece, Crimp-Style Ferrule on Shielded Cables
SAE J1654-2012 屏蔽的高压主电缆
This SAE Standard covers unshielded cable intended for use at a nominal system voltage up to 600 V or 1000 V (AC rms or DC).. It is intended for use
Unshielded High Voltage Primary Cable
SAE AS21608A-2012 套圈，屏蔽端接，压接式
This specification covers crimp style@ insulated and uninsulated@ shield terminating ferrules for RF cable and shielded cable
Ferrule@ Shield Terminating@ Crimp Style
编辑：北检院编辑部
