制动盘(鼓)检测

JB/T 7001-2007 WGP型带制动盘鼓形齿式联轴器

本标准规定了WGP型带制动盘鼓形齿式联轴器（以下简称联轴器）的型式、基本参数和主要尺寸、技术要求、检验规则、标志、包装和贮存。 本标准适用于联结两同轴线的传动轴系，并具有补偿两轴相对偏移性能。工作温度-20℃～+100℃，传递公称转矩800N·m～180000N·m

WGP Curved-tooth coupling with brake disk

GOST 33545-2015 机动车辆. 惯性台架上制动盘鼓的试验规程

Motor vehicles. Test procedures of brake discs drums on the inertia bench

JB/T 7001-1993 WGP型带制动盘鼓形齿式联轴器 型式、参数与尺寸

本标准规定了WGP型带制动盘鼓形齿式联轴器的型式、基本参数和主要尺寸。 本标准规定的联轴器适用于联接水平两同轴线传动轴系。制动盘直径315～1000mm，传递公称转矩710～160000N·m

WGP type drum gear coupling with brake disc type, parameters and dimensions

SAE J79-1972 制动盘和鼓式热电偶安装

To provide a uniform method for installing thermocouples in automotive brake discs and drums. This SAE Recommended Practice describes two methods

Brake Disc and Drum Thermocouple Installation

SAE J79-2009 制动盘和鼓式热电偶安装

This SAE Recommended Practice describes two methods for installing thermocouples in automotive brake discs or drums for the purpose of indicating bulk

Brake Disc and Drum Thermocouple Installation

SAE J1671-2019 商用车外置式制动鼓/盘式轮毂接口尺寸

Outboard Mounted Brake Drum/Disc Wheel Hub Interface Dimensions - Commercial Vehicles

SAE J1671-1997 商用车外置式制动鼓/盘式轮毂接口尺寸

This SAE Recommended Practice contains dimensions and tolerances for outboard mounted brake drums and disc wheel hubs in the interface areas

Outboard Mounted Brake Drum/Disc Wheel Hub Interface Dimensions Commercial Vehicles

DIN 15437:1989 动力传动设备.制动鼓和制动盘.交付技术条件

The specifications according to this standard apply to brake drums and brake discs of drum brakes and disc brakes in driving gears in the field

Power transmission engineering; brake drums and brake discs; technical terms of delivery

ISO 6312:2001 道路车辆 制动衬片 盘式制动块和鼓式制动蹄组件的剪切试验程序

This International Standard specifies a method for measuring the strength of the bond connection between the lining material and the carrier in disc

Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies

KS R ISO 6312-2014(2019 道路车辆 - 制动衬片 - 盘式制动器和鼓式制动蹄组件的剪切试验程序

Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies

ISO 6312:2010 道路车辆.制动闸衬.圆盘制动片和鼓式制动器蹄片装置的剪切试验规程

Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies

KS R ISO 6312:2008 道路车辆.制动闸衬.圆盘制动片和鼓式制动器蹄片装置的剪切试验规程

이 표준은 디스크 브레이크 패드 및 드럼 브레이크 슈 어셈블리의 캐리어와 라이닝 재질 사이

Road vehicles-Brake linings-Shear test procedure for disc brake pad and drum brake shoe assemblies

KS R ISO 6312:2014 道路车辆 制动闸衬 圆盘制动片和鼓式制动器蹄片装置的剪切试验规程

이 표준은 디스크 브레이크 패드 및 드럼 브레이크 슈 어셈블리에서 캐리어와 라이닝 재료 사이의 본드 접합의 강도(전단강도)를 측정하는 방법에 대하여 규정한다. 이 표준은 도로 차량에 브레이크로 사용된 양쪽 타입을 일체로 성형되거나, 접착되는 어셈블리에 또는 기계적 유지

Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies

BS ISO 6312:2010 道路车辆.制动闸衬.圆盘制动片和鼓式制动器蹄片装置的剪切试验程序

Road vehicles. Brake linings. Shear test procedure for disc brake pad and drum brake shoe assemblies

SAE J1671-2015 外侧安装的制动鼓/盘轮毂接口尺寸 卡车和公共汽车

This recommended practice contains dimensions and tolerances for outboard mounted brake drums and disc wheel hubs in the interface areas

