GB/T 20201-2006 灌溉用聚乙烯(PE)压力管机械连接管件
本标准规定了灌溉用聚乙烯(PE)压力管机械连接管件(以下简称“管件”)的产品分类、材料、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于公称外径小于110mm、使用压力不大于0.6MPa、水温不超过45℃的灌溉用聚乙烯压力管的机械连接管件。 本标准不适用于
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
AS 1460.1:1989 聚乙烯管件使用.第1部分:机械连接管件
This Standard specifies requirements for mechanical jointing fittings suitable for use with polyethylene pipes manufactured in accordance with AS 1159
Fittings for use with polyethylene pipes Part 1: Mechanical jointing fittings
ASTM F1387-19 管道和管道机械连接管件的性能标准规范
1.1 This specification establishes the performance characteristics required for mechanically attached fittings (MAFs) for use in piping and tubing
Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM F138-00 管道系统和配管的机械连接管件性能的标准规范
1.1 This specification covers the requirements for wrought 18 chromium-14 nickel-2.5 molybdenum stainless steel bar and wire used
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
ASTM F1387-99(2012 管道系统和配管的机械连接管件性能的标准规范
1.1 This specification establishes the performance characteristics required for mechanically attached fittings (MAFs) for use in piping
Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
AS 2537/AMD 1:2002 冷热水设备用交联耦合聚乙烯管(PE-X)的机械连接管件
The 1994 edition of AS 2537 is amended as follows; the amendments should be inserted in the appropriate places
Mechanical jointing fittings for use with cross-linked polyethylene pipe (PE-X) for hot and cold water applications; Amendment No.1
ISO 9625:1993 灌溉用聚乙烯压力管的机械式连接管件
Specifies the requirements and test methods (classification, materials, workmanship and appearance, design, mechanical and hydraulic characteristics
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
ISO 14531-3:2010 塑料管和管件.气体燃料输送用交联聚乙烯(PE-X)管系.公制系列.规格第3部分:机械连接管件(包括PE-X金属接管)
This part of ISO 14531 specifies the physical properties and mechanical-performance requirements for full-end-load-resistant mechanical fittings
Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
T/CISA 007-2019 内衬不锈钢机械连接复合管件
本标准规定了内衬不锈钢机械连接复合管件的分类、代号及标记、订货内容、要求、试验方法、检验规则、标志、包装、运输和贮存
Mechanical connection composite fittings stainless steel lined
NF T54-051:1979 聚乙烯管件.机械管件连接系统的压降.试验方法和要求
Polyethylene pipes. Pressure drop in mechanical pipe-jointing systems. Method of test and requirements.
ASTM F1387-23 管道和卡套管机械连接配件性能标准规范
Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ANSI/ASTM F2176:2002 聚乙烯管道及内管道用机械连接件规范
This specification establishes requirements for material, performance, workmanship and test methods for the qualification of 2 in. and smaller
Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
ASTM F2176-02(2009 聚乙烯管道及内管道用机械连接件规范
1.1 This specification establishes requirements for material, performance, workmanship and test methods for the qualification of 2 in.
Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
SFS 3467-1988 塑料管．PEM煤气管和PEH煤气管以及相应的管部件．机械连接
T?ss? standardissa esitet??n yleiset vaatimukset ja testausmenetelm?t PEM- ja PEH-kaasuputkien mekaanisille liitoksille, kun PEM- ja PEH-kaasuputkia
ASTM F2176-02 机械连接件用聚乙烯导管,排泄管和内部管道的标准规范
1.1 This specification establishes requirements for material, performance, workmanship and test methods for the qualification of 2 in. and smaller
Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
GB/T 20201-2006 灌溉用聚乙烯(PE)压力管机械连接管件
本标准规定了灌溉用聚乙烯(PE)压力管机械连接管件(以下简称“管件”)的产品分类、材料、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于公称外径小于110mm、使用压力不大于0.6MPa、水温不超过45℃的灌溉用聚乙烯压力管的机械连接管件。 本标准不适用于
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
AS 1460.1:1989 聚乙烯管件使用.第1部分:机械连接管件
This Standard specifies requirements for mechanical jointing fittings suitable for use with polyethylene pipes manufactured in accordance with AS 1159
Fittings for use with polyethylene pipes Part 1: Mechanical jointing fittings
ASTM F1387-19 管道和管道机械连接管件的性能标准规范
1.1 This specification establishes the performance characteristics required for mechanically attached fittings (MAFs) for use in piping and tubing
Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM F138-00 管道系统和配管的机械连接管件性能的标准规范
1.1 This specification covers the requirements for wrought 18 chromium-14 nickel-2.5 molybdenum stainless steel bar and wire used
Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
ASTM F1387-99(2012 管道系统和配管的机械连接管件性能的标准规范
1.1 This specification establishes the performance characteristics required for mechanically attached fittings (MAFs) for use in piping
Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
AS 2537/AMD 1:2002 冷热水设备用交联耦合聚乙烯管(PE-X)的机械连接管件
The 1994 edition of AS 2537 is amended as follows; the amendments should be inserted in the appropriate places
Mechanical jointing fittings for use with cross-linked polyethylene pipe (PE-X) for hot and cold water applications; Amendment No.1
ISO 9625:1993 灌溉用聚乙烯压力管的机械式连接管件
Specifies the requirements and test methods (classification, materials, workmanship and appearance, design, mechanical and hydraulic characteristics
Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
ISO 14531-3:2010 塑料管和管件.气体燃料输送用交联聚乙烯(PE-X)管系.公制系列.规格第3部分:机械连接管件(包括PE-X金属接管)
This part of ISO 14531 specifies the physical properties and mechanical-performance requirements for full-end-load-resistant mechanical fittings
Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)
T/CISA 007-2019 内衬不锈钢机械连接复合管件
本标准规定了内衬不锈钢机械连接复合管件的分类、代号及标记、订货内容、要求、试验方法、检验规则、标志、包装、运输和贮存
Mechanical connection composite fittings stainless steel lined
NF T54-051:1979 聚乙烯管件.机械管件连接系统的压降.试验方法和要求
Polyethylene pipes. Pressure drop in mechanical pipe-jointing systems. Method of test and requirements.
ASTM F1387-23 管道和卡套管机械连接配件性能标准规范
Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ANSI/ASTM F2176:2002 聚乙烯管道及内管道用机械连接件规范
This specification establishes requirements for material, performance, workmanship and test methods for the qualification of 2 in. and smaller
Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
ASTM F2176-02(2009 聚乙烯管道及内管道用机械连接件规范
1.1 This specification establishes requirements for material, performance, workmanship and test methods for the qualification of 2 in.
Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
SFS 3467-1988 塑料管．PEM煤气管和PEH煤气管以及相应的管部件．机械连接
T?ss? standardissa esitet??n yleiset vaatimukset ja testausmenetelm?t PEM- ja PEH-kaasuputkien mekaanisille liitoksille, kun PEM- ja PEH-kaasuputkia
ASTM F2176-02 机械连接件用聚乙烯导管,排泄管和内部管道的标准规范
1.1 This specification establishes requirements for material, performance, workmanship and test methods for the qualification of 2 in. and smaller
Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
编辑：北检院编辑部