Outboard Mounted Brake Drum/Disc Wheel Hub Interface Dimensions - Truck and Bus

JB/T 7001-2007 WGP型带制动盘鼓形齿式联轴器

本标准规定了WGP型带制动盘鼓形齿式联轴器（以下简称联轴器）的型式、基本参数和主要尺寸、技术要求、检验规则、标志、包装和贮存。 本标准适用于联结两同轴线的传动轴系，并具有补偿两轴相对偏移性能。工作温度-20℃～+100℃，传递公称转矩800N·m～180000N·m

WGP Curved-tooth coupling with brake disk

GOST 33545-2015 机动车辆. 惯性台架上制动盘鼓的试验规程

Motor vehicles. Test procedures of brake discs drums on the inertia bench

JB/T 7001-1993 WGP型带制动盘鼓形齿式联轴器 型式、参数与尺寸

本标准规定了WGP型带制动盘鼓形齿式联轴器的型式、基本参数和主要尺寸。 本标准规定的联轴器适用于联接水平两同轴线传动轴系。制动盘直径315～1000mm，传递公称转矩710～160000N·m

WGP type drum gear coupling with brake disc type, parameters and dimensions

SAE J79-1972 制动盘和鼓式热电偶安装

To provide a uniform method for installing thermocouples in automotive brake discs and drums. This SAE Recommended Practice describes two methods

Brake Disc and Drum Thermocouple Installation

SAE J79-2009 制动盘和鼓式热电偶安装

This SAE Recommended Practice describes two methods for installing thermocouples in automotive brake discs or drums for the purpose of indicating bulk

Brake Disc and Drum Thermocouple Installation

SAE J1671-2019 商用车外置式制动鼓/盘式轮毂接口尺寸

Outboard Mounted Brake Drum/Disc Wheel Hub Interface Dimensions - Commercial Vehicles

SAE J1671-1997 商用车外置式制动鼓/盘式轮毂接口尺寸

This SAE Recommended Practice contains dimensions and tolerances for outboard mounted brake drums and disc wheel hubs in the interface areas

Outboard Mounted Brake Drum/Disc Wheel Hub Interface Dimensions Commercial Vehicles

DIN 15437:1989 动力传动设备.制动鼓和制动盘.交付技术条件

The specifications according to this standard apply to brake drums and brake discs of drum brakes and disc brakes in driving gears in the field

Power transmission engineering; brake drums and brake discs; technical terms of delivery

ISO 6312:2001 道路车辆 制动衬片 盘式制动块和鼓式制动蹄组件的剪切试验程序

This International Standard specifies a method for measuring the strength of the bond connection between the lining material and the carrier in disc

Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies

KS R ISO 6312-2014(2019 道路车辆 - 制动衬片 - 盘式制动器和鼓式制动蹄组件的剪切试验程序

Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies

ISO 6312:2010 道路车辆.制动闸衬.圆盘制动片和鼓式制动器蹄片装置的剪切试验规程

Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies

KS R ISO 6312:2008 道路车辆.制动闸衬.圆盘制动片和鼓式制动器蹄片装置的剪切试验规程

이 표준은 디스크 브레이크 패드 및 드럼 브레이크 슈 어셈블리의 캐리어와 라이닝 재질 사이

Road vehicles-Brake linings-Shear test procedure for disc brake pad and drum brake shoe assemblies

KS R ISO 6312:2014 道路车辆 制动闸衬 圆盘制动片和鼓式制动器蹄片装置的剪切试验规程

이 표준은 디스크 브레이크 패드 및 드럼 브레이크 슈 어셈블리에서 캐리어와 라이닝 재료 사이의 본드 접합의 강도(전단강도)를 측정하는 방법에 대하여 규정한다. 이 표준은 도로 차량에 브레이크로 사용된 양쪽 타입을 일체로 성형되거나, 접착되는 어셈블리에 또는 기계적 유지

Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies

BS ISO 6312:2010 道路车辆.制动闸衬.圆盘制动片和鼓式制动器蹄片装置的剪切试验程序

Road vehicles. Brake linings. Shear test procedure for disc brake pad and drum brake shoe assemblies

SAE J1671-2015 外侧安装的制动鼓/盘轮毂接口尺寸 卡车和公共汽车

This recommended practice contains dimensions and tolerances for outboard mounted brake drums and disc wheel hubs in the interface areas

Outboard Mounted Brake Drum/Disc Wheel Hub Interface Dimensions - Truck and Bus